Description
Compact Design -
Allows for installation almost anywhere, including tight spaces such as under a seat panel
Remote Control Sound Adjustment -
Volume: Input Sensitivity Control Knob
ACTIVE EQ: Equalizer selector switch
Frequency: Cut-off frequency control Knob
Phase: Phase select switch
New Diaphragm Speaker -
The KSC-PSW7EQ is equipped with a micro-step shape on the long edge of the diaphragm surrounding the diaphragm. This supresses the unwanted movement of the diaphragm, which vibrates like a seesaw in the longitudinal direction during operation, thereby supporting accurate vibration and reproducing accurate bass sound to the music.
Flexible Connectivity and Installation -
Supports speaker level input to connect OEM receiver without RCA outputs. Power turns on from either speaker level or RCA signal.
Amplifier -
• Maximum Output Power: 160W
• Signal to Noise Ratio (1 Ohm at 14.4V): 90dB
• Input Impedance: RCA 22k ohm / Speaker 10k ohm
• Sensitivity: RCA Voltage / Speaker Voltage 0.4mV
• Fuse (Battery Cord): 10A
• Operating Voltage: DC 14.4V (11V - 16V)
• Maximum Current Consumption: 5.9A
Speaker (System) -
• Woofer Size: 8-1/4 x 5-1/2 inch
• Cap Material: Aluminum
• Surround Material: Urethane
• Impedance: 1 Ohms
• Frequency Response: 40Hz-200Hz(-15dB)
• Sensitivity: 89 dB
• Low-Pass Filter (Frequency) Variable: 50Hz - 125Hz, -18dB/oct
• Phase Control: 0° - 180°
General Info -
• Woofer Size: 8-1/4 x 5-1/2" • Max Power (W): 160W • Current Consumption: 5.9A • Sensitivity (dB at 1m): 89dB • Frequency Response (Hz): 40Hz - 200Hz (-15dB) • Speaker Level Input: Yes (Speaker Level Input) • Signal Sensing Turn-on: Yes (Speaker Level or RCA)
Allows for installation almost anywhere, including tight spaces such as under a seat panel
Remote Control Sound Adjustment -
Volume: Input Sensitivity Control Knob
ACTIVE EQ: Equalizer selector switch
Frequency: Cut-off frequency control Knob
Phase: Phase select switch
New Diaphragm Speaker -
The KSC-PSW7EQ is equipped with a micro-step shape on the long edge of the diaphragm surrounding the diaphragm. This supresses the unwanted movement of the diaphragm, which vibrates like a seesaw in the longitudinal direction during operation, thereby supporting accurate vibration and reproducing accurate bass sound to the music.
Flexible Connectivity and Installation -
Supports speaker level input to connect OEM receiver without RCA outputs. Power turns on from either speaker level or RCA signal.
Amplifier -
• Maximum Output Power: 160W
• Signal to Noise Ratio (1 Ohm at 14.4V): 90dB
• Input Impedance: RCA 22k ohm / Speaker 10k ohm
• Sensitivity: RCA Voltage / Speaker Voltage 0.4mV
• Fuse (Battery Cord): 10A
• Operating Voltage: DC 14.4V (11V - 16V)
• Maximum Current Consumption: 5.9A
Speaker (System) -
• Woofer Size: 8-1/4 x 5-1/2 inch
• Cap Material: Aluminum
• Surround Material: Urethane
• Impedance: 1 Ohms
• Frequency Response: 40Hz-200Hz(-15dB)
• Sensitivity: 89 dB
• Low-Pass Filter (Frequency) Variable: 50Hz - 125Hz, -18dB/oct
• Phase Control: 0° - 180°
General Info -
• Woofer Size: 8-1/4 x 5-1/2" • Max Power (W): 160W • Current Consumption: 5.9A • Sensitivity (dB at 1m): 89dB • Frequency Response (Hz): 40Hz - 200Hz (-15dB) • Speaker Level Input: Yes (Speaker Level Input) • Signal Sensing Turn-on: Yes (Speaker Level or RCA)