Included in this kit

---

This bundle includes a JL Audio RD1500/1 Monoblock Class D Full-Range Amplifier, 750 Watts x 1 @ 4 ohm / 1500 Watts x 1 @ 2 or 1 ohm - 14.4V, a JL Audio XE-BLKAIC2-18 2-Channel Twisted-Pair RCA Audio Interconnect w/ Machined Connectors - 18 ft. / 5.49 m, and a JL Audio XD-PCS1/0-2B: Premium 1/0 AWG 12 V Power Connection Kit, Two Amplifiers.

1x JL Audio RD1500/1 Monoblock Class D Full-Range Amplifier, 750 Watts x 1 @ 4 ohm / 1500 Watts x 1 @ 2 or 1 ohm - 14.4V - (RD1500/1)

Engineered for high-power, subwoofer applications, the RD1500/1 monoblock amplifier is built to deliver staggering amounts of world-class bass output. Equipped with a special low impedance circuit, the RD1500/1 is capable of generating a whopping 1500 watts of output power, at either 1 or 2 ohms (14.4V, 1% THD). At the heart of this ultra-sleek and compact power plant is JL Audio's exclusive NexD Class D technology, permitting high power output with exceptional efficieny and low distortion.

For your convenience, all of the RD1500/1's controls are located on top of the amplifier, beneath a protective cover, with all connections found along one side of its chassis. Signal processing features include a 12 dB / octave low-pass filter, with continuously variable frequency selection from 50-500 Hz, and a variable bass boost EQ. Dual-range, differential-balance inputs are also onboard, capable of accepting most input voltage levels.

The RD1500/1 is also equipped with an onboard LED-clipping indicator. This all-new, innovative feature lets you easily set your amplifier's input sensitivity setting, quickly and accurately, with no special equipment needed. The RD1500/1 features a durable, black powder-coated finish and a top-mounted, dual-color LED light strip that reports the overall status and condition.

Specifications -
Frequency Response: 7 Hz - 500 Hz (+0, -1 dB)
S/N Ratio, referred to highest rated power: >82 dB below rated power (A-weighted, 20 Hz - kHz noise bandwidth)
S/N Ratio, referred to 1W: >50 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
Damping Factor @ 4 Ohms: >1100 / 50 Hz
Damping Factor @ 2 Ohms: >550 / 50 Hz
THD+N @ Rated Power: <1% @ 2 Ohms per Ch.
Input Voltage Range @ RCA Inputs: Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High)
Min.Copper Power / Ground Wire Gauge: 2 AWG Wire
Fuse Rating: 150A (AFS or AGU)

1x JL Audio XE-BLKAIC2-18 2-Channel Twisted-Pair RCA Audio Interconnect w/ Machined Connectors - 18 ft. / 5.49 m - (XE-BLKAIC2-18)

JL Audio XE-BLKAIC2-18 2-Channel Twisted-Pair Audio Interconnect w/ Machined Connectors - 18 ft. / 5.49 m

ECS premium audio interconnect cables begin with small diameter silver-plated OFC copper conductors with Teflon® dielectrics constructed in a tight twisted-pair arrangement for optimum noise rejection. An overmolded strain-relief secures the silver-soldered connections inside the machined brass connector ends and splitters for maximum durability.

The RCA plug barrels are short by design to facilitate installation in tight spaces while an extremely supple cable, protected by braided black outer jacket, provides a sleek look in any installation.

• Twisted-Pair Construction to Reject Noise
• Silver-Plated, pure OFC Copper Conductors with Teflon® Dielectrics
• Silver-Soldered Connections with overmolded strain-relief
• Machined Brass Connector Bodies and Cable-Splitter with Marine-rated corrosion-resistant plating
• Braided black outer jacket for protection from abrasion
• Compact connector design for installation in tight spaces

1x JL Audio XD-PCS1/0-2B: Premium 1/0 AWG 12 V Power Connection Kit, Two Amplifiers - (XD-PCS1/0-2B)

XD-PCS1/0-2B

Premium 1/0 AWG 12V Power Connection System for Two Amplifiers

Everything* you need to make secure, high-integrity power connections to two amplifiers with combined fuse ratings up to 200A. This kit features our high-capacity ANL Master Fuse Block, a Maxi®-fused distribution block and our bolt-on master ground lug, for maximum performance.

What's in the kit?

XD-MFBU-ANL Fuse Holder with 200A ANL Blade Fuse

XD-FDBU-2 Fused Distribution Block*

20 ft. (6.1 m) Blue 1/0 AWG Premium Power Wire, terminated with ring

8 ft. (2.4 m) Blue 4 AWG Premium Power Wire

8 ft. (2.4 m) Clear 4 AWG Premium Ground Wire, terminated with a ring on each end

20 ft. (6.1 m) Blue Remote Turn-On Lead Wire

Bolt-On Master Ground Lug

Rubber Firewall Grommet

Nylon Wire Ties

Hex Wrench for Fuse Holder

Bonus: Additional 1-year warranty on JL Audio amplifier when installed by authorized dealer with this Power Connection System!

The supplied 200A ANL blade fuse installs into the Master Fuse Block near the battery. It is appropriate to protect the main power wire in the event of a short circuit. *You will also need to purchase the appropriate Maxi® fuses for installation into the Fused Distribution Block. These need to be selected based on the specific fuse rating of the amplifiers you are installing and, for that reason, are not included with this kit.