Description
Included in this kit
This bundle includes a JL Audio M200/2:2 Ch. Class D Full-Range Marine Amplifier 200 W, and a JL Audio M3-10IB-C-Gw-4 - M3 10" 4-Ohm Infinite Baffle Marine Subwoofer - Gloss White Classic Grille.
1x JL Audio M200/2:2 Ch. Class D Full-Range Marine Amplifier 200 W - (M200/2)
JL Audio M200/2
This tiny amplifier packs a serious full-range punch, delivering a staggering 100 watts per channel into 2 Ω (14.4V, 1% THD). The breakthrough that makes this much power possible in such a small chassis is our NexD™ ultra-high-speed switching design, which allows for full bandwidth Class D operation with extremely low distortion and outstanding efficiency.
The M200/2 includes a 12 dB / octave filter which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an HD-RLC remote level control (sold separately), the amplifier's level can be controlled from a remote location.
This marine amplifier features white and gray powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.
Rated Continuous (RMS) Power @ 14.4 V
| @ 4 Ω | 75 W RMS x 2 |
| @ 2 Ω | 100 W RMS x 2 |
| Bridged @ 4Ω | 200 W RMS x 1 |
Rated Continuous (RMS) Power @ 12.5 V
| @ 4 Ω | 60 W RMS x 2 |
| @ 2 Ω | 90 W RMS x 2 |
| Bridged @ 4Ω | 180 W RMS x 1 |
General Specifications
| Frequency Response | 12 Hz - 22 kHz (+0, -1dB) |
| S/N Ratio, referred to highest rated power | >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W | >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Damping Factor @ 4 Ω | >150 / 50 Hz |
| Damping Factor @ 2 Ω | >75 / 50 Hz |
| THD+N @ Rated Power | <1% @ 2 Ω per Ch. |
| Input Voltage Range @ RCA Inputs | 100 mV - 4 V RMS |
| Min.Copper Power / Ground Wire Gauge | 8 AWG wire |
| Fuse Rating | 20 A (AFS, AGU or MaxiFuse™) |
Signal Processing
| Filter Mode(s) | Low-Pass or High-Pass |
| Filter Slope(s) | 12 dB/octave |
| Filter Frequency Range | 50 Hz - 500 Hz |
| Detented, Calibrated Filter Freq. Potentiometers | Yes |
| Filter Defeat Function | Yes |
| Channel Input Mode Switch | Yes (2 ch.) |
| Pass-Through Preamp Output | None |
| Source Channel Selection for PreOuts | N/A |
Physical Specifications
| Height (H) | 2.05 in / 52 mm |
| Width (W) | 6.85 in / 216 mm |
| Depth (D) | 7.09 in / 180 mm |
| Net Weight | 3.75 lb / 1.70 kg |
1x JL Audio M3-10IB-C-Gw-4 - M3 10" 4-Ohm Infinite Baffle Marine Subwoofer - Gloss White Classic Grille - (M3-10IB-C-Gw-4)
JL Audio M3-10IB-C-Gw-4 - M3 10" 4-Ohm Infinite Baffle Marine Subwoofer - Gloss White Classic Grille
10-inch infinite baffle subwoofer, 175W, 4 ohms
High-performance Subwoofers, specifically engineered for marine duty
Truly engineered for marine duty.
To ensure long-term performance, all models are designed and built to exceed industry standards for salt-fog and UV exposure. These are salt-water rated products that you can use with confidence.
Outstanding Sound Quality
All models are designed to operate in open-air boat environments, delivering powerful, smooth sound that is several steps beyond common marine speakers. These are not car speakers painted white, they are acoustically engineered for boat installations. Engineered to operate without a dedicated enclosure.
Versatile power requirements
Suitable for use with standard marine head-unit power. Designed to benefit from operation with quality amplification, such as the JL Audio marine amplifiers.
Three great looks to choose from!
Available in two grille styles: “Classic” or “Sport”, both in Gloss White. Sport models are also available in a sleek, all Gunmetal finish.
Allows you to match the look of the speakers to the theme of the boat intrior and the customer’s tastes.
Physical Specifications
| Nominal Diameter | 10.0 in / 250 mm |
| Overall Diameter (A) | 10.75 in / 273 mm |
| Mounting Hole Diameter (B) | 8.875 in / 225 mm |
| Bolt Hole Circle Diameter (C) | 9.706 in / 247 mm |
| Motor Outer Diameter (D) | 5.29 in / 134 mm |
| Mounting Depth (E) | 5.12 in / 130 mm |
| Driver Displacement | 0.04 cu ft / 1.13 L |
| Net Weight | 6.5 lb / 2.94 kg |
Subwoofer Parameters
| Continuous Power Handling (RMS) | 175 Watts |
| Nominal Impedance (Znom) | 4 Ohm |
| Free Air Resonance (Fs) | 41.84 Hz |
| Electrical “Q” (Qes) | 0.806 |
| Mechanical “Q” (Qms) | 11.751 |
| Total Speaker “Q” (Qts) | 0.754 |
| Equivalent Compliance (Vas) | 1.29 cu ft / 36.53 L |
| One-Way Linear Excursion (Xmax)* | 0.42 in / 11 mm |
| Efficiency (1 W / 1 m)** | 87.23 dB SPL |
| Effective Piston Area (Sd) | 50.68 sq in / 0.0327 sq m |
| DC Resistance (Re) | 3.957 Ω |