Description
Included in this kit
This bundle includes a JL Audio VX600/6i 6-channel Class D Amplifier with integrated DSP, 100 Watts x 6 @ 2 ohm / 75W x 6 @ 4 ohm - 14.4V, and a JL AudioĀ® C6 Car System 6.5" Two-way Component System (C6-650).
1x JL Audio VX600/6i 6-channel Class D Amplifier with integrated DSP, 100 Watts x 6 @ 2 ohm / 75W x 6 @ 4 ohm - 14.4V - (VX600/6i)
6-Channel Class D Full-Range Amplifier with Integrated DSP, 100 W x 6 @ 2 Ī© / 75 W x 6 @ 4 Ī© - 14.4V
Designed to simplify great audio, every VXi amplifier combines our advanced NexD2ā¢ switching amplifier technology with an integrated, full-featured digital signal processor.
With our second-generation NexD2ā¢ technology, the VX600/6i full-range amplifier outputs up to 75 watts per channel into 4 ohms, or 100 watts into 2 ohms. It can also be bridged into 4 ohms, producing up a rock-solid 200 W x 3.
The NexD2ā¢ full-range technology in this amplifier is DSP-controlled and features a reduced loop area design utilizing DirectFETā¢ outputs for outstanding fidelity, very low noise and exceptional efficiency. The amplifier chassis is ultra-compact, with all connections on one side, to greatly simplify installation into tight spaces.
Instead of traditional control knobs and switches, all amplifier adjustments and DSP functionality are configured via a compatible external device (PC, Tablet or Smartphone), with the appropriate JL Audio TĆ¼Nā¢ Software application installed.
Amplifier includes: Power Connector (for 4 AWG wire), Analog Input/Pre-Out Harness, Speaker Output Harness, 6 ft A/B USB Cable
Features
TĆ¼NTM Software Applications
Intuitive setup and tuning, all at your fingertips. Automatically recognizes connected amplifier and displays appropriate interface. TĆ¼Nā¢ is available for download for free in a variety of applications, for computers and most handheld devices.
Unprecedented, Onboard DSP Tuning Power
- Premium, triple-core AKMĀ® DSP with an optimized configuration, developed in collaboration with AKMĀ®
- Hi-Res audio processing at 24 bit/96 kHz
- High-performance AKMĀ® A/D and D/A converters
- 10 Bands of fully parametric EQ, per output channel, including pre-outs
- Shelving EQ option for Band 1 and Band 10
- High-Pass & Low-Pass Filters for each output channel, with selectable alignments and slopes:
Linkwitz-Riley: 12, 24, 48 dB/octave
Butterworth: 6, 12, 18, 24, 36, 48 dB/octave - Signal Delay in 0.01 millisecond steps (equivalent to 1/8-inch, 3 mm)
- All-Pass Filter (Phase EQ), with variable "Q" and corner frequency
- Polarity Reversal (0 or 180 deg.)
- Output Level Trim in 0.1 dB steps
NexD2TM Switching Amplifier Technology
- Our latest generation of high-speed switching technology delivers superb low frequency power and efficiency.
- Specially optimized for subwoofer applications
Ultra-Versatile Analog and Digital Inputs
- High-performance, differential-balanced analog inputs for outstanding noise rejection
- Accepts speaker level signals from 200 mV, up to 16V RMS, including those from many factory systems
- Optical Digital (Toslink) input permits direct connection of S/PDIF digital sources, bypassing A/D converter. Accepts up to 24 bit/192 kHz input.
- Independently configurable RCA analog and digital pre-outs (24 bit/96 kHz)
- Automatic turn-on options via Signal-Sensing or DC-Offset sensing
Functional Compact Chassis Design
- Solid cast alloy main unibody and bottom plate deliver superb EMI performance and shielding
- All connections utilize compact mating connectors for maximum integrity and fitment into tight spaces.
- Configurable LED logo ring displays status and can display audio preset color code or user-defined color
- Logo badge can be oriented in 90 degree increments
- Corner caps engineered to conceal mounting holes and hardware
JLidTM System Command and Control with Networking Capabilities
JL Audio's digital protocol provides control interface and communication between VXi amplifiers and optional JLidTM accessories, including:
- DRC-100/DRC-200/DRC-205 Digital Remote Controllers: Offers convenient level and DSP preset control from the driver's seat.
- VXi-BTC BluetoothĀ® Communicator: Permits wireless configuration of VXi amplifiers using your compatible AppleĀ® or AndroidĀ® device.
- VXi-HUB Optical Network Hub: Provides network connectivity for up to five slave VXi amplifiers, allowing synchronization of DRC controllers and DSP presets. Up to two VXi-HUBs can be daisy-chained to network up to ten VXi amplifiers.
Apple is a trademark of Apple Inc., registered in the U.S. and other countries.
