Description
Included in this kit
This bundle includes a JL Audio VX700/5i 5-channel Class D Amplifier with integrated DSP, 100 Watts x 4 @ 2 ohm + 300W x 1 @ 2 ohm - 14.4V, a JL Audio CS110LG-TW3:Single 10TW3 PowerWedge Sealed 2 Ohm, and a JL Audio DRC-205 Digital Remote Controller for JLID-equipped products - FiX, TwK processors and VXi Amplifiers.
1x JL Audio VX700/5i 5-channel Class D Amplifier with integrated DSP, 100 Watts x 4 @ 2 ohm + 300W x 1 @ 2 ohm - 14.4V - (VX700/5i)
5-Channel Class D System Amplifier with Integrated DSP, 100 W x 4 @ 4 Ī© + 300 W x 1 @ 2 Ī© - 14.4V
Designed to simplify great audio, every VXi amplifier combines our advanced NexD2ā¢ switching amplifier technology with an integrated, full-featured digital signal processor.
Employing our second generation NexD2ā¢ amplifier technology, the VX700/5i efficiently powers a complete audio system. It can drive four main speakers with 75 W x 4 @ 4 ohms while also powering a subwoofer with up to 300W @ 2 ohms. Bridging the main channels converts it into a very powerful, 3-channel system amplifier with up to 200W x 2 @ 4 ohms on the main channels and 300W @ 2 ohms on the subwoofer channel.
The NexD2ā¢ full-range technology in the main channels of this amplifier is DSP-controlled and features a reduced loop area design utilizing DirectFETā¢ outputs for outstanding fidelity, very low noise and exceptional efficiency. The subwoofer channel features an optimized low-frequency variant of the NexD2ā¢ technology. The amplifier chassis is ultra-compact, with all connections on one side, to greatly simplify installation into tight spaces.
Instead of traditional control knobs and switches, all amplifier adjustments and DSP functionality are configured via a compatible external device (PC, Tablet or Smartphone), with the appropriate JL Audio TĆ¼Nā¢ Software application installed.
Amplifier includes: Power Connector (for 4 AWG wire), Analog Input/Pre-Out Harness, Speaker Output Harness, Subwoofer Output Harness, 6 ft A/B USB Cable
Features
TĆ¼NTM Software Applications
Intuitive setup and tuning, all at your fingertips. Automatically recognizes connected amplifier and displays appropriate interface. TĆ¼Nā¢ is available for download for free in a variety of applications, for computers and most handheld devices.
Unprecedented, Onboard DSP Tuning Power
- Premium, triple-core AKMĀ® DSP with an optimized configuration, developed in collaboration with AKMĀ®
- Hi-Res audio processing at 24 bit/96 kHz
- High-performance AKMĀ® A/D and D/A converters
- 10 Bands of fully parametric EQ, per output channel, including pre-outs
- Shelving EQ option for Band 1 and Band 10
- High-Pass & Low-Pass Filters for each output channel, with selectable alignments and slopes:
Linkwitz-Riley: 12, 24, 48 dB/octave
Butterworth: 6, 12, 18, 24, 36, 48 dB/octave - Signal Delay in 0.01 millisecond steps (equivalent to 1/8-inch, 3 mm)
- All-Pass Filter (Phase EQ), with variable "Q" and corner frequency
- Polarity Reversal (0 or 180 deg.)
- Output Level Trim in 0.1 dB steps
NexD2TM Switching Amplifier Technology
- Our latest generation of high-speed switching technology delivers superb low frequency power and efficiency.
- Specially optimized for subwoofer applications
Ultra-Versatile Analog and Digital Inputs
- High-performance, differential-balanced analog inputs for outstanding noise rejection
- Accepts speaker level signals from 200 mV, up to 16V RMS, including those from many factory systems
- Optical Digital (Toslink) input permits direct connection of S/PDIF digital sources, bypassing A/D converter. Accepts up to 24 bit/192 kHz input.
- Independently configurable RCA analog and digital pre-outs (24 bit/96 kHz)
- Automatic turn-on options via Signal-Sensing or DC-Offset sensing
Functional Compact Chassis Design
- Solid cast alloy main unibody and bottom plate deliver superb EMI performance and shielding
- All connections utilize compact mating connectors for maximum integrity and fitment into tight spaces.
- Configurable LED logo ring displays status and can display audio preset color code or user-defined color
- Logo badge can be oriented in 90 degree increments
- Corner caps engineered to conceal mounting holes and hardware
JLidTM System Command and Control with Networking Capabilities
JL Audio's digital protocol provides control interface and communication between VXi amplifiers and optional JLidTM accessories, including:
- DRC-100/DRC-200/DRC-205 Digital Remote Controllers: Offers convenient level and DSP preset control from the driver's seat.
- VXi-BTC BluetoothĀ® Communicator: Permits wireless configuration of VXi amplifiers using your compatible AppleĀ® or AndroidĀ® device.
