Description
Included in this kit
This bundle includes a MTX Audio JH15001 Jackhammer Series 1650W x 1 @ 1-Ohm Class D Mono Block Amplifier, and 3x MTX Audio S6512-44 S65-Series Square 12" 500W RMS Dual 4-Ohm Subwoofer.
1x MTX Audio JH15001 Jackhammer Series 1650W x 1 @ 1-Ohm Class D Mono Block Amplifier - (JH15001)
MTX JH15001
Jackhammer Series 1500 Watt Monoblock Subwoofer Amplifier
Easy Access Controls
Accessing the fully adjustable gain, low pass filter, subsonic filter and bass boost from the front panel allows for easy adjustment after the unit is installed. This layout is simple and elegant, giving the JH15001 a sophisticated look with the convenience of easy accessibility.
Only What You Need
The JH15001 is designed for one thing, bringing the power to whatever subwoofers you hook it up to. The input section features high quality RCAs for easy connection to after market head units or processors. The Input Level selection is either Pre or Spk In so it can also be used with factory radios that don't have RCA outputs. The Auto Turn On feature is selectable, enabling the unit to turn on when it senses signal, eliminating the need to run a remote wire, or it can be turned on using a remote wire, the choice is yours.
High Quality Power and Speaker Connections
The JH15001 can accept up to a standard 1/0-gauge power and ground wire for optimal performance. The speaker terminals can accept up to 12-gauge speaker. The speaker connection terminal has two sets of positive and negative terminals for easy wiring, the JH15001 can play loads down to 1Ī©. Both sets of connectors use set screw style fittings that ensure proper connection and continual signal transfer.
FEATURES ā¢ Variable Subsonic Filter
ā¢ Top Mount Controls
ā¢ Variable Crossovers
ā¢ Selectable Turn On Input
ā¢ Selectable Input Signal
ā¢ Remote Bass Knob
SPECIFICATIONS ā¢ Description: Mono Block
ā¢ Topology: Class D
ā¢ 4Ī© RMS Power Output: 650W x 1 Channel
ā¢ 2Ī© RMS Power Output: 1100W x 1 Channel
ā¢ 1Ī© RMS Power Output: 1650W x 1 Channel
ā¢ Signal to Noise Ratio: 68dB
ā¢ Frequency Response: 20Hz - 250Hz
ā¢ Crossover: 40Hz to 250Hz, 12dB/Oct
ā¢ Subsonic Filter: 20Hz to 50Hz, 12dB/Oct
ā¢ Bass Boost: 0 - 12dB @ 45Hz
ā¢ Maximum Input Signal: 10V
ā¢ Height: 2.57" (65.2mm)
ā¢ Width: 7.61" (193.4mm)
ā¢ Depth: 15.28" (388mm)
3x MTX Audio S6512-44 S65-Series Square 12" 500W RMS Dual 4-Ohm Subwoofer - (S6512-44)
MTX S6512-44
12" 500 Watt RMS Dual 4-Ohm Square Car Audio Subwoofer
SPECIFICATIONS:
ā¢ Recommended Amp Power (RMS): 250 - 500
ā¢ Frequency Response: 23Hz - 130Hz
ā¢ Sensitivity: 86.7dB (1W/1m)
ā¢ Impedance: Dual 4Ī©
ā¢ Volume Displacement (cu in): 68.47
ā¢ Voice Coil: 2" (5.08 cm)
ā¢ Mounting Depth: 6.9375" (17.62cm)
ā¢ Cut Out Diameter: 11.125" (28.26cm)
Patented Technology
The surround geometry on the S65 Series, protected by US patent #7,275,620, increases the effective Xmax of the subwoofer, resulting in higher SPL and volume displacement, which translates to more dB that comparable subwoofers from other manufacturers. This patented design makes the S65 the loudest 500-watt square subwoofer in the market today.
Cool Under Pressure
Spider Plateau Venting is a mechanical cooling process that circulates hot air for cool air at the voice coil as the subwoofer continuously cycles. The constant movement of hot air out and cooler air in, targeted directly at the 2.0" high temperature voice coil increases reliability and longetivity.
Radial Ribbed T-Yoke
The specially designed backplate on the S65 Series not only gives it an impressive stance, but acts as an additional medium to conduct heat away from the voice coil. The increased surface area of the backplate dissipates additional heat ensuring the S65 subwoofer plays with lower distortion for extended periods.