Description
Raise your sound quality bar with the Hertz CENTO POWER CP 4.800, featuring Hi-Res Audio certification for a frequency response from 10 Hz to 41 kHz, delivering sound quality that captures every nuance of your music. This model combines a high power-to-size ratio with an efficiency greater than 85%, encapsulated in a durable aluminum diecast case for top-tier performance and a stylish appearance. This four-channel amplifier combines a high power-to-size ratio with a durable aluminum diecast case, providing top-tier performance and a stylish look. Its full Plug & Play connections ensure easy installation, while the advanced crossover filters and bass boost options allow for tailored sound customization. It is ideal for audiophiles seeking a blend of functionality and sleek design in their car audio system.
General Specs
Channels: 4 - 3 - 2
Amp class: D
POWER SUPPLY
Nominal power supply voltage (fuse): 11 ÷ 15 VDC (1 x 40 A)
Operating power supply voltage: 9 ÷ 18 VDC
Idling current: 1.15 A
Standby current draw: 4.2 uA
Consumption, MIN load impedance (Max Musical Power): 32 A
Remote IN: 4 ÷ 17 VDC (1 mA)
ART - Automatic Remote Turn on/off from SPK-IN (BTL radio only): 1.5 VDC
Efficiency: 85%
AMPLIFIER STAGE
Distortion - THD @ 100 Hz, 70% Rated Power: 0,02 %
Damping factor @ 1 kHz, 1W: 100
Bandwidth @ -3 dB: 10 Hz ÷ 47k Hz
S/N ratio (A-weighted @ 1 V Input): 101 dBA
Minimum load impedance
@ 4 Ch: 2 Ω
@ 3 Ch: 2 Ω + 2 Ω + 4 Ω
@ 2 Ch: 4 Ω
Adjustable Crossovers: yes
OUTPUT POWER
Output power (RMS) @ 1% THD:
4Ch @ 4Ω: 110 W x 4
4Ch @ 2Ω: 190 W x 4
3Ch @ 4Ω / 4Ω: 100 W x 2 + 400 W x 1
3Ch @ 2Ω / 4Ω: 190 W x 2 + 380 W x 1
2Ch @ 4Ω: 380 W x 2 (4Ω)
Total Power: 760 W
INPUTS / FILTERS
Inputs: Pre-In / Speaker-In
Pre Out: Full Range (Front)
Pre-In sensitivity: 0.32 ÷ 8 VRMS
Speaker-In sensitivity: 1.6 ÷ 40 VRMS
Front Ch Hi-Pass: Full / 50-4000Hz 12dB/Oct.
Front Ch Lo-Pass: Full / 50-4000Hz 12dB/Oct.
Rear Ch Hi-Pass: Full / 50-4000Hz 12dB/Oct.
Rear Ch Lo-Pass: Full / 50-4000Hz 12dB/Oct.
Bass Boost 50Hz: 0 ÷ 9 dB
Sub Remote Volume Control: -20 ÷ 6 dB (Active on Rear Ch with LPF ON)
General Specs
Channels: 4 - 3 - 2
Amp class: D
POWER SUPPLY
Nominal power supply voltage (fuse): 11 ÷ 15 VDC (1 x 40 A)
Operating power supply voltage: 9 ÷ 18 VDC
Idling current: 1.15 A
Standby current draw: 4.2 uA
Consumption, MIN load impedance (Max Musical Power): 32 A
Remote IN: 4 ÷ 17 VDC (1 mA)
ART - Automatic Remote Turn on/off from SPK-IN (BTL radio only): 1.5 VDC
Efficiency: 85%
AMPLIFIER STAGE
Distortion - THD @ 100 Hz, 70% Rated Power: 0,02 %
Damping factor @ 1 kHz, 1W: 100
Bandwidth @ -3 dB: 10 Hz ÷ 47k Hz
S/N ratio (A-weighted @ 1 V Input): 101 dBA
Minimum load impedance
@ 4 Ch: 2 Ω
@ 3 Ch: 2 Ω + 2 Ω + 4 Ω
@ 2 Ch: 4 Ω
Adjustable Crossovers: yes
OUTPUT POWER
Output power (RMS) @ 1% THD:
4Ch @ 4Ω: 110 W x 4
4Ch @ 2Ω: 190 W x 4
3Ch @ 4Ω / 4Ω: 100 W x 2 + 400 W x 1
3Ch @ 2Ω / 4Ω: 190 W x 2 + 380 W x 1
2Ch @ 4Ω: 380 W x 2 (4Ω)
Total Power: 760 W
INPUTS / FILTERS
Inputs: Pre-In / Speaker-In
Pre Out: Full Range (Front)
Pre-In sensitivity: 0.32 ÷ 8 VRMS
Speaker-In sensitivity: 1.6 ÷ 40 VRMS
Front Ch Hi-Pass: Full / 50-4000Hz 12dB/Oct.
Front Ch Lo-Pass: Full / 50-4000Hz 12dB/Oct.
Rear Ch Hi-Pass: Full / 50-4000Hz 12dB/Oct.
Rear Ch Lo-Pass: Full / 50-4000Hz 12dB/Oct.
Bass Boost 50Hz: 0 ÷ 9 dB
Sub Remote Volume Control: -20 ÷ 6 dB (Active on Rear Ch with LPF ON)