- VXi-HUB Optical Network Hub: Provides network connectivity for up to five slave VXi amplifiers, allowing synchronization of DRC controllers and DSP presets. Up to two VXi-HUBs can be daisy-chained to network up to ten VXi amplifiers.
Apple is a trademark of Apple Inc., registered in the U.S. and other countries.
App Store is a service mark of Apple Inc., registered in the U.S. and other countries.
Google Play is a trademark of Google LLC.
Android is a trademark of Google LLC.
Rated Continuous (RMS) Power @ 14.4 V
| Main Channels @ 4 Ī© | 75 W RMS x 4 |
| Main Channels @ 2 Ī© | 100 W RMS x 4 |
| Main Channels - Bridged @ 4Ī© | 200 W RMS x 2 |
| Subwoofer Channel @ 4 Ī© | 180 W RMS x 1 |
| Subwoofer Channel @ 3 Ī© | 240 W RMS x 1 |
| Subwoofer Channel @ 2 Ī© | 300 W RMS x 1 |
| Subwoofer Channel @ 1.5 Ī© | N/A |
Rated Continuous (RMS) Power @ 12.5 V
| Main Channels @ 4 Ī© | 60 W RMS x 4 |
| Main Channels @ 2 Ī© | 90 W RMS x 4 |
| Main Channels - Bridged @ 4Ī© | 180 W RMS x 2 |
| Subwoofer Channel @ 4 Ī© | 180 W RMS x 1 |
| Subwoofer Channel @ 3 Ī© | 240 W RMS x 1 |
| Subwoofer Channel @ 2 Ī© | 300 W RMS x 1 |
| Subwoofer Channel @ 1.5 Ī© | N/A |
General Specifications
| Frequency Response (Main Channels) | 12 Hz - 24 kHz (+0, -1dB) |
| Frequency Response (Subwoofer Channel) | 12 Hz - 1 kHz (+0, -1dB) |
| S/N Ratio, referred to highest rated power (Analog Inputs - Main Channels) | 99 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to highest rated power (Analog Inputs - Subwoofer Channel) | 99 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W (Analog Inputs - Main Channels) | 80 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W (Analog Inputs - Subwoofer Channel) | 72 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to highest rated power (Digital Inputs - Main Channels) | 101 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to highest rated power (Digital Inputs - Subwoofer Channel) | 102 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W (Digital Inputs - Main Channels) | 82 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W (Digital Inputs - Subwoofer Channel) | 80 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Damping Factor @ 4 Ī© | >150 / 50 Hz |
| Damping Factor @ 2 Ī© | >50 / 50 Hz |
| THD+N @ Rated Power (Main Channels) | <1% @ 2 Ī© per Ch. |
| THD+N @ Rated Power (Subwoofer Channels) | <1% @ 2 Ī© per Ch. |
| Input Voltage Range @ RCA Inputs | 200 mV - 16 V RMS |
| Min.Copper Power / Ground Wire Gauge | 4 AWG wire |
| Fuse Rating | 60 A (AFS, AGU or MaxiFuseā¢) |
Physical Specifications
| Height (H) | 2.12 in / 54 mm |
| Width (W) | 9.81 in / 250 mm |
| Depth (D) | 6.62 in / 168 mm |
| Net Weight | 5.6 lb / 2.54 kg |
1x JL Audio CS110LG-TW3:Single 10TW3 PowerWedge Sealed 2 Ohm - (CS110LG-TW3)
JL Audio CS110LG-TW3:Ā Single 10TW3 PowerWedge Sealed 2 Ī©
Enclosed Subwoofer System with Single 10TW3-D4 Subwoofer Driver, Black Carpet (400 W, 2 Ī©) - Sealed Enclosure
In this low-profile PowerWedgeā¢ subwoofer system, we harness the performance of the 10TW3 to deliver amazing sub-bass from an enclosure that is only 4.5 in. (114 mm) deep.
This low-profile enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 10TW3-D4 and has been fine-tuned through extensive real-world listening.
The PowerWedgeā¢ subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal.
Finish: Black, high-grade automotive carpet with "JL AUDIO" embroidered in silver on the front baffle. A steel mesh grille is included to protect the subwoofer driver.
Construction: CNC-Cut High-Grade MDF
Recommended amplifier power: 100 - 400W
Nominal Impedance: 2 Ī©
1x JL Audio DRC-205 Digital Remote Controller for JLID-equipped products - FiX, TwK processors and VXi Amplifiers - (DRC-205)
DRC-205
Digital Remote Control for JLidā¢ compatible products
The DRC-205 is a panel-mount, wired digital remote controller designed to connect to the JLidā¢ port of compatible JL Audio electronics.
Functions:
Dual-concentric rotary controls with stops
Push-button mode selector
Status indicator (RGB LED)
Common uses include:
Master Volume
Subwoofer Volume
Preset or Mode Selection
The specific audio functionality of the DRC-205 controller will be determined by the device it is connected to.
The DRC-205 is compatible with the following JL Audio products:
FiXā¢ OEM Integration DSP: All models
TwKā¢ System Tuning DSP: All models
VXi-Series Amplifiers: All models