MTX JH5001 Jackhammer Series 500W x 1 @ 1-Ohm Class D Mono Block Amplifier, and (2) MTX 3510-02 35-Series 10" 250W RMS 2-Ohm Subwoofer

Included in this kit

---

This bundle includes a MTX Audio JH5001 Jackhammer Series 500W x 1 @ 1-Ohm Class D Mono Block Amplifier, and 2x MTX Audio 3510-02 35-Series 10" 250W RMS 2-Ohm Subwoofer.

1x MTX Audio JH5001 Jackhammer Series 500W x 1 @ 1-Ohm Class D Mono Block Amplifier - (JH5001)

MTX JH5001
Jackhammer Series 500 Watt Monoblock Subwoofer Amplifier

Easy Access Controls
Accessing the fully adjustable gain, low pass filter, subsonic filter and bass boost from the front panel allows for easy adjustment after the unit is installed. This layout is simple and elegant, giving the JH5001 a sophisticated look with the convenience of easy accessibility.

Only What You Need
The JH5001 is designed for one thing, bringing the power to whatever subwoofers you hook it up to. The input section features high quality RCAs for easy connection to after market head units or processors. The Input Level selection is either Pre or Spk In so it can also be used with factory radios that don't have RCA outputs. The Auto Turn On feature is selectable, enabling the unit to turn on when it senses signal, eliminating the need to run a remote wire, or it can be turned on using a remote wire, the choice is yours.

High Quality Power and Speaker Connections
The JH5001 can accept up to a standard 1/0-gauge power and ground wire for optimal performance. The speaker terminals can accept up to 12-gauge speaker. The speaker connection terminal has two sets of positive and negative terminals for easy wiring, the JH5001 can play loads down to 1Ω. Both sets of connectors use set screw style fittings that ensure proper connection and continual signal transfer.

FEATURES • Variable Subsonic Filter
• Top Mount Controls
• Variable Crossovers
• Selectable Turn On Input
• Selectable Input Signal
• Remote Bass Knob
SPECIFICATIONS • Description: Mono Block
• Topology: Class D
• 4Ω RMS Power Output: 225W x 1 Channel
• 2Ω RMS Power Output: 375W x 1 Channel
• 1Ω RMS Power Output: 550W x 1 Channel
• THD: Less Than 1%
• Signal to Noise Ratio: 72dB
• Frequency Response: 20Hz - 250Hz
• Crossover: 40Hz to 250Hz, 12dB/Oct
• Subsonic Filter: 20Hz to 50Hz, 12dB/Oct
• Bass Boost: 0 - 12dB @ 45Hz
• Maximum Input Signal: 10V
• Height: 2.57" (65.2mm)
• Width: 7.61" (193.4mm)
• Depth: 8.97" (228mm)

2x MTX Audio 3510-02 35-Series 10" 250W RMS 2-Ohm Subwoofer - (Tue Feb 01 3510 02:00:00 GMT-0600 (Central Standard Time))

MTX 3510-02
10" 250-Watt RMS 2Ω Car Audio Subwoofer

Implementing many of the same features found on our 75 & 95 Series SuperWoofers, the 35 Series can rock hard and loud for extended periods of time, while maintaining accurate and clean bass throughout the party. You will be impressed.

The 3510-02 is a 10" single voice coil, 2 ohm, 250 watt Car Audio Subwoofer designed to deliver outstanding SPL and sound quality in an affordable combination of state-of-the-art MTX sub features...and it rocks.

The MTX Inverted Apex Surround
This subwoofer features a new Inverted Apex surround that increases surface area allowing for more air movement and higher SPL, and a progressive suspension that lowers distortion resulting in improved Low profile sound quality. This subwoofer also incorporates Spider Plateau Venting which is a mechanical cooling process that targets cool air at the voice coil effectively managing the temperature for long term performance.
35 Series subwoofers are ideal for improving the sound in any vehicle. Their low profile does not require a large enclosure so they are perfect for most vehicles. SPECIFICATIONS:
• Recommended Amp Power (RMS): 125 - 250
• Impedance: 2Ω
• Frequency Response: 28Hz - 130Hz
• Sensitivity: 83.2dB
• Voice Coil: 1.75" (4.45 cm)
• Magnet Weight: 56 oz
• Mounting Depth: 4.625"
• Cut Out Diameter: 9.188"
• Volume Displacement (cu in): 19.40 cu in
• Sealed Enclosure Net Volume: 0.75 cu ft
• Vented Enclosure Net Volume: 2.0 cu ft