Description
Included in this kit
This bundle includes a JL Audio CLS112RG-W7AE:Single 12W7AE ProWedge Sealed 3 Ohm, a JL Audio HD-RLC:Amplifier Remote Level Control and Cable, a JL Audio XD-PCS1/0-2B: Premium 1/0 AWG 12 V Power Connection Kit, Two Amplifiers, a JL Audio XE-BLKAIC2-18 2-Channel Twisted-Pair RCA Audio Interconnect w/ Machined Connectors - 18 ft. / 5.49 m, and a JL Audio HD1200/1:Monoblock Class D Wide-Range Amplifier 1200 W.
1x JL Audio CLS112RG-W7AE:Single 12W7AE ProWedge Sealed 3 Ohm - (CLS112RG-W7AE)
JL Audio CLS112RG-W7AE:Ā Single 12W7AE ProWedge Sealed 3 Ī©
Enclosed Subwoofer System with Single 12W7AE-3 Subwoofer Driver, Black Carpet (1000 W, 3 Ī©) - Sealed Enclosure
For those who seek the ultimate in compact-enclosure sub-bass fidelity, we offer this sealed ProWedgeā¢ system, in which the superb performance capabilities of the W7AE subwoofer driver are harnessed within a compact, sealed enclosure. This system has it all: extension, impact, detail and smooth response... at any listening level.
This enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 12W7AE-3 and has been fine-tuned through extensive real-world listening.
This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal.
The angled-back design saves precious cargo space by allowing the enclosure to fit tightly against the back of a vehicle's rear seat.
Finish: Black, high-grade automotive carpet, with gloss-black laminated decorative front baffle trim. Three solid aluminum bars provide stylish and rugged woofer protection.
Construction: CNC-Cut High-Grade MDF
Recommended amplifier power: 400 - 1000W
Nominal Impedance: 3 Ī©
1x JL Audio HD-RLC:Amplifier Remote Level Control and Cable - (HD-RLC)
JL Audio HD-RLC:Ā Amplifier Remote Level Control and Cable
Remote Level Control for Select JL Audio Amplifiers
The HD-RLC remotely controls the Bass Level of the following JL Audio amplifiers:
HD-Series: All models
XD-Series: All models
MHD-Series: All models
M-Series: All models
When the HD-RLC is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.
The HD-RLC kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. (5.5 m) cable.
A satin-finish aluminum knob can be purchased separately.
1x JL Audio XD-PCS1/0-2B: Premium 1/0 AWG 12 V Power Connection Kit, Two Amplifiers - (XD-PCS1/0-2B)
XD-PCS1/0-2B
Premium 1/0 AWG 12V Power Connection System for Two Amplifiers
Everything* you need to make secure, high-integrity power connections to two amplifiers with combined fuse ratings up to 200A. This kit features our high-capacity ANL Master Fuse Block, a MaxiĀ®-fused distribution block and our bolt-on master ground lug, for maximum performance.
What's in the kit?
XD-MFBU-ANL Fuse Holder with 200A ANL Blade Fuse
XD-FDBU-2 Fused Distribution Block*
20 ft. (6.1 m) Blue 1/0 AWG Premium Power Wire, terminated with ring
8 ft. (2.4 m) Blue 4 AWG Premium Power Wire
8 ft. (2.4 m) Clear 4 AWG Premium Ground Wire, terminated with a ring on each end
20 ft. (6.1 m) Blue Remote Turn-On Lead Wire
Bolt-On Master Ground Lug
Rubber Firewall Grommet
Nylon Wire Ties
Hex Wrench for Fuse Holder
Bonus: Additional 1-year warranty on JL Audio amplifier when installed by authorized dealer with this Power Connection System!
The supplied 200A ANL blade fuse installs into the Master Fuse Block near the battery. It is appropriate to protect the main power wire in the event of a short circuit. *You will also need to purchase the appropriate MaxiĀ® fuses for installation into the Fused Distribution Block. These need to be selected based on the specific fuse rating of the amplifiers you are installing and, for that reason, are not included with this kit.
1x JL Audio XE-BLKAIC2-18 2-Channel Twisted-Pair RCA Audio Interconnect w/ Machined Connectors - 18 ft. / 5.49 m - (XE-BLKAIC2-18)
JL Audio XE-BLKAIC2-18 2-Channel Twisted-Pair Audio Interconnect w/ Machined Connectors - 18 ft. / 5.49 m
ECS premium audio interconnect cables begin with small diameter silver-plated OFC copper conductors with TeflonĀ® dielectrics constructed in a tight twisted-pair arrangement for optimum noise rejection. An overmolded strain-relief secures the silver-soldered connections inside the machined brass connector ends and splitters for maximum durability.The RCA plug barrels are short by design to facilitate installation in tight spaces while an extremely supple cable, protected by braided black outer jacket, provides a sleek look in any installation.
ā¢ Twisted-Pair Construction to Reject Noise
ā¢ Silver-Plated, pure OFC Copper Conductors with TeflonĀ® Dielectrics
ā¢ Silver-Soldered Connections with overmolded strain-relief
ā¢ Machined Brass Connector Bodies and Cable-Splitter with Marine-rated corrosion-resistant plating
ā¢ Braided black outer jacket for protection from abrasion
ā¢ Compact connector design for installation in tight spaces
1x JL Audio HD1200/1:Monoblock Class D Wide-Range Amplifier 1200 W - (HD1200/1)
JL Audio HD1200/1:Ā Monoblock Class D Wide-Range Amplifier 1200 W
Monoblock Class D Wide-Range Amplifier, 1200 W x 1 @ 1.5-4 Ī©
Our most power amplifier ever employs our advanced Single-Cycle Control switching design and R.I.P.S. technology to deliver 1200 W of clean power into any impedance between 1.5 and 4 Ī©, giving you the highest degree of flexibility in designing your subwoofer system. Tight power supply regulation keeps distortion down and maximizes your bass quality. From a pure sound quality perspective, we invite you to compare the real-world, in-car performance of this amplifier to any other amplifier on the market, of any type, at any price.
While targeted primarily to subwoofer applications, the HD1200/1 is a wide-range amplifier and can also be used to drive high-performance mid-range speaker systems.
This amplifier features a brushed aluminum finish with black powder-coated cast alloy heat sinks and bottom panel. A black powder-coated, gasketed cover is also provided to protect the controls.