Kicker 45VL7R102 Single 10" L7R Loaded Vented Enclosure - 500 Watts RMS - w/ Key5001 Amp Bundle

Included in this kit

---

This bundle includes 1x Kicker 45VL7R102 Single 10" L7R Loaded Vented Enclosure - 500 Watts RMS, and 1x Kicker 47KEY5001 500-Watt Mono Channel Amp With Start/Stop Capability.

1x Kicker 45VL7R102 Single 10" L7R Loaded Vented Enclosure - 500 Watts RMS - (45VL7R102)

Kicker 45VL7R102 Single 10" L7R Enclosure

The L7R 10-inch Subwoofer Enclosure is the perfect fit in your trunk and in your life.
KICKER’s square sub technology features patented ribbed corners, UniPlate™ solid pole piece and backplate, and injection-molded SoloKon™ cone system. You get up to 20% more volume compared to a round driver, so you move more air and get more bass! Combined with an optimized front-facing port, reinforced MDF construction, rounded corners and thick black carpet, you get big bass without the expense of a custom enclosure.

Features:
Genuine L7R Subwoofer Included
Front-Facing Port Design for loudest possible bass
Angled Back for Excellent Fit
Heavy Internal Bracing makes is last for years
Single 2-Ohm Terminal for quick installation
Easy to Install and Wire
Thick Black Carpeting to handle bumps and scrapes
Aesthetically pleasing Rounded Corners
Embroidered KICKER Logo
Thick MDF Construction

Specifications
Type - Single
Woofers/size [in, cm] - Solo-Baric L7R 10" 2Ω
Impedance [Ohms] - 2
Power Watts [RMS] - 500
SENSITIVITY [dB 1w/1m] - 88
Box Top Depth (in, cm): - 8-1/4, 21
Box Bottom Depth (in, cm): - 13-7/8, 35.1
Box Height (in, cm): - 13, 33
Box Width (in, cm): - 24, 61

What's in the box?
one loaded enclosure with one 10-inch subwoofers
mounting hardware (4 - black brackets, 4 - #10 black wood screws x 20mm, 8 - #8 black wood screws 20mm long)
one owner's manual
two stickers

1x Kicker 47KEY5001 500-Watt Mono Channel Amp With Start/Stop Capability - (47KEY5001)

Kicker 47KEY5001 KEY 1-Channel DSP Smart Amplifier, 1x500W
The KEY500.1 is a smart subwoofer amplifier and audio processor in one, featuring an AI-driven DSP (digital signal processing). Using KICKER’s supplied test tones, the KEY automatically analyzes the audio being fed into the amplifier. Once this signal has been analyzed, the amp will automatically fix peaks in the signal coming in and restore the low bass that is typically missing. In a matter of moments, you get a clean, even bass response from your amp!

Craft your sound with ease! The KEY500.1 comes with 24dB sub-sonic and low-pass crossovers, bass boost and gain controls.

Measuring about eight inches long and less than two inches high, the KEY500.1 fits nearly anywhere. Mount it behind your glove box, under the seat, or in your trunk with ease.

The amplifier also features FIT 2+™ (Fail-safe Integration Technology 2 PLUS) – which provides nearly universal compatibility with stock or aftermarket radios. Another industry first, the KEY500.1 is uniquely suited to accept factory input signals as high as 40 volts (400 watts). The KEY amplifier will work with almost every car on the road today, whether you have a factory or aftermarket audio system.

Specifications -
• Power (watts/ch), 1 Ohm stereo: 500
• Power (watts/ch), 2 Ohm stereo: 300
• Power (watts/ch), 4 Ohm stereo: 150
• Microphone/Kicker EQ button: included
• Standard dimensions(H x W x L)(in, cm) 1-11/16, 4.3 x 2-3/4, 7 x 7-3/8, 18.7
• Frequency Response (Hz): 10-160
• Input Sensitivity: high level: 1V-40V / low level: 125mV-5V
• Signal-to-Noise Ratio: >90dB, a-weighted, re: rated power
• Selectable Electronic Crossover: Variable Low Pass 40-160 Hz, Variable High Pass 10-40 Hz
• What's in the Box: 1 - fuse holder, 1 - manual and installation hardware