Description
Included in this kit
This bundle includes a JL Audio XDM700/5 XDM Series 5-Channel Class-D Full Range Car/Marine Amplifier, 700 W, a JL Audio XD-PCS4-1B:Premium 4 AWG 12 V Power Connection Kit Single Amplifier, a JL Audio XD-CLRAIC2-18:2-Channel 18 ft (5.49 m) Core Audio Interconnect, and a JL Audio XD-CLRAIC4-18:4-Channel 18 ft (5.49 m) Core Audio Interconnect.
1x JL Audio XDM700/5 XDM Series 5-Channel Class-D Full Range Car/Marine Amplifier, 700 W - (XDM700/5)
JL Audio XDM700/5 5-Channel Class D Car/Marine System Amplifier, 75 W x 4 @ 4 Ī© + 300 W x 1 @ 2 Ī© - 14.4V
The XDM700/5 is ideal for a complete audiophile-grade, subwoofer + four satellite system, and fits comfortably in just about any vehicle or vessel. With this incredible little amplifier, you can drive two pairs of quality component speaker systems with plenty of clean power (75 W x 4 @ 4 Ī©), while also generating a solid 300 W of power for a subwoofer system. The technology that makes this much power possible in such a small chassis is JL Audio's high-speed NexDā¢ switching amplifier design.
Suitable for car or boat installations, the XDM700/5 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.
The XDM700/5 includes a 12 dB / octave high-pass filter for one main channel pair, a 12 dB octave high-pass or bandpass filter for the other main channel pair, plus a variable slope low-pass filter for its subwoofer channel. All three filters offer continuously variable cutoff frequency selection from 50-500 Hz. This amplifier's filters can also be configured as a true 3-way crossover, with a low-pass filter for the subwoofer channel, a bandpass filter on Ch. 3 & 4, and a high-pass filter on Ch. 1 & 2. An "x10" multiplier switch on the Ch. 1 & 2 high-pass filter allows its cutoff frequency to be adjusted from 50-500 Hz or 500-5000 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you have the ability to adjust the level of all amplifier channels or just the subwoofer channel directly from the driver's seat or helm.
Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.
Specifications
Rated Continuous (RMS) Power @ 14.4 V
| Main Channels @ 4 Ī© | 75 W RMS x 4 |
| Main Channels @ 2 Ī© | 100 W RMS x 4 |
| Main Channels - Bridged @ 4Ī© | 200 W RMS x 2 |
| Subwoofer Channel @ 4 Ī© | 180 W RMS x 1 |
| Subwoofer Channel @ 3 Ī© | 240 W RMS x 1 |
| Subwoofer Channel @ 2 Ī© | 300 W RMS x 1 |
| Subwoofer Channel @ 1.5 Ī© | N/A |
Rated Continuous (RMS) Power @ 12.5 V
| Main Channels @ 4 Ī© | 60 W RMS x 4 |
| Main Channels @ 2 Ī© | 90 W RMS x 4 |
| Main Channels - Bridged @ 4Ī© | 180 W RMS x 2 |
| Subwoofer Channel @ 4 Ī© | 180 W RMS x 1 |
| Subwoofer Channel @ 3 Ī© | 240 W RMS x 1 |
| Subwoofer Channel @ 2 Ī© | 300 W RMS x 1 |
| Subwoofer Channel @ 1.5 Ī© | N/A |
General Specifications
| Frequency Response (Main Channels) | 12 Hz - 22 kHz (+0, -1dB) |
| Frequency Response (Subwoofer Channel) | 10 Hz - 1 kHz (+0, -1dB) |
| S/N Ratio, referred to highest rated power (Main Channels) | >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W | >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Damping Factor @ 4 Ī© | >150 / 50 Hz |
| Damping Factor @ 2 Ī© | >75 / 50 Hz |
| THD+N @ Rated Power (Main Channels) | <1% @ 2 Ī© per Ch. |
| THD+N @ Rated Power (Subwoofer Channels) | <1% @ 2 Ī© per Ch. |
