Description
Included in this kit
This bundle includes a JL Audio RBC-1:Remote Bass Control, a JL Audio RD1500/1 Monoblock Class D Full-Range Amplifier, 750 Watts x 1 @ 4 ohm / 1500 Watts x 1 @ 2 or 1 ohm - 14.4V, a JL Audio XD-PCS1/0-2B: Premium 1/0 AWG 12 V Power Connection Kit, Two Amplifiers, and a JL Audio XE-BLKAIC2-18 2-Channel Twisted-Pair RCA Audio Interconnect w/ Machined Connectors - 18 ft. / 5.49 m.
1x JL Audio RBC-1:Remote Bass Control - (RBC-1)
JL Audio RBC-1:Ā Remote Bass Control
Remote Bass Control for Select JL Audio Amplifiers
The RBC-1 remotely controls the Bass Level of the following JL Audio amplifiers:
JX-Series: JX250/1, JX500/1, JX1000/1D
When the RBC-1 is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.
The RBC-1 remotely controls the Bass EQ boost feature of the following JL Audio amplifiers:
Slash v2 Series: 250/1v2, 500/1v2, 1000/1v2, 450/4v2
Original Slash Series: 500/1, 1000/1, 450/4, 500/5
G-Series: All Models
A-Series: All Models
e-Series: All Models (including marine versions)
M-Series: M1400, M1700, M2150, M2250, M4300, M4500, M6450, M6600
When the RBC-1 is connected to the above amplifiers, the on-board "Boost" control of the amplifier is defeated and the RBC-1 becomes the active controller.
The RBC-1 kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. (5.5 m) cable.
A satin-finish aluminum knob can be purchased separately.
1x JL Audio RD1500/1 Monoblock Class D Full-Range Amplifier, 750 Watts x 1 @ 4 ohm / 1500 Watts x 1 @ 2 or 1 ohm - 14.4V - (RD1500/1)
Monoblock Class D Subwoofer Amplifier, 1500 W x 1 @ 2 Ī© AND 1 Ī© / 750 W x 1 @ 4 Ī© - 14.4V
Purpose-built for subwoofer applications, the RD1500/1 monoblock amplifier delivers 1500 watts of jaw-dropping bass output into 1 OR 2 ohms (14.4V, 1% THD). At the heart of this ultra-sleek and compact power plant is JL Audioās exclusive NexDā¢ Class D technology, permitting high power output with exceptional efficiency and low distortion.
For your convenience, all of the RD1500/1ās controls are located on top of the amplifier, beneath a protective cover, with all connections found along one side of its chassis. Signal processing features include a 12 dB / octave low-pass filter, with continuously variable frequency selection from 50-500 Hz, and a variable bass boost EQ. Dual-range, differential-balance inputs are also onboard, capable of accepting most input voltage levels. Automatic turn-on capability (via signal sensing or DC-offset sensing) is standard, along with a set of preamp outputs so you can easily pass signals to another amplifier.
The RD1500/1 is also equipped with an onboard LED-clipping indicator. This all-new, innovative feature lets you easily set your amplifierās input sensitivity setting, quickly and accurately, with no special equipment needed. The RD1500/1 features a durable, black powder-coated finish and a top-mounted, dual-color LED light strip that reports the overall status and condition. Control of the subwoofer level from the driverās seat is easily accomplished with the addition of the optional RBC-1 remote level control (sold separately).
