Included in this kit

---

This bundle includes a JL Audio RD1500/1 Monoblock Class D Full-Range Amplifier, 750 Watts x 1 @ 4 ohm / 1500 Watts x 1 @ 2 or 1 ohm - 14.4V, a JL Audio CLS112RG-W7AE:Single 12W7AE ProWedge Sealed 3 Ohm, a JL Audio HD-RLC:Amplifier Remote Level Control and Cable, a JL Audio XD-PCS1/0-2B: Premium 1/0 AWG 12 V Power Connection Kit, Two Amplifiers, and a JL Audio XE-BLKAIC2-18 2-Channel Twisted-Pair RCA Audio Interconnect w/ Machined Connectors - 18 ft. / 5.49 m.

1x JL Audio RD1500/1 Monoblock Class D Full-Range Amplifier, 750 Watts x 1 @ 4 ohm / 1500 Watts x 1 @ 2 or 1 ohm - 14.4V - (RD1500/1)

Engineered for high-power, subwoofer applications, the RD1500/1 monoblock amplifier is built to deliver staggering amounts of world-class bass output. Equipped with a special low impedance circuit, the RD1500/1 is capable of generating a whopping 1500 watts of output power, at either 1 or 2 ohms (14.4V, 1% THD). At the heart of this ultra-sleek and compact power plant is JL Audio's exclusive NexD Class D technology, permitting high power output with exceptional efficieny and low distortion.

For your convenience, all of the RD1500/1's controls are located on top of the amplifier, beneath a protective cover, with all connections found along one side of its chassis. Signal processing features include a 12 dB / octave low-pass filter, with continuously variable frequency selection from 50-500 Hz, and a variable bass boost EQ. Dual-range, differential-balance inputs are also onboard, capable of accepting most input voltage levels.

The RD1500/1 is also equipped with an onboard LED-clipping indicator. This all-new, innovative feature lets you easily set your amplifier's input sensitivity setting, quickly and accurately, with no special equipment needed. The RD1500/1 features a durable, black powder-coated finish and a top-mounted, dual-color LED light strip that reports the overall status and condition.

Specifications -
Frequency Response: 7 Hz - 500 Hz (+0, -1 dB)
S/N Ratio, referred to highest rated power: >82 dB below rated power (A-weighted, 20 Hz - kHz noise bandwidth)
S/N Ratio, referred to 1W: >50 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
Damping Factor @ 4 Ohms: >1100 / 50 Hz
Damping Factor @ 2 Ohms: >550 / 50 Hz
THD+N @ Rated Power: <1% @ 2 Ohms per Ch.
Input Voltage Range @ RCA Inputs: Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High)
Min.Copper Power / Ground Wire Gauge: 2 AWG Wire
Fuse Rating: 150A (AFS or AGU)

1x JL Audio CLS112RG-W7AE:Single 12W7AE ProWedge Sealed 3 Ohm - (CLS112RG-W7AE)

JL Audio CLS112RG-W7AE: Single 12W7AE ProWedge Sealed 3 Ω

Enclosed Subwoofer System with Single 12W7AE-3 Subwoofer Driver, Black Carpet (1000 W, 3 Ω) - Sealed Enclosure

For those who seek the ultimate in compact-enclosure sub-bass fidelity, we offer this sealed ProWedge™ system, in which the superb performance capabilities of the W7AE subwoofer driver are harnessed within a compact, sealed enclosure. This system has it all: extension, impact, detail and smooth response... at any listening level.

This enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 12W7AE-3 and has been fine-tuned through extensive real-world listening.

This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal.

The angled-back design saves precious cargo space by allowing the enclosure to fit tightly against the back of a vehicle's rear seat.

Finish: Black, high-grade automotive carpet, with gloss-black laminated decorative front baffle trim. Three solid aluminum bars provide stylish and rugged woofer protection.

Construction: CNC-Cut High-Grade MDF

Recommended amplifier power: 400 - 1000W

Nominal Impedance: 3 Ω

1x JL Audio HD-RLC:Amplifier Remote Level Control and Cable - (HD-RLC)

JL Audio HD-RLC: Amplifier Remote Level Control and Cable

Remote Level Control for Select JL Audio Amplifiers

The HD-RLC remotely controls the Bass Level of the following JL Audio amplifiers:

HD-Series: All models

XD-Series: All models

MHD-Series: All models

M-Series: All models

When the HD-RLC is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.

The HD-RLC kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. (5.5 m) cable.

A satin-finish aluminum knob can be purchased separately.

1x JL Audio XD-PCS1/0-2B: Premium 1/0 AWG 12 V Power Connection Kit, Two Amplifiers - (XD-PCS1/0-2B)

XD-PCS1/0-2B

Premium 1/0 AWG 12V Power Connection System for Two Amplifiers

Everything* you need to make secure, high-integrity power connections to two amplifiers with combined fuse ratings up to 200A. This kit features our high-capacity ANL Master Fuse Block, a Maxi®-fused distribution block and our bolt-on master ground lug, for maximum performance.

What's in the kit?

XD-MFBU-ANL Fuse Holder with 200A ANL Blade Fuse

XD-FDBU-2 Fused Distribution Block*

20 ft. (6.1 m) Blue 1/0 AWG Premium Power Wire, terminated with ring

8 ft. (2.4 m) Blue 4 AWG Premium Power Wire

8 ft. (2.4 m) Clear 4 AWG Premium Ground Wire, terminated with a ring on each end

20 ft. (6.1 m) Blue Remote Turn-On Lead Wire

Bolt-On Master Ground Lug

Rubber Firewall Grommet

Nylon Wire Ties

Hex Wrench for Fuse Holder

Bonus: Additional 1-year warranty on JL Audio amplifier when installed by authorized dealer with this Power Connection System!

The supplied 200A ANL blade fuse installs into the Master Fuse Block near the battery. It is appropriate to protect the main power wire in the event of a short circuit. *You will also need to purchase the appropriate Maxi® fuses for installation into the Fused Distribution Block. These need to be selected based on the specific fuse rating of the amplifiers you are installing and, for that reason, are not included with this kit.

1x JL Audio XE-BLKAIC2-18 2-Channel Twisted-Pair RCA Audio Interconnect w/ Machined Connectors - 18 ft. / 5.49 m - (XE-BLKAIC2-18)

JL Audio XE-BLKAIC2-18 2-Channel Twisted-Pair Audio Interconnect w/ Machined Connectors - 18 ft. / 5.49 m

ECS premium audio interconnect cables begin with small diameter silver-plated OFC copper conductors with Teflon® dielectrics constructed in a tight twisted-pair arrangement for optimum noise rejection. An overmolded strain-relief secures the silver-soldered connections inside the machined brass connector ends and splitters for maximum durability.

The RCA plug barrels are short by design to facilitate installation in tight spaces while an extremely supple cable, protected by braided black outer jacket, provides a sleek look in any installation.

• Twisted-Pair Construction to Reject Noise
• Silver-Plated, pure OFC Copper Conductors with Teflon® Dielectrics
• Silver-Soldered Connections with overmolded strain-relief
• Machined Brass Connector Bodies and Cable-Splitter with Marine-rated corrosion-resistant plating
• Braided black outer jacket for protection from abrasion
• Compact connector design for installation in tight spaces