Description
Included in this kit
This bundle includes a Stinger STXJLSBA 2018- 2022 Wrangler - Gladiator JL / JT Rear Universal Speaker Adaptors with Grilles 6.5 or 6X9, and a JL Audio C1-690x 6 x 9-inch (150 x 230mm) Coaxial Speakers with 0.75-inch (19mm) aluminum dome tweeters.
1x Stinger STXJLSBA 2018- 2022 Wrangler - Gladiator JL / JT Rear Universal Speaker Adaptors with Grilles 6.5 or 6X9 - (STXJLSBA)
Built tough and made specifically for Wrangler and Gladiator, this kit includes all the hardware needed to upgrade your soundbar to fit better quality aftermarket speakers. This complete package includes adapter plates for mounting a pair of 6X9” speakers or a set of 6.5” coaxial or component speakers. The included speaker harnesses plug into the connectors and provide a universal connection for new speakers. The speaker grills feature a factory-style pattern and texture and conceal the speakers for an OEM appearance.
Designed for Wrangler/Gladiator:
Designed to withstand harsh outside elements including water, dirt, dust and debris.
Better Performance:
Upgraded speakers can handle more power, and produce better sound. Upgrade your sound system with the speakers you choose!
Perfect Fit:
Engineered to fit the original soundbar and blend into the original appearance.
** some factory modifications required
Features:
Fits 2018-2022 Wrangler Soundbar
Fits 2020-2022 Gladiator Soundbar
Factory Style Texture and Grill Pattern
Fits Most Aftermarket Speakers
6X9” Coaxial
6.5” Coaxial
6.5” Component
Built From Sturdy ASA to Resist Impact, Chemicals, UV light, and Weather
Includes Cutting Templates And Adapter Plates For Installation And Mounting
Includes Speaker Wire Harness Adapters
Includes All Necessary Hardware
Two Piece Design For Painting And Other Customization
1x JL Audio C1-690x 6 x 9-inch (150 x 230mm) Coaxial Speakers with 0.75-inch (19mm) aluminum dome tweeters - (C1-690x)
JL Audio C1-690x
Coaxial Speaker System: 6 x 9-inch (150 x 230 mm) Woofer, 1.0-inch (25 mm) Aluminum Dome Tweeter
C1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles. To facilitate fit, spacer/adaptor rings are included allowing the C1-690x to be installed in bottom-mount applications.
C1 woofer drivers benefit from proprietary FEA modeling and JL Audio's expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly, while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-690x is a proprietary, stamped, steel 6 x 9-inch (150 x 230 mm) oval frame and a DMA-optimized motor system. A mineral-filled, injection-molded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control motion and prevent impact between the voice coil and the back plate. Tinsel leads are carefully routed and attached to the spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers.
Equipped with a true, edge-driven, aluminum dome tweeter, C1 speakers stand further apart from others in its category with superior high-frequency clarity and definition. The tweeter’s design has inherently excellent off-axis response and high-frequency extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit. A true, 2nd order high-pass filter is employed to further enhance smoothness and improve power handling.
Sold as a pair. Grilles not included.
General Specifications
| Continuous Power Handling (RMS) | 60 W |
| Peak Music Power | 225 W |
| Recommended Amplifier Power (RMS) | 10 - 100 W / Ch. |
| System Efficiency | 91.5 dB @ 1 W / 1 m |
| System Nominal Impedance | 4 Ω |
| System Frequency Response | 39 Hz - 22 KHz ± 3 dB |
Physical Specifications
| Frame Outer Diameter* (A) | 6.38 x 9.33 in / 162 x 237 mm |
| Grille Tray Outer Diameter (B) | N/A |
| Motor Outer Diameter (C) | 3.54 in / 90 mm |
| Frontal Coaxial Tweeter Protrusion** (D) | 0.41 in / 10 mm |
| Frontal Grille Protrusion (E) | N/A |
| Mounting Hole Diameter (F) | N/A |
| Mounting Depth (G) | 2.75 in / 70 mm |