Rockford Fosgate HD14CVO-STAGE3 Six Speakers & Amplifier Kit Compatible With Select 14-23 Road Glide CVO And Street Glide CVO

Do you enjoy hitting the road on your motorcycle but are tired of not enjoying your music because you can't hear it when riding? The Rockford Fosgate TMS series of motorcycle speakers solve that problem. The TMS57 full range coaxial speaker is designed to replace existing 5"x7" speakers in factory equipped Harley-Davidson® "Boom!™ Audio" and "Boom!™ Audio Stage-I" bag lids. NOTE: This is NOT compatible with "Boom!™ Audio Stage-II" systems, nor do we recommend modifying the speaker to fit on Stage-II systems. See Compatibility Tab for complete motorcycle fit guide.

It features a Neodymium motor structure driving a reinforced polypropylene cone with Santoprene surround. Highs are produced by an ultra-efficient 25mm dome tweeter with integrated phase plug and is made water/weather resistant with the addition of a Santoprene front isolation spider connecting between the tweeter housing and cone assembly. The speaker features two types of connectors, a standard set of terminals for 2013 and older generation motorcycles, and a new Deutsch style connector for 2014 and newer.

Boom! is a trademark, Harley and Harley-Davidson are registered trademarks of H-D U.S.A., LLC.

• Element Ready design that is weather and water resistant
• Carbon‐Fiber Re‐Inforced Polypropylene Cone
• Santoprene VAST Surround
• Co‐Molded Cone and Surround
• Poly‐Cotton Spider
• Santoprene Front Isolation Spider
• High Power 35mm Voice‐Coil
• Ultra‐Efficient Neodymium Dual Magnet Motor Structure
• Ultra‐High Temperature Glass Reinforced Polymer Frame
• Integrated Spade Terminals
• Integrated 6dB Crossover with High Power Polyester Capacitor
• Ultra‐Efficient 25mm Proprietary Film Dome Tweeter
• Neodymium Tweeter with Integrated Phase Plug and ASA Grill
• Low Profile Coaxial Tweeter Design
• Discreet (Hidden) Tweeter Wire
• Factory H-D® connector for plug-n-play operation
• 2-Year Warranty

Rockford Fosgate amplifiers are known world-wide for producing more power than their ratings suggest. The M5 amplifiers are the first series based on new industry standard Dynamic Power ratings, bringing their conservative ratings to the forefront. Engineered from the ground up and purpose-built to deliver more output where you actually hear it, this is real dynamic power that performs not only on paper, but performance heard through the musical experience. You’ll see two amplifier power ratings, the traditional Continuous Power output, and the new Dynamic Power output, both tested in accordance with the CTA-2006 specification. Consider Continuous Power as wattage developed on the test bench for comparison against other amplifiers in the same class, and Dynamic Power as real-world wattage when connected to a speaker load, listening to music. Either way you look at it, Rockford Fosgate is proving – once again – these amplifiers are powerful enough to drive any speaker or subwoofer you throw at them.

• Element Ready™ design with integrated harness & panel seals
• PRESET removes the need to set-up and tune the amp when used with Rockford Fosgate UTV audio kits
• Play all day, easy to integrate, and keep music playing for extended lengths of time
• C.L.E.A.N. input/output clip detection and indicator LEDs
• Constant Power provides instantaneous delivery of output over varying impedance loads
• Focused mass heat sink allows critical aluminum material to be located around hottest internal devices
• Top mounted control panel with Element Ready™ smoked lens cover
• OEM and aftermarket radio integration inputs
• Low Impedance Stability
• Proprietary testing using RATS (Rockford Automated Testing System)
• Proprietary Class-AD technology allows amplifier to produce more power with less current draw
• Discrete Surface Mount technology utilizes 1% tight-tolerances for high efficiency and reduced cross-talk
• MESHA 4 reduces MOSFET temps, lowers distortion, increases durability and prolongs device life span
• Chassis Isolation from mounting points greatly reduces possible introduction of vehicle noise
• Balanced Differential Inputs eliminates noise picked up by signal cables
• Remote-Out feature when using high level inputs
• 2-Year Warranty

This complete kit includes a heatsink, bracket, hardware and wiring harness needed to install the M5-800X4 amplifier on select 2014 and newer Harley-Davidson® motorcycles. T-Harness allows for complete electrical integration without cutting or modifying factory wiring. Includes Boom!™ Audio bypass plugs for factory Harman Kardon® amplified systems and a Digital Signal Processor loop-thru for adding a DSR1 signal processor.

You must flash your factory radio to use this kit. Ready to flash? Here’s a list of dealers that can flash your radio. Refer to our COMPATIBILITY chart to verify fitment before purchasing.

Harley-Davidson® , Road Glide®, Street Glide®, Electra Glide® and Boom!® Audio are registered trademarks of Harley-Davidson Motor Company. CVO™ is a trademark of Harley-Davidson Motor Company. Harom Kardon is a registered trademark of Harman/Kardon International Industries, Inc.

The next step in motorcycle performance, featuring simple plug-and-play installation creates the best in class on-bike audio experience.

Features/Benefits:

Plug-and-Play Design: Designed to work right out of the box. Everything is included to make for easy installation and all to ensure less time in the garage and more time out riding.

Element Ready™: Purpose built for the harsh motorcycle environment. The speakers and amplifier are designed to stand up to water, dirt, UV, and motorcycle vibration, ensuring that your audio system will stand the test of time.

Compatibility Chart: Please review below tab for fitment before purchasing.

Key Features

• FULL spec cable - meets or exceeds AWG (American Wire Gauge) requirements
• 100% Pure Crystal-Oxygen Free Copper (PC-OFC)
• Plug and Play design for easy installation
• Designed for use with 2014-Current Harley-Davidson® Motorcycles
• 90-degree harness included with amp install kit for Road Glide® installations
• Y-adaptors included in amp install kit supports expansion of lower fairing, saddlebag, or Tour-Pak® speakers
• Designed for use with M5-800X4 amplifier
• Designed for use with TM400X4ad amplifier
• T-harness integration supports front/rear fader control (requires "Rockford Fosgate 2014+ All Bikes" flash)
• Includes mounting brackets for Bat Wing and Shark Nose fairings
• Includes Boom!™ Audio bypass plugs for factory Harmon/Kardon® amplified systems
• Factory Harley-Davidson® radio must be flashed to use this kit

Specifications:

• Battery PWR/GND Gauge: 8 AWG
• Fuse Type: MAXI
• Fuse Size: 60 Amp
• Amplifier PWR/GND Gauge: 8 AWG
• Speaker Wire Gauge: 16 AWG
• Dual Amp Installation Kit: No