Description
Included in this kit
This bundle includes 3x JL Audio 6W3v3-4:6.5-inch (165 mm) Subwoofer Driver 4 Ohm, and a JL Audio RD800/6 6-channel full-range amplifier 800 watts.
3x JL Audio 6W3v3-4:6.5-inch (165 mm) Subwoofer Driver 4 Ohm - (6W3v3-4)
6W3v3-4
W3v3 6.5-inch Subwoofer Driver (150 W, 4 Ω)
If you need a small-format subwoofer that really delivers in extremely small enclosures, this is where your search ends. The 6W3v3 is a true subwoofer, through-and-through. It employs the same technologies as its larger diameter brethren to deliver a whopping 0.35 in. (8.9 mm) one-way linear excursion.
The 6W3v3-4 is best used with amplifier power in the 50W - 150W range and is optimized to operate in a tiny 0.15 cu. ft. (4.2 l) sealed enclosure, or a 0.25 cu. ft. (7.1 l) ported enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab.
General Specifications
| Continuous Power Handling (RMS) | 150 W |
| Recommended Amplifier Power (RMS) | 50 - 150 W |
| Nominal Impedance (Znom) | 4 Ω |
Physical Specifications
| Nominal Diameter | 6.5 in / 165 mm |
| Overall Diameter (A) | 6.85 in / 174 mm |
| Mounting Hole Diameter (B) | 5.5 in / 140 mm |
| Bolt Hole Circle Diameter (C) | 6.125 in / 156 mm |
| Motor Outer Diameter (D) | 4.25 in / 108 mm |
| Mounting Depth (E) | 4.25 in / 108 mm |
| Driver Displacement | 0.02 cu ft / 0.57 L |
| Net Weight | 6.1 lb / 2.8 kg |
Parameters
| Free Air Resonance (Fs) | 41.80 Hz |
| Electrical “Q” (Qes) | 0.533 |
| Mechanical “Q” (Qms) | 11.027 |
| Total Speaker “Q” (Qts) | 0.508 |
| Equivalent Compliance (Vas) | 0.181 cu ft / 5.13 L |
| One-Way Linear Excursion (Xmax)* | 0.35 in / 8.89 mm |
| Reference Efficiency (no) | 0.07% |
| Efficiency (1 W / 1 m)** | 80.49 dB SPL |
| Effective Piston Area (Sd) | 17.36 sq in / 0.0112 sq m |
| DC Resistance (Re) | 3.476 Ω |
* Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied.
** For parallel-wired voice coils, divide "Re" by 4. All other specifications remain the same.
*** Re (DC resistance) is measured with the voice coils in series, for parallel-wired specification divide Re by 4. All other specifications remain the same.
Sealed Enclosure Specifications
| Wall Thickness | 0.5 in / 13 mm |
| Front Baffle Thickness | 0.5 in / 13 mm |
| Volume (net int.) | 0.15 cu ft / 4.2 L |
| External Width (W) | 8.5 in / 216 mm |
| External Height (H) | 8.5 in / 216 mm |
| External Depth (D) | 6.25 in / 159 mm |
| F3 | 58.43 Hz |
| Fc | 62.11 Hz |
| Qtc | 0.7548 |
Enclosure Notes
* The enclosure recommendations listed are external dimensions which assume the use of 1/2 in (13 mm) thick material. Do not use any material with a thickness of less than 1/2 in (13 mm) as this may compromise the rigidity of the enclosure.
* All enclosure volumes listed are net internal volumes! Box volume displacement, port displacement and brace displacement must be added to obtain the final gross internal volume. All enclosure dimensions listed have already taken this into account.
* When using two subwoofers in a common enclosure simply double the required volume and, in the case of a ported enclosure, use two times the recommended port(s).
* We recommend the use of this speaker in a bi-amplified system using high-quality satellite speakers and amplifiers. We do not recommend the use of this subwoofer with a passive crossover (coil), as this type of device will adversely affect performance.
