Included in this kit

---

This bundle includes a JL Audio RD1500/1 Monoblock Class D Full-Range Amplifier, 750 Watts x 1 @ 4 ohm / 1500 Watts x 1 @ 2 or 1 ohm - 14.4V, and a JL Audio CLS112RG-W7AE:Single 12W7AE ProWedge Sealed 3 Ohm.

1x JL Audio RD1500/1 Monoblock Class D Full-Range Amplifier, 750 Watts x 1 @ 4 ohm / 1500 Watts x 1 @ 2 or 1 ohm - 14.4V - (RD1500/1)

Engineered for high-power, subwoofer applications, the RD1500/1 monoblock amplifier is built to deliver staggering amounts of world-class bass output. Equipped with a special low impedance circuit, the RD1500/1 is capable of generating a whopping 1500 watts of output power, at either 1 or 2 ohms (14.4V, 1% THD). At the heart of this ultra-sleek and compact power plant is JL Audio's exclusive NexD Class D technology, permitting high power output with exceptional efficieny and low distortion.

For your convenience, all of the RD1500/1's controls are located on top of the amplifier, beneath a protective cover, with all connections found along one side of its chassis. Signal processing features include a 12 dB / octave low-pass filter, with continuously variable frequency selection from 50-500 Hz, and a variable bass boost EQ. Dual-range, differential-balance inputs are also onboard, capable of accepting most input voltage levels.

The RD1500/1 is also equipped with an onboard LED-clipping indicator. This all-new, innovative feature lets you easily set your amplifier's input sensitivity setting, quickly and accurately, with no special equipment needed. The RD1500/1 features a durable, black powder-coated finish and a top-mounted, dual-color LED light strip that reports the overall status and condition.

Specifications -
Frequency Response: 7 Hz - 500 Hz (+0, -1 dB)
S/N Ratio, referred to highest rated power: >82 dB below rated power (A-weighted, 20 Hz - kHz noise bandwidth)
S/N Ratio, referred to 1W: >50 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
Damping Factor @ 4 Ohms: >1100 / 50 Hz
Damping Factor @ 2 Ohms: >550 / 50 Hz
THD+N @ Rated Power: <1% @ 2 Ohms per Ch.
Input Voltage Range @ RCA Inputs: Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High)
Min.Copper Power / Ground Wire Gauge: 2 AWG Wire
Fuse Rating: 150A (AFS or AGU)

1x JL Audio CLS112RG-W7AE:Single 12W7AE ProWedge Sealed 3 Ohm - (CLS112RG-W7AE)

JL Audio CLS112RG-W7AE: Single 12W7AE ProWedge Sealed 3 Ω

Enclosed Subwoofer System with Single 12W7AE-3 Subwoofer Driver, Black Carpet (1000 W, 3 Ω) - Sealed Enclosure

For those who seek the ultimate in compact-enclosure sub-bass fidelity, we offer this sealed ProWedge™ system, in which the superb performance capabilities of the W7AE subwoofer driver are harnessed within a compact, sealed enclosure. This system has it all: extension, impact, detail and smooth response... at any listening level.

This enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 12W7AE-3 and has been fine-tuned through extensive real-world listening.

This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal.

The angled-back design saves precious cargo space by allowing the enclosure to fit tightly against the back of a vehicle's rear seat.

Finish: Black, high-grade automotive carpet, with gloss-black laminated decorative front baffle trim. Three solid aluminum bars provide stylish and rugged woofer protection.

Construction: CNC-Cut High-Grade MDF

Recommended amplifier power: 400 - 1000W

Nominal Impedance: 3 Ω