Description
Included in this kit
This bundle includes a JL Audio 13W3v3-4:13.5-inch (345 mm) Subwoofer Driver 4 Ohm, and a JL Audio JD1000/1 Monoblock Class-D Subwoofer Amplifier, 1000 W.
1x JL Audio 13W3v3-4:13.5-inch (345 mm) Subwoofer Driver 4 Ohm - (13W3v3-4)
JL Audio 13W3v3-4: 13.5-inch (345 mm) Subwoofer Driver 4 Ω
W3v3 13.5-inch Subwoofer Driver (600 W, 4 Ω)
If you have the space, it makes a tremendous sense to maximize your subwoofer system's piston area to enhance efficiency (and output). It gets even better when the larger driver delivers additional power handling and excursion. For the preceding reasons, the 13W3v3 can be the best choice for those seeking high output with great sound quality at medium power levels.
As with the smaller W3v3's, several exclusive JL Audio technologies and proprietary assembly techniques are applied to the 13W3v3 to enhance linearity and reliability.
The 13W3v3-4 is best used with amplifier power in the 150W - 600W range and is optimized to operate in a moderate size 1.5 cu. ft. (42.5 l) sealed enclosure, or a 2.25 cu. ft. (63.7 l) ported enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab.
1x JL Audio JD1000/1 Monoblock Class-D Subwoofer Amplifier, 1000 W - (JD1000/1)
JL Audio JD1000/1: Monoblock Class D Subwoofer Amplifier 1000 W
JD Amplifiers redefine a high-value package in terms of performance and efficiency. JL Audio’s NexD™ switching technology and clipping indicators (for ease in setting Input Sensitivity), add tremendous bang for your buck. Their dual-range, differential-balanced inputs minimize noise, while maximizing compatibility with a wide range of signal levels. Monoblock models also include variable bass boost and Remote Level Control capability when used with an optional RBC-1 Remote Bass Control.
Rated Continuous (RMS) Power @ 14.4 V
• @ 4 Ω: 600 W RMS x 1
• @ 3 Ω: 800 W RMS x 1
• @ 2 Ω: 1000 W RMS x 1
General Specifications
• JD1000/1: 11.40 x 7.50 x 2.10 in. (290 x 190 x 53 mm)
• Frequency Response: 20 Hz - 150 Hz (+0, -1dB)
• S/N Ratio, referred to highest rated power: >75 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
• S/N Ratio, referred to 1 W: >45 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
• Damping Factor @ 4 Ω: >1000 / 50 Hz
• Damping Factor @ 2 Ω: >500 / 50 Hz
• THD+N @ Rated Power: Less Than 1% @ 2 Ω per Ch.
• Input Voltage Range @ High-Level Inputs: 2 V - 10 V RMS
• Input Voltage Range @ RCA Inputs: 200 mV - 4 V RMS
• Min.Copper Power / Ground Wire Gauge: 4 AWG wire
• Fuse Rating: 80 A (AFS, AGU or MaxiFuse™)
Signal Processing
• Filter Mode(s): Low-Pass only
• Filter Slope(s): 12 dB/octave
• Filter Frequency Range: 50 Hz - 200 Hz
• Detented, Calibrated Filter Freq. Potentiometer: No
• Filter Defeat Function: No
• Infrasonic Filter: none
• Bass Boost EQ: 0 to +12 dB @ 45 Hz
• Output Polarity Switch: No
• Remote Subwoofer Level Control: Optional (RBC-1)
• Remote Bass EQ Boost Control: No
• Pass-Through Preamp Output: Buffered