Description
Included in this kit
This bundle includes a Kicker 46CXA3604 CXA3604 - 4x90-Watt 4-Channel Full-Range Amp, a Kicker 46CSC354 CS-Series CSC35 3.5-Inch (89mm) Coaxial Speakers, 4-Ohm (Pair), a Kicker 46CSC6934 CS-Series CSC693 6x9-Inch (160x230mm) 3-Way Speakers, 4-Ohm (Pair), and a Kicker 46CSC54 CS-Series CSC5 5.25-Inch (130mm) Coaxial Speakers, 4-Ohm (Pair).
1x Kicker 46CXA3604 CXA3604 - 4x90-Watt 4-Channel Full-Range Amp - (46CXA3604)
Kicker 46CXA3604 CX360.4 360 Watt RMS 2-Ohm Stable 4-Channel Amplifier
Using Class A/B power, this amp features a variable bass boost with KickEQā¢, giving you as much as a 6dB of extra bump.
CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality.
This CX-Series Amplifier delivers as much as 90 watts into four full-range channels, or 180 watts into two bridged channels. See below for more details.
Features:
ā¢ Class A/B full-range channels
ā¢ Three-second turn-on/off delay to eliminate unwanted interference
ā¢ Variable 12dB crossovers provides control to dial in perfect sound
ā¢ KickEQā¢ 6dB variable bass boost for those additional low frequencies
ā¢ FIT+ā¢ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
ā¢ Accepts up to 40-volt input signal
ā¢ Small footprint for easier installation
ā¢ Vertical mounting hardware included for another unique look
ā¢ Compatible with CXARC Remote Bass Control
Specifications:
ā¢ MODEL - CXA360.4
ā¢ Power (watts/ch) 4 Ohm Stereo - 65x4
ā¢ Power (watts/ch) 2 Ohm Stereo - 90x4
ā¢ Power (watts/ch) 4 Ohm Mono - 180x2
ā¢ CXRC Remote Bass Capable (sold sep.) - yes
ā¢ Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L) - 12-1/2, 31.7
ā¢ Frequency Response (Hz): - 10Hz-20kHz
ā¢ Input Sensitivity: - 250mV-10V (Low Level), 1V-40V (High Level)
ā¢ Signal-to-Noise Ratio: - 95dB
ā¢ Active Crossover: - HI, LO or OFF; Variable 50ā200Hz @ 12dB/Octave
ā¢ Subsonic Filter: - n/a
ā¢ KickEQā¢ Boost - Variable 0-6dB @40Hz
1x Kicker 46CSC354 CS-Series CSC35 3.5-Inch (89mm) Coaxial Speakers, 4-Ohm (Pair) - (46CSC354)
Kicker 46CSC354 CS-Series 3-1/2 Inch Coaxial Speakers are built for clarity, volume and durability.
These coaxial speakers are a significant upgrade in your sound. A stamped-steel framework supports a rigid polypropylene cone and UV-treated foam surrounds that stand up to heat and direct sunlight, for years of outstanding audio quality.
These CS speakers work best with 30 watts of recommended power.
Fits nearly every car made
Zero-protrusion tweeters to fit nearly any factory depth
Woofer EVCā¢ (Extended Voice Coil) tech assists with precise linear excursion
UV-treated poly-foam surround resists heat or direct sunlight
Large woofer magnet in a heavy-duty motor for ultra-clean bass
PEI-tweeter construction provides superb clarity
Neodymium tweeter magnets allow for increased volume in high frequencies
Specifications -
ā¢ Speaker Design 2 - way
ā¢ Woofer Size | in [mm] 3 1/2 [89]
ā¢ Tweeter Size | in [mm] - 1/2 [13]
ā¢ DC Resistance | ohm - 3.2
ā¢ Peak Power | Watts - 90
ā¢ Continuous Power | Watts, RMS - 30
ā¢ Sensitivity [SPLo] | dB @ 1W, 1m - 88
ā¢ Effective Frequency Range | Hz - 80-20k
ā¢ Mounting Hole Diameter | in [mm] - 3 [78]
ā¢ Top Mount Depth | in [mm] - 1/4 [6]
ā¢ Bottom Mount Depth | in [mm] - 1 11/16 [42]
ā¢ Tweeter Protrusion | in [mm] - 1/8 [3]
ā¢ Grilles - No
ā¢ Tweeter Magnet Material - Neodymium
ā¢ Tweeter Dome Material - PEI [polyether imide]
ā¢ Tweeter Design - Balanced dome
ā¢ Woofer Cone Material - Polypropylene
ā¢ Woofer Surround Material - Polyester foam
The CS-Series delivers remarkable performance and ultra-clean bass, utilizing a heavy-duty motor/magnet structure with EVCā¢ (Extended Voice Coil) for even deeper lows. Polypropylene cones and ribbed, UV-treated surrounds work together for excellent reliability and precise acoustic control.
