Description
Included in this kit
This bundle includes 1x JL Audio SBX-F-BRONCG6/10TW1 - Stealthbox for 2021-Up Ford Bronco 2-Door & 4-Door, 2x JL Audio C2-400x:4-inch (100 mm) Coaxial Speaker System (Pair), 1x JL Audio C2-650x:6.5-inch (165 mm) Coaxial Speaker System (Pair), and 1x JL Audio XDM700/5 XDM Series 5-Channel Class-D Full Range Car/Marine Amplifier, 700 W.
1x JL Audio SBX-F-BRONCG6/10TW1 - Stealthbox for 2021-Up Ford Bronco 2-Door & 4-Door - (SBX-F-BRONCG6/10TW1)
JL Audio SBX-F-BRONCG6/10TW1 - Stealthbox for 2021-Up Ford Bronco 2-Door & 4-Door
Will not fit Bronco Sport models.Fordās legendary SUV combines cool retro styling with impressive on- and off-road capabilities, along with a highly functional interior for passengers and cargo alike. If you're looking for an upgrade to he factory audio options, the Stealthbox model offers meaningful bass reproduction. Featuring a rugged, custom-molded sealed enclosure, this Stealthbox model houses an innovative, 10-inch TW1 thin-line driver and installs behind the passenger side panel in the cargo area. The result is powerful, deep bass thatās worthy of Fordās celebrated nameplate.
The Hard Data: Contains one 10TW1-2 subwoofer in a sealed enclosure; 300-watt power handling; wired for 2-ohm mono. Installs behind factory panel in the passenger side rear cargo area. Subwoofer is protected by a black steel mesh grille and concealed by a cosmetic grille (both included). Installation requires removal of OEM subwoofer (if equipped) and permanent modification of the factory panel. Fits 2-door and 4-door models.
Will not fit Bronco Sport models.
2x JL Audio C2-400x:4-inch (100 mm) Coaxial Speaker System (Pair) - (C2-400x)
JL Audio C2-400x:Ā 4-inch (100 mm) Coaxial Speaker System
Coaxial Speaker System: 4-inch (100 mm) Woofer, 0.75-inch (19 mm) Silk Dome Tweeter
The Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and precision-engineered woofer designs.
The C2-400x system features 4-inch (100 mm) woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems.
Breakaway mounting tabs on the woofer frame allow the C2-400x to be installed in four-hole or two-hole configurations. Injection-Molded adaptor plates are also included to allow mounting of the C2-400x speakers into a 4 x 6 (100 x 150 mm) speaker location.
Tweeters are coaxially mounted and built with 0.75-inch silk dome diaphragms that deliver smooth, extended response, on and off axis. The small size of the C2 tweeter minimizes tweeter protrusion, allowing C2 coaxials to fit behind most factory speaker grilles.
Speaker grilles are included, each consisting of a black grille tray with satin silver accents and a black steel mesh grille with an electroformed JL Audio logo.
Sonic character: Clean and Dynamic
Sold as a pair.
1x JL Audio C2-650x:6.5-inch (165 mm) Coaxial Speaker System (Pair) - (C2-650x)
JL Audio C2-650x:Ā 6.5-inch (165 mm) Coaxial Speaker System
Coaxial Speaker System: 6.5-inch (165 mm) Woofer, 0.75-inch (19 mm) Silk Dome Tweeter
The Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and precision-engineered woofer designs.
The C2-650x system features 6.5-inch (165 mm) woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems.
The 6.5-inch (165 mm) format is a direct fit in many vehicles. Multiple mounting patterns are provided on the woofer frame for easy installation into most vehicles that accept a 6.5-inch (165 mm) speaker.
Tweeters are coaxially mounted and built with 0.75-inch silk dome diaphragms that deliver smooth, extended response, on and off axis. The small size of the C2 tweeter minimizes tweeter protrusion, allowing C2 coaxials to fit behind most factory speaker grilles.
Woofer grilles are included, each consisting of a black grille tray with satin silver accents and a black steel mesh grille with an electroformed JL Audio logo.
Sonic character: Clean and Dynamic
Sold as a pair.
1x JL Audio XDM700/5 XDM Series 5-Channel Class-D Full Range Car/Marine Amplifier, 700 W - (XDM700/5)
JL Audio XDM700/5 5-Channel Class D Car/Marine System Amplifier, 75 W x 4 @ 4 Ī© + 300 W x 1 @ 2 Ī© - 14.4V
The XDM700/5 is ideal for a complete audiophile-grade, subwoofer + four satellite system, and fits comfortably in just about any vehicle or vessel. With this incredible little amplifier, you can drive two pairs of quality component speaker systems with plenty of clean power (75 W x 4 @ 4 Ī©), while also generating a solid 300 W of power for a subwoofer system. The technology that makes this much power possible in such a small chassis is JL Audio's high-speed NexDā¢ switching amplifier design.
