MTX Audio JH7005 Jackhammer 5 Ch. Amp, (2) 35-Series Shallow 10" Subwoofer Bundle

Included in this kit

---

This bundle includes a MTX Audio JH7005 Jackhammer Series 90W x 4 & 450W x 1 @ 2-Ohm Full Range Class D 5-Channel Amplifier, and 2x MTX Audio 3510-04S 35-Series 10" 300W RMS 4-Ohm Shallow Mount Subwoofer.

1x MTX Audio JH7005 Jackhammer Series 90W x 4 & 450W x 1 @ 2-Ohm Full Range Class D 5-Channel Amplifier - (JH7005)

MTX JH7005
Jackhammer Series 700 Watt Five Channel Full System Amplifier

Easy Access Controls
The JH7005 is fully loaded and ready to drive an entire system. The top panel includes controls for both full range speakers, gain, crossover and frequency adjustment, as well as controls for the subwoofer output including fully adjustable gain, low pass filter, subsonic filter and bass boost.

Only What You Need
The JH7005 has the functionality to power a complete system including full range speakers and subwoofer(s). The input section features high quality RCAs (front, rear, sub) for easy connection to after market head units or processors. The Input Level selection is either Pre or Spk In so it can also be used with factory radios that don't have RCA outputs. The unit can also be used in either 5-channel, 4-channel or 2-channel modes depending on the Input Mode selection.

High Quality Power and Speaker Connections
The JH7005 can accept up to a standard 1/0-gauge power and ground wire for optimal performance. The speaker terminals can accept up to 12-gauge speaker. Both sets of connectors use set screw style fittings that ensure proper connection and continual signal transfer.

FEATURES • All-In-One System Design
• Top Mount Controls
• Variable Crossovers
• Selectable Turn On Input
• Selectable Input Signal
• Variable Subsonic Filter
• Remote Bass Knob
SPECIFICATIONS • Description: 5-Channel
• Topology: Class AB + D
• 4Ω RMS Power Output: 60W X 4 Channel, 275W x 1 Channel
• 4Ω Bridged: 180W x 2 Channel
• 2Ω RMS Power Output: 90W x 4 Channel, 450W x 1 Channel
• THD: Less Than 1%
• Signal to Noise Ratio: 60dB
• Frequency Response: 20Hz to 20kHz (4 channels), 20Hz - 250Hz (subwoofer)
• Crossover: 40Hz to 250Hz, 12dB/Oct
• High Pass Filter: 40Hz to 250Hz, 12dB/Oct
• Subsonic Filter: 20Hz to 50Hz, 12dB/Oct
• Bass Boost: 0 - 12dB @ 45Hz
• Maximum Input Signal: 10V
• Height: 2.57" (65.2mm)
• Width: 7.61" (193.4mm)
• Depth: 15.47" (393mm)

2x MTX Audio 3510-04S 35-Series 10" 300W RMS 4-Ohm Shallow Mount Subwoofer - (3510-04S)

MTX 3510-04S
10" 300-Watt RMS 4Ω Shallow Car Audio Subwoofer

The 35 Series shallow subwoofers utilize technologies found in other MTX subwoofers to deliver exceptional bass in a variety of applications. Its shallow mount design make it perfect for tight spaces where you still need bass.

The 3510-04S is a 10" single voice coil, 4Ω, 300-watt shallow mount Car Audio Subwoofer designed to deliver outstanding SPL and sound quality in an affordable combination of state-of-the-art MTX technologies.

The MTX Inverted Apex Surround
This subwoofer features a new Inverted Apex surround that increases surface area allowing for more air movement and higher SPL, and a progressive suspension that lowers distortion resulting in improved Low profile sound quality. This subwoofer also incorporates Spider Plateau Venting which is a mechanical cooling process that targets cool air at the voice coil effectively managing the temperature for long term performance.
35 Series subwoofers are ideal for improving the sound in any vehicle. Their low profile does not require a large enclosure so they are perfect for most vehicles. SPECIFICATIONS:
• Recommended Amp Power (RMS): 150 - 300
• Frequency Response: 28Hz - 130Hz
• Impedance: 4Ω
• Sensitivity: 83.7db (1W/1m)
• Voice Coil: 2" (5.08 cm)
• Magnet Weight: 44 oz
• Mounting Depth: 3.375" (8.57cm)
• Cut Out Diameter: 9.125" (23.18cm)
• Volume Displacement (cu in): 24.55 cu in
• Sealed Enclosure Net Volume: .7 cu ft