Description
Included in this kit
This bundle includes a JL Audio 12W3v3-2:12-inch (300 mm) Subwoofer Driver 2 Ohm, and a JL Audio JD500/1 Monoblock Class D Subwoofer Amplifier 500 W.
1x JL Audio 12W3v3-2:12-inch (300 mm) Subwoofer Driver 2 Ohm - (12W3v3-2)
JL Audio 12W3v3-2: 12-inch (300 mm) Subwoofer Driver 2 Ω
W3v3 12-inch Subwoofer Driver (500 W, 2 Ω)
This powerhouse 12-inch driver delivers potent performance and world-class sound quality in medium power applications. Several exclusive JL Audio technologies and proprietary assembly techniques are applied to the 12W3v3 to enhance linearity and reliability.
The 12W3v3-2 is best used with amplifier power in the 150W - 500W range and is optimized to operate in a compact 1.25 cu. ft. (35.4 l) sealed enclosure, or a 1.75 cu. ft. (49.6 l) ported enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab.
1x JL Audio JD500/1 Monoblock Class D Subwoofer Amplifier 500 W - (JD500/1)
JL Audio JD500/1: Monoblock Class D Subwoofer Amplifier 500 W
JD Amplifiers redefine a high-value package in terms of performance and efficiency. JL Audio’s NexD™ switching technology and clipping indicators (for ease in setting Input Sensitivity), add tremendous bang for your buck. Their dual-range, differential-balanced inputs minimize noise, while maximizing compatibility with a wide range of signal levels. Monoblock models also include variable bass boost and Remote Level Control capability when used with an optional RBC-1 Remote Bass Control.
Rated Continuous (RMS) Power @ 14.4 V
• @ 4 Ω: 250 W RMS x 1
• @ 3 Ω: 350 W RMS x 1
• @ 2 Ω: 500 W RMS x 1
General Specifications
• JD500/1: 11.40 x 7.50 x 2.10 in. (290 x 190 x 53 mm)
• Frequency Response: 10 Hz - 150 Hz (+0, -1dB)
• S/N Ratio, referred to highest rated power: >97 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
• S/N Ratio, referred to 1 W: >76 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
• Damping Factor @ 4 Ω: >1000 / 50 Hz
• Damping Factor @ 2 Ω: >500 / 50 Hz
• THD+N @ Rated Power: Less Than 1% @ 2 Ω per Ch.
• Input Voltage Range @ RCA Inputs: 200 mV - 4 V RMS
• Input Voltage Range @ High-Level Inputs: 2 V - 10 V RMS
• Min.Copper Power / Ground Wire Gauge: 8 AWG wire
• Fuse Rating: 30 A (AFS, AGU or MaxiFuse™)
Signal Processing
• Filter Mode(s): Low-Pass only
• Filter Slope(s): 12 dB/octave
• Filter Frequency Range: 50 Hz - 200 Hz
• Detented, Calibrated Filter Freq. Potentiometer: No
• Filter Defeat Function: No
• Infrasonic Filter: none
• Bass Boost EQ: 0 to +12 dB @ 45 Hz
• Output Polarity Switch: No
• Remote Subwoofer Level Control: Optional (RBC-1)
• Remote Bass EQ Boost Control: No
• Pass-Through Preamp Output: Buffered