Safety Notice
Prolonged exposure to sound pressure levels in excess of 100dB can cause permanent hearing loss. This high-performance speaker can exceed this level. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity.
When installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. We recommend bolting the enclosure through the metal of the floorpan or the frame of the vehicle with large diameter washers for reinforcement. If an enclosure is not firmly attached, it can become a projectile in a collision. This is particularly important in a hatchback, station wagon, sports utility vehicle, or van.
Ported Enclosure Specifications
| Wall Thickness | 0.5 in / 13 mm |
| Front Baffle Thickness | 0.5 in / 13 mm |
| Volume (net int.) | 0.25 cu ft / 7.1 L |
| External Width (W) | 14.50 in / 368 mm |
| External Height (H) | 10.125 in / 257 mm |
| External Depth (D) | 5.25 in / 133 mm |
| Internal Slot Port Width (SW) | 4.25 in / 108 mm |
| Internal Slot Port Height (SH) | 0.5 in / 13 mm |
| Internal Slot Port Length (SL) | 14.75 in / 374 mm |
| Port Extension Length (EL) | 13 in / 330 mm |
| Tuning Frequency (Fb) | 38 Hz |
| F3 | 34.92 Hz |
1x JL Audio RD800/6 6-channel full-range amplifier 800 watts - (RD800/6)
SLEEK, POWERFUL, PACKED WITH VALUE
The look is amazing, and the performance backs it up. These ultracompact full-range RD series amplifiers from JL Audio are engineered to generate loads of power with exceptional efficiency and low distortion. The result: premium audio quality with significantly reduced current draw and heat.
General
Channels: 6
Physical dimensions (Height): 2.13" (54 mm)
Physical dimensions (Width): 14.66" (372 mm)
Physical dimensions (Depth): 6.96" (177 mm)
Weight: 7.15 lbs (3.6 kg)
Operating voltage: 10-15 VDC
Operating temperature range: –4º to 149º F (–20º to 65º C)
Warranty: 2 years
Audio
Amplifier class: Class D
Rated continuous (RMS) power (14.4 V input @ 4 Ohm < 1% THD): 75 W x 4/150 x 2 200 W x 2/400 W x 1 (Bridged)
Rated continuous (RMS) power (14.4 V input @ 2 Ohm < 1% THD): 100 W x 4/200 x 2
Signal-to-Noise Ratio, referred to highest rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth): Analog Inputs >104 dB
Signal-to-Noise Ratio, referred to 1 W (A-weighted, 20 Hz - 20 kHz noise bandwidth): Analog Inputs >84 dB
Damping factor @ 4 Ω: >150/50 Hz
Damping factor @ 2 Ω: >75/50 Hz
THD+N @ Rated Power: <1% @ 4 Ω
Frequency response (+0, -1dB): 12 Hz-22 kHz
Input voltage range @ RCA inputs: Switchable from 200 mV-2 V RMS (Low) to 800 mV-8 V RMS (High)
Signal Processing
Filter mode(s): Channels 1 & 2: High-pass only (Off, x1, x10)
Filter Slope(s): Channels 1 & 2 12 dB/octave
Filter frequency range: Channels 1 & 2: 50 Hz-500 Hz (x10: 500 Hz-5 kHz)
Filter mode(s): Channels 3 & 4: Off, High-pass or Bandpass
Filter Slope(s): Channels 3 & 4 12 dB/octave
Filter frequency range: Channels 3 & 4 50 Hz-500 Hz
Filter mode(s): Channels 5 & 6: Off, High-pass or Bandpass
Filter Slope(s): Channels 5 & 6: 12 dB/octave
Filter frequency range: Channels 5 & 6: 50 Hz-500 Hz
Detented, calibrated filter frequent potentiometers: Yes
Channel input mode switch: yes (2/4/6 Channels)
Pass-through preamp output: Buffered