Description
Included in this kit
This bundle includes a Stinger STXJLPOD Wrangler JL and Gladiator JT Front 6.5” Speaker Pods with Tweeter Adapter, and a JL Audio C1-650x 6.5-inch (165mm) Coaxial with 0.75-inch (19mm) aluminum dome tweeter.
1x Stinger STXJLPOD Wrangler JL and Gladiator JT Front 6.5” Speaker Pods with Tweeter Adapter - (STXJLPOD)
Built tough and made specifically for Wrangler JL and Gladiator JT, this front speaker pod kit makes it easy to install 6.5” Phoenix Gold or other speakers in your Jeep. This complete package includes pods for mounting 6.5” coaxial or component speakers in the dash of your Wrangler or Gladiator. Includes speaker harnesses that plug into the Jeep connectors and provide a universal connection for new speakers, along with tweeter adapters allowing easy installation of a tweeter in the factory location.
Features:
• Fits 2018-2022 Wrangler JL & 2020-2022 Gladiator JT
• Fits most aftermarket 6.5” coaxial or component speakers
• Built from sturdy ASA plastic to resist impact, chemicals, UV light, and extreme temperatures
• Unique 2-piece construction provides durability and reliability ensuring you can play your music for all on-road or off-road adventures
• Includes a pair of mounting plates for easy installation of aftermarket tweeters in the factory dash location
• Includes plug-and-play speaker harnesses to simplify your install
Perfect Fit
Engineered to fit Jeep Wrangler JL and Gladiator JT.
Better Performance
Add aftermarket speakers to upgrade your sound system.
Designed for Jeep
Designed to withstand harsh outside elements including water, dirt, dust and debris.
1x JL Audio C1-650x 6.5-inch (165mm) Coaxial with 0.75-inch (19mm) aluminum dome tweeter - (C1-650x)
JL Audio C1-650x
Coaxial Speaker System: 6.5-inch (165 mm) Woofer, 0.75-inch (19 mm) Aluminum Dome Tweeter
C1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles. To facilitate fit, multi-application adaptor rings are included with the C1-650x allowing easy, drop-in installation in vehicles equipped with oversized 6.5-inch and 6.75-inch speaker openings. Without the ring, the speaker will fit into many "6-inch" speaker locations as well.
C1 woofer drivers benefit from proprietary FEA modeling and JL Audio's expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly, while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-650x is a proprietary, stamped, steel 6.50-inch (165 mm) frame and a DMA-optimized motor system. A mineral-filled, injection-molded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control the voice coil's motion. Tinsel leads are carefully routed and attached to the spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers.
Equipped with a true, edge-driven, aluminum dome tweeter, C1 speakers stand further apart from others in its category with superior high-frequency clarity and definition. The tweeter’s design has inherently excellent off-axis response and high-frequency extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit. A true, 2nd order high-pass filter is employed to further enhance smoothness and improve power handling.
Sold as a pair. Grilles not included.
General Specifications
| Continuous Power Handling (RMS) | 50 W |
| Peak Music Power | 225 W |
| Recommended Amplifier Power (RMS) | 10 - 75 W / Ch. |
| System Efficiency | 90.5 dB @ 1 W / 1 m |
| System Nominal Impedance | 4 Ω |
| System Frequency Response | 48 Hz - 24 KHz ± 3 dB |
Physical Specifications
| Frame Outer Diameter* (A) | 6.25 in / 159 mm |
| Grille Tray Outer Diameter (B) | N/A |
| Motor Outer Diameter (C) | 3.15 in / 80 mm |
| Frontal Coaxial Tweeter Protrusion** (D) | 0.72 in / 18 mm |
| Frontal Grille Protrusion (E) | N/A |
| Mounting Hole Diameter (F) | 5.02 in / 128 mm |
| Mounting Depth (G) | 2.07 in / 53 mm |