Description
Included in this kit
This bundle includes a Memphis Audio POLRCA RCA output for Polaris Standard Head Unit, a JL Audio MX280/4 4 Channel 280 watt, Marine/Power Sports grade amplifier, and a JL Audio StealthboxĀ® for 2014-Up Polaris RZR, MX650 6.5" Coaxial Speaker Pods.
1x Memphis Audio POLRCA RCA output for Polaris Standard Head Unit - (POLRCA)
POLRCA features a connection plug that is compatible with Polaris OEM headunits establishing a pair of RCA outputs allowing you to connect additional audio equipment to your factory system without changing the head unit.
1x JL Audio MX280/4 4 Channel 280 watt, Marine/Power Sports grade amplifier - (MX280/4)
JL Audio MX280/4
Engineered specifically for powersports applications, the 4-channel MX280/4 amplifier employs our high-speed NexDā¢ switching design to deliver plenty of clean power, without straining charging systems. Its tiny, cast aluminum chassis is highly resistant to corrosion, with an IPX6 water-resistance rating, making it perfect for motorcycles, ATVās or other utility vehicles.
Generating a solid 50W x 4 into 4 ohms (14.4V, 1% THD), the MX280/4 is fully bridgeable, so it can be used as a 3-channel amplifier, or as a 2-channel amplifier producing a potent 140W x 2 into 4 ohms.
Other features include independent front and rear crossovers with selectable full-range, high-pass or low-pass filter controls and a dual-range input section that accepts a wide range of input voltage levels, from line-level all the way to high-power speaker level signals.
Rated Continuous (RMS) Power @ 14.4 V
| @ 4 Ī© | 50 W RMS x 4 |
| @ 2 Ī© | 70 W RMS x 4 |
| Bridged @ 4Ī© | 140 W RMS x 2 |
Rated Continuous (RMS) Power @ 12.5 V
| @ 4 Ī© | 36 W RMS x 4 |
| @ 2 Ī© | 52 W RMS x 4 |
| Bridged @ 4Ī© | 100 W RMS x 2 |
General Specifications
| Frequency Response | 20 Hz - 20 kHz (+0, -1dB) |
| S/N Ratio, referred to highest rated power | >89.5 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W | >68 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Damping Factor @ 4 Ī© | >60 / 50 Hz |
| Damping Factor @ 2 Ī© | >30 / 50 Hz |
| THD+N @ Rated Power | <1% @ 2 Ī© per Ch. |
| Input Voltage Range @ RCA Inputs | Switchable from 250 mV - 4 V RMS (Low) to 750 mV - 15 V RMS (High) |
| Min.Copper Power / Ground Wire Gauge | 8 AWG wire |
| Fuse Rating | 35 A (AFS, AGU or MaxiFuseā¢) |
Signal Processing
| Filter Mode(s) | Low-Pass or High-Pass |
| Filter Slope(s) | 12 dB/octave |
| Filter Frequency Range | 35 Hz - 300 Hz |
| Detented, Calibrated Filter Freq. Potentiometers | Yes |
| Filter Defeat Function | Yes |
| Remote Level Control | No |
| Remote Level Modes | N/A |
| Channel Input Mode Switch | Yes (2/3/4 ch.) |
| Pass-Through Preamp Output | None |
| Source Channel Selection for PreOuts | N/A |
Physical Specifications
| Height (H) | 1.77 in / 45 mm |
| Width (W) | 8.66 in / 220 mm |
| Depth (D) | 3.09 in / 78.5 mm |
| Net Weight | 3.18 lb / 1.44 kg |
1x JL Audio StealthboxĀ® for 2014-Up Polaris RZR, MX650 6.5" Coaxial Speaker Pods - (SB-POL-RZG2SPKR/MX650)
SB-POL-RZG2SPKR/MX650
Fits 2014+ RZR 900 XC, RZR 4 900, RZR XP 1000 & RZR XP 4 1000The Polaris RZR is built to dominatevirtually every type of off-road terrain without breaking a sweat. Sadly, its factory audio options were not designed to overcome the challenges of an extreme open-air cockpit.
Specifically designed for Polaris RZR vehicles, these custom-engineered speaker pods feature 100% fiberglass construction with a texture-coated, weatherproof finish and mount securely in each kick-panel, off the floor and out of harmās way. Each sealed enclosure houses a high-performance, MX-Series 6.5-inch marine coaxial speaker and delivers clean, powerful sound.
Best used in conjunction with one, or both, of our StealthboxĀ® subwoofer systems for Polaris RZR vehicles.
The Hard Data: Contains one pair of MX650-CCX-SGTLD-B marine coaxial speakers with blue LED illumination, each in a sealed, fiberglass enclosure. 60 watt power handling (per channel). 4 ohms per channel. Installs in kick-panels.