Suitable for car or boat installations, the XDM700/5 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.
The XDM700/5 includes a 12 dB / octave high-pass filter for one main channel pair, a 12 dB octave high-pass or bandpass filter for the other main channel pair, plus a variable slope low-pass filter for its subwoofer channel. All three filters offer continuously variable cutoff frequency selection from 50-500 Hz. This amplifier's filters can also be configured as a true 3-way crossover, with a low-pass filter for the subwoofer channel, a bandpass filter on Ch. 3 & 4, and a high-pass filter on Ch. 1 & 2. An "x10" multiplier switch on the Ch. 1 & 2 high-pass filter allows its cutoff frequency to be adjusted from 50-500 Hz or 500-5000 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you have the ability to adjust the level of all amplifier channels or just the subwoofer channel directly from the driver's seat or helm.
Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.
Specifications
Rated Continuous (RMS) Power @ 14.4 V
| Main Channels @ 4 Ī© | 75 W RMS x 4 |
| Main Channels @ 2 Ī© | 100 W RMS x 4 |
| Main Channels - Bridged @ 4Ī© | 200 W RMS x 2 |
| Subwoofer Channel @ 4 Ī© | 180 W RMS x 1 |
| Subwoofer Channel @ 3 Ī© | 240 W RMS x 1 |
| Subwoofer Channel @ 2 Ī© | 300 W RMS x 1 |
| Subwoofer Channel @ 1.5 Ī© | N/A |
Rated Continuous (RMS) Power @ 12.5 V
| Main Channels @ 4 Ī© | 60 W RMS x 4 |
| Main Channels @ 2 Ī© | 90 W RMS x 4 |
| Main Channels - Bridged @ 4Ī© | 180 W RMS x 2 |
| Subwoofer Channel @ 4 Ī© | 180 W RMS x 1 |
| Subwoofer Channel @ 3 Ī© | 240 W RMS x 1 |
| Subwoofer Channel @ 2 Ī© | 300 W RMS x 1 |
| Subwoofer Channel @ 1.5 Ī© | N/A |
General Specifications
| Frequency Response (Main Channels) | 12 Hz - 22 kHz (+0, -1dB) |
| Frequency Response (Subwoofer Channel) | 10 Hz - 1 kHz (+0, -1dB) |
| S/N Ratio, referred to highest rated power (Main Channels) | >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W | >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Damping Factor @ 4 Ī© | >150 / 50 Hz |
| Damping Factor @ 2 Ī© | >75 / 50 Hz |
| THD+N @ Rated Power (Main Channels) | <1% @ 2 Ī© per Ch. |
| THD+N @ Rated Power (Subwoofer Channels) | <1% @ 2 Ī© per Ch. |
| Input Voltage Range @ RCA Inputs | 200 mV - 4 V RMS |
| Min.Copper Power / Ground Wire Gauge | 4 AWG wire |
| Fuse Rating | 60 A (AFS, AGU or MaxiFuseā¢) |
Signal Processing
| Filter Mode(s): Channels 1 & 2 (front) | High-Pass only |
| Filter Slope(s): Channels 1 & 2 (front) | 12 dB/octave |
| Filter Frequency Range: Channels 1 & 2 (front) | 50 Hz - 5 kHz |
| Filter Mode(s): Channels 3 & 4 (rear) | High-Pass or Bandpass |
| Filter Slope(s): Channels 3 & 4 (rear) | 12 dB/octave |
| Filter Frequency Range: Channels 3 & 4 | 50 Hz - 500 Hz |
| Filter Mode(s): Subwoofer Channel | Low-Pass only |
| Filter Slope(s): Subwoofer Channel | 12/24 dB/octave |
| Filter Frequency Range: Subwoofer Channel | 50 Hz - 500 Hz |
| Detented, Calibrated Filter Freq. Potentiometers | Yes |
| Filter Defeat Function | Yes |
| Infrasonic Filter: Subwoofer Channel | none |
| Remote Level Control | Optional HD-RLC or MHD-RLC (water-resistant) |
| Remote Level Modes | Sub Ch. or All Channels |
| Channel Input Mode Switch | Yes (2/4/6 ch.) |
| Pass-Through Preamp Output | None |
| Source Channel Selection for PreOuts | N/A |
Physical Specifications
| Height (H) | 2.05 in / 52 mm |
| Width (W) | 10.23 in / 260 mm |
| Depth (D) | 7.09 in / 180 mm |
| Net Weight | 6.15 lb / 2.79 kg |