Description
Included in this kit
This bundle includes a JL Audio XD-PCS4-1B:Premium 4 AWG 12 V Power Connection Kit Single Amplifier, a JL Audio XD-CLRAIC2-18:2-Channel 18 ft (5.49 m) Core Audio Interconnect, a JL Audio XDM1000/1 XDM Series Monoblock Class-D Car/Marine Subwoofer Amplifier, 1000 W, and a JL Audio HD-RLC:Amplifier Remote Level Control and Cable.
1x JL Audio XD-PCS4-1B:Premium 4 AWG 12 V Power Connection Kit Single Amplifier - (XD-PCS4-1B)
JL Audio XD-PCS4-1B:Ā Premium 4 AWG 12 V Power Connection Kit Single Amplifier
Premium 4 AWG 12V Power Connection System for One Amplifier
Everything you need to make secure, high-integrity power connections to a single amplifier with up to a 100A fuse rating. Our compact MaxiĀ® Master Fuse Block is easy to install and allows you to accurately fuse your amplifier. A beefy self-tapping ground screw is also included to help you achieve a solid ground. As with all our Premium kits, the power wire is true AWG-spec, pure OFC copper.
What's in the kit?
XD-MFBW-MAXI Fuse Holder with Genuine 80A MaxiĀ® Fuse
19 ft. (5.8 m) Blue 4 AWG Premium Power Wire, terminated with ring
3 ft. (0.9 m) Clear 4 AWG Premium Ground Wire, terminated with ring
20 ft. (6.1 m) Blue Remote Turn-On Lead Wire
Self-Tapping Ground Screw
Rubber Firewall Grommet
Nylon Wire Ties
Hex Wrench for Fuse Holder
Bonus: Additional 1-year warranty on JL Audio amplifier when installed by authorized dealer with this Power Connection System!
This kit is appropriate for single amplifiers with fuse ratings from 40A to 100A. Depending on the specific fuse rating of your amplifier, you may need to purchase an appropriate MaxiĀ® fuse separately.
1x JL Audio XD-CLRAIC2-18:2-Channel 18 ft (5.49 m) Core Audio Interconnect - (XD-CLRAIC2-18)
JL Audio XD-CLRAIC2-18:Ā 2-Channel 18 ft (5.49 m) Core Audio Interconnect
2-channel Core Audio Interconnect Cable - 18 ft (5.49 m)
Twisted-Pair Construction to Reject Noise
Pure OFC Copper Conductors with Polyethylene Dielectrics
Molded Connector Bodies
Machined Brass Connector Elements
1x JL Audio XDM1000/1 XDM Series Monoblock Class-D Car/Marine Subwoofer Amplifier, 1000 W - (XDM1000/1)
JL Audio XDM1000/1 Monoblock Class D Car/Marine Subwoofer Amplifier, 1000 W x 1 @ 2 Ī© / 600 W x 1 @ 4 Ī© - 14.4V
This monoblock subwoofer powerhouse employs JL Audio's high-speed NexDā¢ switching technology to achieve unprecedented efficiency and amazing power output from a very compact chassis. The XDM1000/1 generates up to 1000 W of continuous power into a 2 ohm load (14.4V, 1% THD), making it a great choice to drive higher power subwoofer systems.
Designed for car or boat installations, the XDM1000/1 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.
Intended specifically for subwoofer applications, the XDM1000/1 includes a variable slope low-pass filter with continuously variable cutoff frequency selection from 50-500 Hz and a defeatable infrasonic filter (30 Hz, 24 dB/oct.). With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), the amplifier's level can be adjusted directly from the driver's seat or captainās chair.
Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.
Specifications
Rated Continuous (RMS) Power @ 14.4 V
| @ 4 Ī© | 600 W RMS x 1 |
| @ 3 Ī© | 800 W RMS x 1 |
| @ 2 Ī© | 1000 W RMS x 1 |
| @ 1.5 Ī© | N/A |
Rated Continuous (RMS) Power @ 12.5 V
| @ 4 Ī© | 500 W RMS x 1 |
| @ 3 Ī© | 650 W RMS x 1 |
| @ 2 Ī© | 800 W RMS x 1 |
| @ 1.5 Ī© | N/A |
General Specifications
| Frequency Response | 7 Hz - 500 Hz (+0, -1dB) |
| S/N Ratio, referred to highest rated power | >83 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W | >53 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Damping Factor @ 4 Ī© | >1000 / 50 Hz |
| Damping Factor @ 2 Ī© | >500 / 50 Hz |
| THD+N @ Rated Power | <1% @ 2 Ī© per Ch. |
| Input Voltage Range @ RCA Inputs | 200 mV - 4 V RMS |
| Min.Copper Power / Ground Wire Gauge | 4 AWG wire |
| Fuse Rating | 80 A (AFS, AGU or MaxiFuseā¢) |
Signal Processing
| Filter Mode(s) | Low-Pass only |
| Filter Slope(s) | 12/24 dB/octave |
| Filter Frequency Range | 50 Hz - 500 Hz |
| Detented, Calibrated Filter Freq. Potentiometer | Yes |
| Filter Defeat Function | Yes |
| Infrasonic Filter | 30 Hz, defeatable |
| Bass Boost EQ | No |
| Output Polarity Switch | No |
| Remote Subwoofer Level Control | Optional HD-RLC or MHD-RLC (water-resistant) |
| Remote Bass EQ Boost Control | No |
| Pass-Through Preamp Output | Buffered |
Physical Specifications
| Height (H) | 2.05 in / 52 mm |
| Width (W) | 14.73 in / 374 mm |
| Depth (D) | 7.09 in / 180 mm |
1x JL Audio HD-RLC:Amplifier Remote Level Control and Cable - (HD-RLC)
JL Audio HD-RLC:Ā Amplifier Remote Level Control and Cable
Remote Level Control for Select JL Audio Amplifiers
The HD-RLC remotely controls the Bass Level of the following JL Audio amplifiers:
HD-Series: All models
XD-Series: All models
MHD-Series: All models
M-Series: All models
When the HD-RLC is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.
The HD-RLC kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. (5.5 m) cable.
A satin-finish aluminum knob can be purchased separately.