1x Kicker 46CSC6934 CS-Series CSC693 6x9-Inch (160x230mm) 3-Way Speakers, 4-Ohm (Pair) - (46CSC6934)
Kicker 46CSC6934 CS-Series 6x9-inch 3-Way Speakers are the perfect way to upgrade your factory system.
These coaxial speakers are a significant upgrade in your sound. A stamped-steel framework supports a rigid polypropylene cone and UV-treated foam surrounds that stand up to heat and direct sunlight, for years of outstanding audio quality.
These CS speakers work best with 150 watts of recommended power.
Fits nearly every car made
Zero-protrusion tweeters to fit nearly any factory depth
Woofer EVCā¢ (Extended Voice Coil) tech assists with precise linear excursion
UV-treated poly-foam surround resists heat or direct sunlight
Large woofer magnet in a heavy-duty motor for ultra-clean bass
PEI-tweeter construction provides superb clarity
Neodymium tweeter magnets allow for increased volume in high frequencies
Specifications -
ā¢ Speaker Design - 3 - way
ā¢ Woofer Size | in [mm] - 6x9 [160x230]
ā¢ Mid Size | in [mm] - 2 [50]
ā¢ Tweeter Size | in [mm] - 1/2 [13]
ā¢ DC Resistance | ohm - 3.5
ā¢ Peak Power | Watts - 450
ā¢ Continuous Power | Watts, RMS - 150
ā¢ Sensitivity [SPLo] | dB @ 1W, 1m - 92
ā¢ Effective Frequency Range | Hz - 30-20k
ā¢ Mounting Hole Diameter | in [mm] - 5 5/8 x 8 7/16 [143x215]
ā¢ Top Mount Depth | in [mm] - 7/16 [12]
ā¢ Bottom Mount Depth | in [mm] - 3 3/16 [81]
ā¢ Tweeter Protrusion | in [mm] - 1/16 [1]
ā¢ Grilles - Yes
ā¢ Tweeter Magnet Material - Electric Crystal Motor
ā¢ Tweeter Dome Material - PEI [polyether imide
ā¢ Tweeter Design - Balanced dome
ā¢ Woofer Cone Material - Polypropylene
ā¢ Woofer Surround Material - Polyester foam
ā¢ The CS-Series delivers remarkable performance and ultra-clean bass, utilizing a heavy-duty motor/magnet structure with EVCā¢ (Extended Voice Coil) for even deeper lows. Polypropylene cones and ribbed, UV-treated surrounds work together for excellent reliability and precise acoustic control.
1x Kicker 46CSC54 CS-Series CSC5 5.25-Inch (130mm) Coaxial Speakers, 4-Ohm (Pair) - (46CSC54)
Kicker 46CSC54 CS-Series 5-1/4-Inch Coaxial Speakers are an excellent upgrade from factory speakers.
These coaxial speakers are a significant upgrade in your sound. A stamped-steel framework supports a rigid polypropylene cone and UV-treated foam surrounds that stand up to heat and direct sunlight, for years of outstanding audio quality.
These CS speakers work best with 75 watts of recommended power.
Fits nearly every car made
Zero-protrusion tweeters to fit nearly any factory depth
Woofer EVCā¢ (Extended Voice Coil) tech assists with precise linear excursion
UV-treated poly-foam surround resists heat or direct sunlight
Large woofer magnet in a heavy-duty motor for ultra-clean bass
PEI-tweeter construction provides superb clarity
Neodymium tweeter magnets allow for increased volume in high frequencies
Specifications -
ā¢ Speaker Design - 2 - way
ā¢ Woofer Size | in [mm] - 5 1/4 [130]
ā¢ Tweeter Size | in [mm] - 1/2 [13]
ā¢ DC Resistance | ohm - 3.4
ā¢ Peak Power | Watts - 225
ā¢ Continuous Power | Watts, RMS - 75
ā¢ Sensitivity [SPLo] | dB @ 1W, 1m - 90
ā¢ Effective Frequency Range | Hz - 45-20k
ā¢ Mounting Hole Diameter | in [mm] - 4 1/2 [115]
ā¢ Top Mount Depth | in [mm] - 1/4 [7]
ā¢ Bottom Mount Depth | in [mm] - 1 3/4 [45]
ā¢ Tweeter Protrusion | in [mm] - 0
ā¢ Grilles - Yes
ā¢ Tweeter Magnet Material - Neodymium
ā¢ Tweeter Dome Material - PEI [polyether imide
ā¢ Tweeter Design - Balanced dome
ā¢ Woofer Cone Material - Polypropylene
ā¢ Woofer Surround Material - Polyester foam
ā¢ The CS-Series delivers remarkable performance and ultra-clean bass, utilizing a heavy-duty motor/magnet structure with EVCā¢ (Extended Voice Coil) for even deeper lows. Polypropylene cones and ribbed, UV-treated surrounds work together for excellent reliability and precise acoustic control.