Description
Included in this kit
This bundle includes 1x Kicker 47KEY5001 500-Watt Mono Channel Amp With Start/Stop Capability, 1x Kicker 47VK6 VK6 6AWG Complete Amplifier Wiring Kit w/2CH Interconnects, 1x Kicker 46CXARC CXARC Remote Control for Kicker 46CX Series Amps, and 1x Kicker 48VCVR122 CompVR 12" single subwoofer in vented box, 2-ohm.
1x Kicker 47KEY5001 500-Watt Mono Channel Amp With Start/Stop Capability - (47KEY5001)
Kicker 47KEY5001 KEY 1-Channel DSP Smart Amplifier, 1x500W
The KEY500.1 is a smart subwoofer amplifier and audio processor in one, featuring an AI-driven DSP (digital signal processing). Using KICKER’s supplied test tones, the KEY automatically analyzes the audio being fed into the amplifier. Once this signal has been analyzed, the amp will automatically fix peaks in the signal coming in and restore the low bass that is typically missing. In a matter of moments, you get a clean, even bass response from your amp!
Craft your sound with ease! The KEY500.1 comes with 24dB sub-sonic and low-pass crossovers, bass boost and gain controls.
Measuring about eight inches long and less than two inches high, the KEY500.1 fits nearly anywhere. Mount it behind your glove box, under the seat, or in your trunk with ease.
The amplifier also features FIT 2+™ (Fail-safe Integration Technology 2 PLUS) – which provides nearly universal compatibility with stock or aftermarket radios. Another industry first, the KEY500.1 is uniquely suited to accept factory input signals as high as 40 volts (400 watts). The KEY amplifier will work with almost every car on the road today, whether you have a factory or aftermarket audio system.
Specifications -
• Power (watts/ch), 1 Ohm stereo: 500
• Power (watts/ch), 2 Ohm stereo: 300
• Power (watts/ch), 4 Ohm stereo: 150
• Microphone/Kicker EQ button: included
• Standard dimensions(H x W x L)(in, cm) 1-11/16, 4.3 x 2-3/4, 7 x 7-3/8, 18.7
• Frequency Response (Hz): 10-160
• Input Sensitivity: high level: 1V-40V / low level: 125mV-5V
• Signal-to-Noise Ratio: >90dB, a-weighted, re: rated power
• Selectable Electronic Crossover: Variable Low Pass 40-160 Hz, Variable High Pass 10-40 Hz
• What's in the Box: 1 - fuse holder, 1 - manual and installation hardware
1x Kicker 47VK6 VK6 6AWG Complete Amplifier Wiring Kit w/2CH Interconnects - (47VK6)
Kicker VK6 6AWG Complete Amplifier Wiring Kit w/2CH Interconnects - 47VK6
Kicker V-Series Amplifier Wiring Kits -
• Top-Quality, Full-Spec, Hyper-Flex Power, Ground and Turn-On Cables
• K-Series Speaker Wire and Interconnect Cables
• Heavy-Duty AFS Fuse Holder and Fuse
• Insulated Crimp Connectors, Zip Ties and other Hardware
• One Convenient Kit with Everything that You Need
• All Cables are made with Pure OFC for Max Power Transfer and Superior Clarity
• Additional Year of Warranty When Purchased with a KICKER Amp
In the box -
• 17 ft 6 AWG red power wire
• 4 ft 6 AWG gray ground wire
• Fuse holder with 80 amp fuse
• 17 ft remote wire
• 16.4 ft RCAs
• 12 ft speaker wire
• 6 6" zip ties
• 6 AWG firewall grommet
• 1x butt connector
• 4x fork terminals
• 1x red fork terminal boots
• 1x black fork terminal boots
1x Kicker 46CXARC CXARC Remote Control for Kicker 46CX Series Amps - (46CXARCt)
Kicker 46CXARC Remote / Bass Knob
CX-Series mono amps offer an optional remote level control to adjust your bass right from the dash. Dial it up the way you want to hear it.
CXARC Remote
Customize your bass, right from your front seat.
The CXARC is a remote bass controller, compatible with any CX, DX or PX KICKER amplifier equipped with a REMOTE BASS jack on its end.
1x Kicker 48VCVR122 CompVR 12" single subwoofer in vented box, 2-ohm - (48VCVR122)
Kicker 48VCVR122 12" CompVR Subwoofer in Vented Enclosure, 2-Ohm, 400w RMS
This subwoofer uses a large-diameter, progressive-roll spider and a Santoprene surround for truly linear cone movement. All this technology creates outstanding bass in a subwoofer built to make the mirrors shake. KICKER uses an advanced heat management system. Perimeter venting allows air to circulate while our UniPlate system redirects even more heat away from the motor. You get a cool, reliable speaker that lasts and lasts. A stamped steel basket holds vibration at bay while a pair of high-temp voice coils move an injection molded woofer hundreds of times a second, giving you strong, distortion-free bass.
This enclosure features tough MDF construction with head-duty internal bracing to make sure the only thing vibrating are your ears. The thick embroidered black carpet makes a statement of quality craftsmanship and sound, with front venting to further increase the output of these subwoofers. The pre-wired 2-Ohm terminals on the back make installation a breeze.
Key Features -
• SoloKon Cone System with Vented Back Bracing and Motor Cooling
• Red Stitched Surround for Unsurpassed Reliability
• Legendary KICKER Bass
• Front Venting for Smooth, Powerful Bass
• Extensive Internal Bracing and Thick MDF Construction
• Pre-Wired, Spring-Loaded, Two-Ohm Terminal
• Features the Best-in-Class CompVR Subwoofer
• Factory-Tuned Enclosure for Incredible Bass
• Great for SUVs, Hatchbacks and Car Trunks
VCVR12 Specifications -
• Woofer [in, cm] - 12, 30
• Impedance [Ohms] - 2
• Recommended Amp Power [watts RMS] - 400
• Peak Power Handling [watts] - 800
• Sensitivity [dB 1w/1m] - 95
• Enclosure Depth [in, cm] - 14-1/2, 36.8
• Enclosure Height [in, cm] - 16, 40.6
• Enclosure Width [in, cm] - 23, 58.4