Rated Continuous (RMS) Power @ 14.4 V
| @ 4 Ī© | 750 W RMS x 1 |
| @ 3 Ī© | 1000 W RMS x 1 |
| @ 2 Ī© | 1500 W RMS x 1 |
| @ 1 Ī© | 1500 W RMS x 1 |
Rated Continuous (RMS) Power @ 12.5 V
| @ 4 Ī© | 750 W RMS x 1 |
| @ 3 Ī© | 1000 W RMS x 1 |
| @ 2 Ī© | 1200 W RMS x 1 |
| @ 1 Ī© | 1500 W RMS x 1 |
General Specifications
| Frequency Response | 7 Hz - 500 Hz (+0, -1dB) |
| S/N Ratio, referred to highest rated power | >82 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W | >50 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Damping Factor @ 4 Ī© | >1100 / 50 Hz |
| Damping Factor @ 2 Ī© | >550 / 50 Hz |
| THD+N @ Rated Power | <1% @ 2 Ī© per Ch. |
| Input Voltage Range @ RCA Inputs | 200 mV - 8 V RMS |
| Min.Copper Power / Ground Wire Gauge | 2 AWG wire |
| Fuse Rating | 150 A (AFS, AGU or MaxiFuseā¢) |
Signal Processing
| Filter Mode(s) | Low-Pass only |
| Filter Slope(s) | 12 dB/octave |
| Filter Frequency Range | 50 Hz - 500 Hz |
| Detented, Calibrated Filter Freq. Potentiometer | No |
| Filter Defeat Function | No |
| Infrasonic Filter | 30 Hz, defeatable |
| Bass Boost EQ | Yes |
| Output Polarity Switch | No |
| Remote Subwoofer Level Control | Optional (RBC-1) |
| Remote Bass EQ Boost Control | No |
| Pass-Through Preamp Output | Buffered |
Physical Specifications
| Height (H) | 2.13 in / 54 mm |
| Width (W) | 18.05 in / 458 mm |
| Depth (D) | 6.96 in / 177 mm |
1x JL Audio XD-PCS1/0-2B: Premium 1/0 AWG 12 V Power Connection Kit, Two Amplifiers - (XD-PCS1/0-2B)
XD-PCS1/0-2B
Premium 1/0 AWG 12V Power Connection System for Two Amplifiers
Everything* you need to make secure, high-integrity power connections to two amplifiers with combined fuse ratings up to 200A. This kit features our high-capacity ANL Master Fuse Block, a MaxiĀ®-fused distribution block and our bolt-on master ground lug, for maximum performance.
What's in the kit?
XD-MFBU-ANL Fuse Holder with 200A ANL Blade Fuse
XD-FDBU-2 Fused Distribution Block*
20 ft. (6.1 m) Blue 1/0 AWG Premium Power Wire, terminated with ring
8 ft. (2.4 m) Blue 4 AWG Premium Power Wire
8 ft. (2.4 m) Clear 4 AWG Premium Ground Wire, terminated with a ring on each end
20 ft. (6.1 m) Blue Remote Turn-On Lead Wire
Bolt-On Master Ground Lug
Rubber Firewall Grommet
Nylon Wire Ties
Hex Wrench for Fuse Holder
Bonus: Additional 1-year warranty on JL Audio amplifier when installed by authorized dealer with this Power Connection System!
The supplied 200A ANL blade fuse installs into the Master Fuse Block near the battery. It is appropriate to protect the main power wire in the event of a short circuit. *You will also need to purchase the appropriate MaxiĀ® fuses for installation into the Fused Distribution Block. These need to be selected based on the specific fuse rating of the amplifiers you are installing and, for that reason, are not included with this kit.
1x JL Audio XE-BLKAIC2-18 2-Channel Twisted-Pair RCA Audio Interconnect w/ Machined Connectors - 18 ft. / 5.49 m - (XE-BLKAIC2-18)
JL Audio XE-BLKAIC2-18 2-Channel Twisted-Pair Audio Interconnect w/ Machined Connectors - 18 ft. / 5.49 m
ECS premium audio interconnect cables begin with small diameter silver-plated OFC copper conductors with TeflonĀ® dielectrics constructed in a tight twisted-pair arrangement for optimum noise rejection. An overmolded strain-relief secures the silver-soldered connections inside the machined brass connector ends and splitters for maximum durability.The RCA plug barrels are short by design to facilitate installation in tight spaces while an extremely supple cable, protected by braided black outer jacket, provides a sleek look in any installation.
ā¢ Twisted-Pair Construction to Reject Noise
ā¢ Silver-Plated, pure OFC Copper Conductors with TeflonĀ® Dielectrics
ā¢ Silver-Soldered Connections with overmolded strain-relief
ā¢ Machined Brass Connector Bodies and Cable-Splitter with Marine-rated corrosion-resistant plating
ā¢ Braided black outer jacket for protection from abrasion
ā¢ Compact connector design for installation in tight spaces