App Store is a service mark of Apple Inc., registered in the U.S. and other countries.
Google Play is a trademark of Google LLC.
Android is a trademark of Google LLC.
Rated Continuous (RMS) Power @ 14.4 V
| @ 4 Ī© | 75 W RMS x 6 |
| @ 2 Ī© | 100 W RMS x 6 |
| Bridged @ 4Ī© | 200 W RMS x 3 |
Rated Continuous (RMS) Power @ 12.5 V
| @ 4 Ī© | 60 W RMS x 6 |
| @ 2 Ī© | 90 W RMS x 6 |
| Bridged @ 4Ī© | 180 W RMS x 3 |
General Specifications
| Frequency Response | 12 Hz - 24 kHz (+0, -1dB) |
| S/N Ratio, referred to highest rated power (Analog Inputs) | 99 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W (Analog Inputs) | 80 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to highest rated power (Digital Inputs) | 99 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W (Digital Inputs) | 80 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Damping Factor @ 4 Ī© | >100 / 50 Hz |
| Damping Factor @ 2 Ī© | >50 / 50 Hz |
| THD+N @ Rated Power | <1% @ 2 Ī© per Ch. |
| Input Voltage Range @ RCA Inputs | 200 mV - 16 V RMS |
| Min.Copper Power / Ground Wire Gauge | 4 AWG wire |
| Fuse Rating | 50 A (AFS, AGU or MaxiFuseā¢) |
Physical Specifications
| Height (H) | 2.12 in / 54 mm |
| Width (W) | 9.81 in / 250 mm |
| Depth (D) | 6.62 in / 168 mm |
| Net Weight | 5.55 lb / 2.5 kg |
1x JL AudioĀ® C6 Car System 6.5" Two-way Component System (C6-650) - (C6-653)
General
Size: 6.5"
RMS power handling: 100 W
Sensitivity (SPL @ 1 W/1 m): 2.75": 83.50 dB, 6.5": 87.37 dB
Sensitivity (SPL @ 1 W/0.5 m): 1": 96 dB
Sensitivity (SPL @ 2.83 V/1 m): 2.75": 86.50 dB, 6.5": 90.33 dB
Frequency response (+/- 3 dB): 53 Hz-21 KHz
Nominal impedance: 4 Ī©
Recommended amplifier power (RMS): 25-150 W/Channel
Voice coil diameter: 2.75": 0.8" (20.5 mm), 6.5": 1.27" (32 mm)
Cone material: Vacuum-formed, mineral-filled polypropylene
Tweeter type: Silk Dome
Tweeter size: 1" (25 mm)
Grille(s) included
Connections
Speaker connections Spade connectors
Mounting Dimensions
Frame outer diameter: 2.75": 2.52" (77 mm), 6.5": 6.5" (165 mm)
Mounting depth clearance: 2.75": 1.42" (36 mm), 6.5": 2.60" (66 mm)
Frontal grille protrusion: 2.75": 0.47" (12 mm), 6.5": 1" (25 mm)
Mounting hole: 2.75": 2.52" (64 mm), 6.5": 5.46" (139 mm)
Grille tray outer diameter: 2.75": 3.58" (91 mm), 6.5": 6.76" (172 mm)
Bolt hole circle: 2.75": 3.03" (77 mm), 6.5": 6.12" (156 mm)
Motor outer diameter: 2.75": 2.75" (69 mm), 6.5": 3.54" (90 mm)
Parameters
Free Air Resonance (FS): 1": 1500 Hz, 2.75": 185 Hz, 6.5": 52.8Hz
Electrical āQā (Qes): 2.75": 0.769, 6.5": 0.647
Mechanical āQā (Qms): 2.75": 7.848, 6.5": 5.076
Total āQā (Qts): 2.75": 0.700, 6.5": 0.574
Equivalent Compliance (Vas): 2.75": 0.0353 cu ft (0.125 L), 6.5": 0.532 cu ft (15.069 L)
One-way linear excursion (Xmax; specs are derived via one-way voice coil overhang method with no correction factors applied): 2.75": 0.059" (1.50 mm), 6.5": 0.148" (3.75 mm)
Reference Efficiency (NO): 2.75": 0.1414%, 6.5": 0.344%
Moving mass (Mms): 2.75": 4.65 g, 6.5": 16.42 g
Mechanical compliance (Cms): 2.75": 0.00031 m/N, 6.5": 0.000581 m/N
Magnetic strength (BL): 2.75": 5.03 N/A, 6.5": 5.186 N/A
Effective piston area (SD): 2.75": 3.66 inĀ² (0.00236 mĀ²), 6.5": 21.4 inĀ² (0.013807 mĀ²)
DC resistance (RE): 1"/6.5": 3.20 Ī©, 2.75": 3.58 Ī©