Description
Included in this kit
JL Audio MX500/1
Engineered specifically for powersports applications, the MX500/1 monoblock amplifier employs our high-speed NexDā¢ switching design to pack a serious audio punch, without straining charging systems. Its tiny, cast aluminum chassis is highly resistant to corrosion, with an IPX7 water-resistance rating, making it perfect for motorcycles, ATVās or other utility vehicles.
With a robust 500W of clean power into a 2-ohm load (14.4V, 1% THD), use one to drive a subwoofer, or grab a pair to deliver stunning output to a subwoofer system. The MX500/1 also features an adjustable low-pass crossover, a bass boost EQ, variable infrasonic filter and output polarity switch.
Its dual-range input section accepts a wide range of input voltage levels, from line-level all the way to high-power speaker level signals. With the addition of an M-RBC-1 remote level control (sold separately), subwoofer output can be directly controlled from the driverās seat.
Rated Continuous (RMS) Power @ 14.4 V
| @ 4 Ī© | 300 W RMS x 1 |
| @ 3 Ī© | 400 W RMS x 1 |
| @ 2 Ī© | 500 W RMS x 1 |
| @ 1.5 Ī© | N/A |
Rated Continuous (RMS) Power @ 12.5 V
| @ 4 Ī© | 250 W RMS x 1 |
| @ 3 Ī© | 300 W RMS x 1 |
| @ 2 Ī© | 400 W RMS x 1 |
| @ 1.5 Ī© | N/A |
General Specifications
| Frequency Response | 20 Hz - 12 kHz (+0, -1dB) |
| S/N Ratio, referred to highest rated power | >97 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W | >70 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Damping Factor @ 4 Ī© | >115 / 50 Hz |
| Damping Factor @ 2 Ī© | >54 / 50 Hz |
| THD+N @ Rated Power | <1% @ 2 Ī© |
| Input Voltage Range @ RCA Inputs | Switchable from 250 mV - 4 V RMS (Low) to 750 mV - 15 V RMS (High) |
| Min.Copper Power / Ground Wire Gauge | 4 AWG wire |
| Fuse Rating | 50 A (AFS, AGU or MaxiFuseā¢) |
Signal Processing
| Filter Mode(s) | Low-Pass only |
| Filter Slope(s) | 24 dB/octave |
| Filter Frequency Range | 40 Hz - 400 Hz |
| Detented, Calibrated Filter Freq. Potentiometer | Yes |
| Filter Defeat Function | Yes |
| Infrasonic Filter | 20 Hz - 40 Hz, variable |
| Bass Boost EQ | 0 to +12 dB @ 43 Hz |
| Output Polarity Switch | Yes |
| Remote Subwoofer Level Control | Optional (M-RBC-1) |
| Remote Bass EQ Boost Control | No |
| Pass-Through Preamp Output | None |
Physical Specifications
| Height (H) | 1.77 in / 45 mm |
| Width (W) | 9.33 in / 237 mm |
| Depth (D) | 4.50 in / 115 mm |
Used Frequently Asked Questions
- What does used mean? Used products may be unused customer returns that are essentially "new" items, or they may be previously installed products that were returned under warranty or during our return policy period.
- What is the warranty? All of our used items come with a 90-day warranty.
- What's it look like? All of our used items are inspected and graded by our returns team at our facilities. They will test them and grade them to one of four standard gradings: Used Open Box, Used Very Good, Used Good, and Used Acceptable. Please see the following descriptions of each grade - also note that if an item falls under ANY of the criteria for a certain grade, even though the rest of the product is better, we will give it the lowest grade.
- Used Open Box An item in perfect working condition. Original protective wrapping may be missing, but the original packaging is intact and in good condition with minor damage possible. Instructions are included.
- Used Very Good A well-cared-for item with limited use, remains in good working condition. The item may show some limited signs of wear,small scratches,cosmetic blemishes. Item may arrive with damaged packaging or be repackaged and could be missing some accessories.
- Used Good The item shows wear from use, remains in good condition and functions properly. May have damaged packaging or be repackaged. It may be marked, have identifying markings on it, have minor cosmetic damage. It may be missing some parts or accessories.
- Used Acceptable The item is fairly worn but continues to function properly. While repackaged; signs of wear can include aesthetic issues; scratches, dents. The item may have markings on it or show signs of previous use. Item may be missing some parts or accessories.
- Have more questions? Call us, send us a chat, or an email. We'll be able to answer any additional questions you may have.