Kicker 12 Inch CVR Woofer Includes Two 52CVR122 Package with 46CXA8001 Amplifier and wire kit

Included in this kit

---

This bundle includes a Kicker 46CXA8001 CXA8001 - 800-Watt Mono Class D Subwoofer Amp, 2x Kicker 52CVR122 - CVR12 CompVR 12-Inch (30cm) Subwoofer, DVC, 2-ohm, and a Kicker 47VK6 VK6 6AWG Complete Amplifier Wiring Kit w/2CH Interconnects.

1x Kicker 46CXA8001 CXA8001 - 800-Watt Mono Class D Subwoofer Amp - (46CXA8001)

Kicker 46CXA8001 CX800.1 800 Watt RMS 1-Ohm Stable Mono Amplifier

Using a Class-D power plant, the CXA800.1 features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump.
CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality.
This CX.1 Amplifier delivers as much as 800 watts into one bass channel. See below for more details.
Features:
• Efficient Class-D amplifier
• Three-second turn-on/off delay to eliminate unwanted interference
• Variable 12dB crossovers provides control to dial in perfect sound
• KickEQ™ 6dB variable bass boost for those additional low frequencies
• 24dB subsonic filter for protection from potentially damaging frequencies
• FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
• Accepts up to 40-volt input signal
• Small footprint for easier installation
• Compatible with CXARC Remote Bass Control
• Vertical mounting hardware included for another unique look

Specifications:
• MODEL - CXA800.1
• Power (watts/ch) 4 Ohm - 300x1
• Power (watts/ch) 2 Ohm - 600x1
• Power (watts/ch) 1 Ohm - 800x1
• CXRC Remote Bass Capable (sold sep.) - yes
• Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L) - 8-1/8, 20.6
• Frequency Response (Hz): - 25-200, +0/-1dB
• Input Sensitivity: - 250mV-10V (Low Level), 1V-40V (High Level)
• Signal-to-Noise Ratio: - >95dB, a-weighted, re: rated power
• Active Crossover: - Variable Lo-pass 50Hz–200Hz, 12dB/octave
• Subsonic Filter: - 25Hz @24dB/octave
• KickEQ™ Boost - Variable 0-6dB @40Hz

2x Kicker 52CVR122 - CVR12 CompVR 12-Inch (30cm) Subwoofer, DVC, 2-ohm - (52CVR122)

12" CompVR 2 Ohm
The reengineered CompVR 12-Inch Subwoofer is a 2Ω dual voice coil design, built for easy wiring.

This subwoofer uses a large-diameter, progressive-roll spider and a Santoprene surround for truly linear cone movement. All this technology creates outstanding bass in a subwoofer built to make the mirrors shake.

The CompVR Subwoofer works best with a sealed or ported enclosure for its substantial power handling.

Specifications
SIZE [in, cm]: 12, 30
IMPEDANCE [Ohms]: 2 DVC
Recommended Amplifier Power (watts RMS) 225-450
Peak Power (watts, per ANSI/CTA-2031-A) 900
SENSITIVITY [dB 1w/1m]: 86.9
MOUNTING DEPTH [in, cm]: 6-3/8, 16.2
MOUNTING DIAMETER [in, cm]: 11, 27.9
MIN SEALED BOX VOL [cu. ft, L]: 1, 28.3
MAX SEALED BOX VOL [cu. ft, L]: 4.6, 130
MIN VENTED BOX VOL [cu. ft, L]: 1.75, 49.6
MAX VENTED BOX VOL [cu. ft, L]: 2.25, 63.7

1x Kicker 47VK6 VK6 6AWG Complete Amplifier Wiring Kit w/2CH Interconnects - (47VK6)

Kicker VK6 6AWG Complete Amplifier Wiring Kit w/2CH Interconnects - 47VK6

Kicker V-Series Amplifier Wiring Kits -
• Top-Quality, Full-Spec, Hyper-Flex Power, Ground and Turn-On Cables
• K-Series Speaker Wire and Interconnect Cables
• Heavy-Duty AFS Fuse Holder and Fuse
• Insulated Crimp Connectors, Zip Ties and other Hardware
• One Convenient Kit with Everything that You Need
• All Cables are made with Pure OFC for Max Power Transfer and Superior Clarity
• Additional Year of Warranty When Purchased with a KICKER Amp

In the box -
• 17 ft 6 AWG red power wire
• 4 ft 6 AWG gray ground wire
• Fuse holder with 80 amp fuse
• 17 ft remote wire
• 16.4 ft RCAs
• 12 ft speaker wire
• 6 6" zip ties
• 6 AWG firewall grommet
• 1x butt connector
• 4x fork terminals
• 1x red fork terminal boots
• 1x black fork terminal boots