Description
Included in this kit
This bundle includes a MTX Audio JH5001 Jackhammer Series 500W x 1 @ 1-Ohm Class D Mono Block Amplifier, and a MTX Audio 5512-44 55-Series 12" 400W RMS Dual 4-Ohm Subwoofer.
1x MTX Audio JH5001 Jackhammer Series 500W x 1 @ 1-Ohm Class D Mono Block Amplifier - (JH5001)
MTX JH5001
Jackhammer Series 500 Watt Monoblock Subwoofer Amplifier
Easy Access Controls
Accessing the fully adjustable gain, low pass filter, subsonic filter and bass boost from the front panel allows for easy adjustment after the unit is installed. This layout is simple and elegant, giving the JH5001 a sophisticated look with the convenience of easy accessibility.
Only What You Need
The JH5001 is designed for one thing, bringing the power to whatever subwoofers you hook it up to. The input section features high quality RCAs for easy connection to after market head units or processors. The Input Level selection is either Pre or Spk In so it can also be used with factory radios that don't have RCA outputs. The Auto Turn On feature is selectable, enabling the unit to turn on when it senses signal, eliminating the need to run a remote wire, or it can be turned on using a remote wire, the choice is yours.
High Quality Power and Speaker Connections
The JH5001 can accept up to a standard 1/0-gauge power and ground wire for optimal performance. The speaker terminals can accept up to 12-gauge speaker. The speaker connection terminal has two sets of positive and negative terminals for easy wiring, the JH5001 can play loads down to 1Ω. Both sets of connectors use set screw style fittings that ensure proper connection and continual signal transfer.
FEATURES • Variable Subsonic Filter
• Top Mount Controls
• Variable Crossovers
• Selectable Turn On Input
• Selectable Input Signal
• Remote Bass Knob
SPECIFICATIONS • Description: Mono Block
• Topology: Class D
• 4Ω RMS Power Output: 225W x 1 Channel
• 2Ω RMS Power Output: 375W x 1 Channel
• 1Ω RMS Power Output: 550W x 1 Channel
• THD: Less Than 1%
• Signal to Noise Ratio: 72dB
• Frequency Response: 20Hz - 250Hz
• Crossover: 40Hz to 250Hz, 12dB/Oct
• Subsonic Filter: 20Hz to 50Hz, 12dB/Oct
• Bass Boost: 0 - 12dB @ 45Hz
• Maximum Input Signal: 10V
• Height: 2.57" (65.2mm)
• Width: 7.61" (193.4mm)
• Depth: 8.97" (228mm)
1x MTX Audio 5512-44 55-Series 12" 400W RMS Dual 4-Ohm Subwoofer - (5512-44)
MTX 5512-44
12" 400-Watt RMS Dual 4Ω Car Audio Subwoofer
55 Series Subwoofers are high SPL subwoofers that deliver the most bass for your buck.
Implementing many of the same features found on our 75 & 95 Series SuperWoofers, the 55 Series can rock hard and loud for extended periods of time, while maintaining accurate and clean bass throughout the party. You will be impressed.
The 5512-44 is a 12″ dual voice coil, 400 watt, 4 ohm subwoofer built on the MTX tradition of getting more than expected. The 55 Series subs are often used in applications where bass levels are the most important factor. These subwoofers are designed to move air and go boom! They are true monsters of bass and are a great choice for anyone that really wants to be heard.
The 55 Series, MTX's best selling subwoofer family, is a perfect mix of performance and value for enthusiasts that want to add extreme bass to their system without breaking the bank. We have squeezed an oversized cone into the standard 10", 12" and 15" frames, so the sub moves more air and gives you more bass. The woofer's movement cools the sub as it plays, so it doesn't overheat when you're rocking out. The special suspension exerts extra control when you're pushing the sub hard. Some would say that we've once again out done ourselves, but it only gets better and better.
SPECIFICATIONS:
• RMS Power (Watts): 400
• Recommended Amp Power (RMS): 200 - 400
• Frequency Response: 26Hz - 130Hz
• Impedance: Dual 4Ω
• Sensitivity: 85.7 dB
• Voice Coil: 2" (5.08 cm)
• Magnet Weight: 56 oz
• Mounting Depth: 6.188"
• Cut Out Diameter: 11.125"
• Volume Displacement (cu in): 52.46 cu in
• Sealed Enclosure Net Volume: 1 cu ft
• Vented Enclosure Net Volume: 2.32 cu ft