Description
4 -Channel Class D Amplifier: 4 X 90w
Features:
• High efficiency amplifier with 4 x 90 Wrms / 4 Ohm output power.
• Fully bridgeable and 2 ohm stable, inputs high and low level.
• Load resistor and ground lift selectable via jumpers, switchable active crossovers.
• Ideal for use in smart OEM projects, or with the EXT4link patch cable as a supplement to a PICO 8|12 DSP.
Specifications:
• DC-DC converter typology: Unregulated
• Conversion frequency: 45 KHz (± 6 %)
• Absolute maximum operation supply voltage range: 10 V ÷ 16 V
• Recommended operation supply voltage range: 10 V ÷ 14.4 V
• Power-on/Power-off Voltage Threshold: 9.5 V / 6.5 V
• Mute delay time: 3 secs
• Secondary voltages (Rail / Service): ±34.4 V / ±14.8 V
• Max output offset voltage (each channel): ±150 mV
• Standby current: < 0.1 mA (typical)
• Idle current @ 14V4 (no signal): 0.92 A
• Thermal protection consumption: < 1 mA
• Battery ground vs secondary ground decoupling: 1 KOhm
• Body ground vs battery ground decoupling: 0 Ohm
• Bandwidth (-3dB ÷ 1 Watt): < 10 Hz ÷ 40 KHz
• S/N ratio (AP filter 10 Hz - 500 KHz ) – Power rating ref: 29 dB
• S/N ratio (AP filter 10 Hz - 22 KHz ) – Power rating ref: 44 dB (“A” weighted)
• Eq. Input noise (AP filter 10 Hz - 500 KHz ): 11,7 mV
• Eq. Input noise (AP filter 10 Hz - 22 KHz ): 2 mV (“A” weighted)
• Channel separation@ 100Hz / 1KHz / 10KHz – 10 Watt ref: 57 / 59 / 54 (dB)
• Crossover: HP (CH1/2) / HP or LP (CH3/4) [80Hz – 12dB/oct]
• Thermal cutoff Threshold: 82 °C (±5°C)
• Recovery Temperature Threshold: 72 °C (±5°C)
• Load drive limitations (*): 2 Ohm / 4 Ohm (SE / BTL)
• Suggested fuse: 30 A (onboard)
Features:
• High efficiency amplifier with 4 x 90 Wrms / 4 Ohm output power.
• Fully bridgeable and 2 ohm stable, inputs high and low level.
• Load resistor and ground lift selectable via jumpers, switchable active crossovers.
• Ideal for use in smart OEM projects, or with the EXT4link patch cable as a supplement to a PICO 8|12 DSP.
Specifications:
• DC-DC converter typology: Unregulated
• Conversion frequency: 45 KHz (± 6 %)
• Absolute maximum operation supply voltage range: 10 V ÷ 16 V
• Recommended operation supply voltage range: 10 V ÷ 14.4 V
• Power-on/Power-off Voltage Threshold: 9.5 V / 6.5 V
• Mute delay time: 3 secs
• Secondary voltages (Rail / Service): ±34.4 V / ±14.8 V
• Max output offset voltage (each channel): ±150 mV
• Standby current: < 0.1 mA (typical)
• Idle current @ 14V4 (no signal): 0.92 A
• Thermal protection consumption: < 1 mA
• Battery ground vs secondary ground decoupling: 1 KOhm
• Body ground vs battery ground decoupling: 0 Ohm
• Bandwidth (-3dB ÷ 1 Watt): < 10 Hz ÷ 40 KHz
• S/N ratio (AP filter 10 Hz - 500 KHz ) – Power rating ref: 29 dB
• S/N ratio (AP filter 10 Hz - 22 KHz ) – Power rating ref: 44 dB (“A” weighted)
• Eq. Input noise (AP filter 10 Hz - 500 KHz ): 11,7 mV
• Eq. Input noise (AP filter 10 Hz - 22 KHz ): 2 mV (“A” weighted)
• Channel separation@ 100Hz / 1KHz / 10KHz – 10 Watt ref: 57 / 59 / 54 (dB)
• Crossover: HP (CH1/2) / HP or LP (CH3/4) [80Hz – 12dB/oct]
• Thermal cutoff Threshold: 82 °C (±5°C)
• Recovery Temperature Threshold: 72 °C (±5°C)
• Load drive limitations (*): 2 Ohm / 4 Ohm (SE / BTL)
• Suggested fuse: 30 A (onboard)