Description
Included in this kit
This bundle includes a JL Audio XDM200/2 XDM Series 2-Channel Class-D Full Range Car/Marine Amplifier, 200 W, and a JL Audio XD-ACS30:Amplifier Connection Kit 30 A capacity Single Amplifier.
1x JL Audio XDM200/2 XDM Series 2-Channel Class-D Full Range Car/Marine Amplifier, 200 W - (XDM200/2)
JL Audio XDM200/2 2-Channel Class D Full-Range Car/Marine Amplifier, 100 W x 2 @ 2 Ω / 75 W x 2 @ 4 Ω - 14.4V
The tiny XDM200/2 packs a serious full-range punch, delivering a staggering 100 watts per channel into 2 ohms (14.4V, 1% THD). The technology that makes this much power possible in such a compact chassis is JL Audio's advanced NexD™ high-speed switching design, which permits full bandwidth Class D operation with extremely low distortion and remarkable efficiency.
Suitable for car or boat installations, the XDM200/2 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.
The XDM200/2 includes a 12 dB / octave filter which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), the amplifier's level can be adjusted directly from the driver's seat or cockpit.
Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.
Specifications
Rated Continuous (RMS) Power @ 14.4 V
| @ 4 Ω | 75 W RMS x 2 |
| @ 2 Ω | 100 W RMS x 2 |
| Bridged @ 4Ω | 200 W RMS x 1 |
Rated Continuous (RMS) Power @ 12.5 V
| @ 4 Ω | 60 W RMS x 2 |
| @ 2 Ω | 90 W RMS x 2 |
| Bridged @ 4Ω | 180 W RMS x 1 |
General Specifications
| Frequency Response | 12 Hz - 22 kHz (+0, -1dB) |
| S/N Ratio, referred to highest rated power | >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W | >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Damping Factor @ 4 Ω | >150 / 50 Hz |
| Damping Factor @ 2 Ω | >75 / 50 Hz |
| THD+N @ Rated Power | <1% @ 2 Ω per Ch. |
| Input Voltage Range @ RCA Inputs | 200 mV - 4 V RMS |
| Min.Copper Power / Ground Wire Gauge | 8 AWG wire |
| Fuse Rating | 20 A (AFS, AGU or MaxiFuse™) |
Signal Processing
| Filter Mode(s) | Low-Pass or High-Pass |
| Filter Slope(s) | 12 dB/octave |
| Filter Frequency Range | 50 Hz - 500 Hz |
| Detented, Calibrated Filter Freq. Potentiometer | Yes |
| Filter Defeat Function | Yes |
| Remote Level Control | Optional HD-RLC or MHD-RLC (water-resistant) |
| Security Cover for Controls | Yes |
| Pass-Through Preamp Output | Buffered |
Physical Specifications
| Height (H) | 2.05 in / 52 mm |
| Width (W) | 6.85 in / 174 mm |
| Depth (D) | 7.09 in / 180 mm |
| Net Weight | 3.75 lb / 1.70 kg |
1x JL Audio XD-ACS30:Amplifier Connection Kit 30 A capacity Single Amplifier - (XD-ACS30)
JL Audio XD-ACS30: Amplifier Connection Kit 30 A capacity Single Amplifier
Core 12V - 30A Connection System for One Amplifier
Everything you need to make secure, high-integrity connections to a single amplifier with up to a 30A fuse rating. Our compact Maxi® Master Fuse Block is easy to install and allows you to accurately fuse your amplifier. A beefy self-tapping ground screw is also included to help you achieve a solid ground. To complete your installation, you will also find an 18 ft. (5.5 m), 2-Channel Audio Interconnect Cable and a generous length of speaker cable in this system.
What's in the kit?
XD-MFB-MAXI Fuse Holder with Genuine 30A Maxi® Fuse
17 ft (5.18 m) Red 30A Core Power Wire, terminated with ring
3 ft (0.91 m) Black 30A Core Ground Wire, terminated with ring
17 ft (5.18 m) Blue Remote Turn-On Lead Wire
25 ft (7.62 m) Blue Speaker Cable
XD-CLRAIC2-18 2-channel, 18 ft. (5.5 m) Audio Interconnect Cable
Self-Tapping Ground Screw
Rubber Firewall Grommet
Nylon Wire Ties
Hex Wrench for Fuse Holder
This kit is appropriate for single amplifiers with fuse ratings from 15A to 30A. Depending on the specific fuse rating of your amplifier, you may need to purchase an appropriate Maxi® fuse separately.