| Input Voltage Range @ RCA Inputs | 200 mV - 4 V RMS |
| Min.Copper Power / Ground Wire Gauge | 4 AWG wire |
| Fuse Rating | 60 A (AFS, AGU or MaxiFuseā¢) |
Signal Processing
| Filter Mode(s): Channels 1 & 2 (front) | High-Pass only |
| Filter Slope(s): Channels 1 & 2 (front) | 12 dB/octave |
| Filter Frequency Range: Channels 1 & 2 (front) | 50 Hz - 5 kHz |
| Filter Mode(s): Channels 3 & 4 (rear) | High-Pass or Bandpass |
| Filter Slope(s): Channels 3 & 4 (rear) | 12 dB/octave |
| Filter Frequency Range: Channels 3 & 4 | 50 Hz - 500 Hz |
| Filter Mode(s): Subwoofer Channel | Low-Pass only |
| Filter Slope(s): Subwoofer Channel | 12/24 dB/octave |
| Filter Frequency Range: Subwoofer Channel | 50 Hz - 500 Hz |
| Detented, Calibrated Filter Freq. Potentiometers | Yes |
| Filter Defeat Function | Yes |
| Infrasonic Filter: Subwoofer Channel | none |
| Remote Level Control | Optional HD-RLC or MHD-RLC (water-resistant) |
| Remote Level Modes | Sub Ch. or All Channels |
| Channel Input Mode Switch | Yes (2/4/6 ch.) |
| Pass-Through Preamp Output | None |
| Source Channel Selection for PreOuts | N/A |
Physical Specifications
| Height (H) | 2.05 in / 52 mm |
| Width (W) | 10.23 in / 260 mm |
| Depth (D) | 7.09 in / 180 mm |
| Net Weight | 6.15 lb / 2.79 kg |
1x JL Audio XD-PCS4-1B:Premium 4 AWG 12 V Power Connection Kit Single Amplifier - (XD-PCS4-1B)
JL Audio XD-PCS4-1B:Ā Premium 4 AWG 12 V Power Connection Kit Single Amplifier
Premium 4 AWG 12V Power Connection System for One Amplifier
Everything you need to make secure, high-integrity power connections to a single amplifier with up to a 100A fuse rating. Our compact MaxiĀ® Master Fuse Block is easy to install and allows you to accurately fuse your amplifier. A beefy self-tapping ground screw is also included to help you achieve a solid ground. As with all our Premium kits, the power wire is true AWG-spec, pure OFC copper.
What's in the kit?
XD-MFBW-MAXI Fuse Holder with Genuine 80A MaxiĀ® Fuse
19 ft. (5.8 m) Blue 4 AWG Premium Power Wire, terminated with ring
3 ft. (0.9 m) Clear 4 AWG Premium Ground Wire, terminated with ring
20 ft. (6.1 m) Blue Remote Turn-On Lead Wire
Self-Tapping Ground Screw
Rubber Firewall Grommet
Nylon Wire Ties
Hex Wrench for Fuse Holder
Bonus: Additional 1-year warranty on JL Audio amplifier when installed by authorized dealer with this Power Connection System!
This kit is appropriate for single amplifiers with fuse ratings from 40A to 100A. Depending on the specific fuse rating of your amplifier, you may need to purchase an appropriate MaxiĀ® fuse separately.
1x JL Audio XD-CLRAIC2-18:2-Channel 18 ft (5.49 m) Core Audio Interconnect - (XD-CLRAIC2-18)
JL Audio XD-CLRAIC2-18:Ā 2-Channel 18 ft (5.49 m) Core Audio Interconnect
2-channel Core Audio Interconnect Cable - 18 ft (5.49 m)
Twisted-Pair Construction to Reject Noise
Pure OFC Copper Conductors with Polyethylene Dielectrics
Molded Connector Bodies
Machined Brass Connector Elements
1x JL Audio XD-CLRAIC4-18:4-Channel 18 ft (5.49 m) Core Audio Interconnect - (XD-CLRAIC4-18)
JL Audio XD-CLRAIC4-18:Ā 4-Channel 18 ft (5.49 m) Core Audio Interconnect
4-channel Core Audio Interconnect Cable - 18 ft (5.49 m)
Twisted-Pair Construction to Reject Noise
Pure OFC Copper Conductors with Polyethylene Dielectrics
Molded Connector Bodies
Machined Brass Connector Elements