Description
High Quality Bluetooth Streaming (For D2 100.4 DSP & D2 80.6 DSP Only)
The MOS_BTS is different than other Bluetooth modules in that it can stream audio. It does this via an onboard Digital Signal Processing (DSP) chip. When streaming audio to the MOS_BTS, the DSP converts the radio waves sent from the transmitter device (phone, computer, etc.) into electrical signals that can then be sent to the amplifier and then to your audio output (speakers/headphones). When streaming audio from the module, it converts the electrical signals from the audio input device (mic/line-in) to radio waves for the receiver device (stereo, computer, phone).
Features:
• Fully qualified Bluetooth® version 3.0 module, fully compatible with version 2.1+EDR, 1.2, and 1.1
• Dimensions 35 x 13 x 5 mm
• Embedded Bluetooth stack profiles: A2DP and SPP
• Dual-channel, digital output for highest quality audio
• Supports iAP profile to discover iOS devices and apps
• UART (SPP) data connection interface
• External audio CODECs supported via S/PDIF interface
• Environmentally friendly, RoHS compliant
• Certifications: FCC, ICS, CE
• Bluetooth SIG certified
Specifications:
• Standard Bluetooth 3.0, class 2
• Frequency Band 2.4 ~ 2.48 GHz
• Modulation Method GFSK, PI/4-DQPSK, 8 DPSK
• Maximum Data Rate 3 Mbps
• RF Input Impedance 50 ohms
• Interface UART, GPIO, AIO, USB, SPI, speaker, microphone
• Operation Range 10 meters (33 feet)
• Sensitivity -85 dBm at 0.1 % BER
• RF TX Power 4 dBm
The MOS_BTS is different than other Bluetooth modules in that it can stream audio. It does this via an onboard Digital Signal Processing (DSP) chip. When streaming audio to the MOS_BTS, the DSP converts the radio waves sent from the transmitter device (phone, computer, etc.) into electrical signals that can then be sent to the amplifier and then to your audio output (speakers/headphones). When streaming audio from the module, it converts the electrical signals from the audio input device (mic/line-in) to radio waves for the receiver device (stereo, computer, phone).
Features:
• Fully qualified Bluetooth® version 3.0 module, fully compatible with version 2.1+EDR, 1.2, and 1.1
• Dimensions 35 x 13 x 5 mm
• Embedded Bluetooth stack profiles: A2DP and SPP
• Dual-channel, digital output for highest quality audio
• Supports iAP profile to discover iOS devices and apps
• UART (SPP) data connection interface
• External audio CODECs supported via S/PDIF interface
• Environmentally friendly, RoHS compliant
• Certifications: FCC, ICS, CE
• Bluetooth SIG certified
Specifications:
• Standard Bluetooth 3.0, class 2
• Frequency Band 2.4 ~ 2.48 GHz
• Modulation Method GFSK, PI/4-DQPSK, 8 DPSK
• Maximum Data Rate 3 Mbps
• RF Input Impedance 50 ohms
• Interface UART, GPIO, AIO, USB, SPI, speaker, microphone
• Operation Range 10 meters (33 feet)
• Sensitivity -85 dBm at 0.1 % BER
• RF TX Power 4 dBm