WAVTECH LINK750.1PLUS + LINK700.4PLUS + BASS KNOB

Included in this kit

---

This bundle includes a Wavtech Link700.4plus 700 Watt 4-Channel Amplifier, a Wavtech LINK750.1PLUS 750 Watt Mono Amplifier, and a Wavtech linkRC - Remote level control (RLC) for linkDQ.

1x Wavtech Link700.4plus 700 Watt 4-Channel Amplifier - (LINK700.4PLUS)

The Wāvtech mini series amplifiers pack an incredible amount of power and features into an extremely small package. Still, with a width of only 4.5”, there are some limitations. That is where the plus series comes in. While still incredibly small at just 5.5” wide, that extra 1” opens up some interesting possibilities.

Introducing the link700.4plus
The link700.4plus is the most versatile 4-channel amplifier available. Like our mini series multi-channel amplifiers, the plus series models have built-in summing. But with the additional width, we can now accommodate 6-channels of input. That means you can sum a 3-way OEM system and get front and rear full-range output, plus an RCA Pre-Out for a subwoofer amplifier. It is powerful, producing 100 watts x 4 RMS @ 4 ohms, or 175 watts RMS x 4 @ 2 ohms. In BTL mode the power is 350 watts x 2 RMS @ 4 ohms.

The link700.4plus has our bassFREQ processor, with 24 dB/octave lowpass and subsonic filters, as well as a fully adjustable 1-band parametric EQ. The optional RLC can be configured to control channels 3/4 when in lowpass mode, or the RCA Pre-Out.

link700.4plus Features
700 Watt 4-Channel Amplifier
100 watts x 4 @ 4 ohms
175 watts x 4 @ 2 ohms
350 watts x 2 @ 4 ohms BTL

Small Footprint: 10.25”x5.5”x1.65”
Variable HP Crossover (-12dB/oct) with 1x/10x CH1/2
Variable HP/BP/LP Crossover (-12dB/oct) CH3/4
Variable LP Crossover (-24dB/oct) RCA Pre-Out
Variable Subsonic Filter (-24dB/oct) RCA Pre-Out
Adjustable Parametric EQ RCA Pre-Out
Remote Level Control (RLC) w/Optional linkRC (Channels 3/4 or RCA Pre-Out)
bassFREQ Bass Processor w/Parametic EQ (CH 3/4 or Pre-Out)
Active Thermal Management
Start/Stop System Compatible
Adaptive OEM Load Technology
40V Input Capability
Differential Balanced Inputs
Variable Gain Adjustment w/Clip LED
Auto Turn-On via DC-Offset or Audio Signal Detect
Locking Detachable Hi-Level Speaker Terminals
Professional Grade Panel Mount RCA’s
Compact Aluminum Chassis w/Detachable Mounting tabs

1x Wavtech LINK750.1PLUS 750 Watt Mono Amplifier - (Link750.1plus)

If your system requires a 1 ohm stable amplifier, but doesn’t need the power of link1500.1plus, the link750.1plus is the solution. Utilizing our proprietary Dual Rail Voltage Power Supply, the amp produces the same power output at either 2 or 1 ohm. During installation, select the impedance that matches your subwoofers using the 4/2 or 1 ohm switch and the amp does the rest.

The link750.1plus can handle up to 40V and has our adaptive loading technology for OEM systems. It is also compatible with OEM start/stop systems. The bassFREQ preamp has a 24dB per octave crossover, adjustable parametric EQ and 24dB per octave subsonic filter for the best subwoofer tuning possible. It is compatible with the optional linkRC remote control.

link750.1plus Features
750 Watt Mono Amplifier
400 watts x 1 @ 4 ohms
750 watts x 1 @ 2 ohms
750 watts x 1 @ 1 ohm

Small Footprint Only 10.25”x5.5”x1.65”
Dual Rail Voltage Power Supply
Fully Adjustable Parametric EQ
Variable Low-Pass Crossover (-24dB/oct)
Variable Subsonic Filter (-24dB/oct)
Remote Level Control (RLC) w/Optional linkRC
bassFREQ Bass Processor w/Parametic EQ
Active Thermal Management
Start/Stop System Compatible
Adaptive OEM Load Technology
40V Input Capability
Differential Balanced Inputs
Variable Gain Adjustment w/Clip LED
Auto Turn-On via DC-Offset or Audio Signal Detect
Locking Detachable Hi-Level Speaker Terminals
4 Gauge Power/Ground Terminals
Professional Grade Panel Mount RCA’s
Compact Aluminum Chassis w/Detachable Mounting tabs

link750.1plus Specifications
Input Sensitivity
SPK: 1-20Vrms, 2-40Vrms
RCA: 0.2V-5Vrms, 0.4V-10Vrms

Max Input Voltage (SPK): 40Vrms
Frequency Response: <10Hz to >500Hz (=0/-3dB)
THD+N: <1% at rated power
S/N: >78dBA (1W, 4Ω)

1x Wavtech linkRC - Remote level control (RLC) for linkDQ - (linkRC)

Remote level control (RLC) for linkDQ

Wired Remote Control -
• Using the LinkRC you can easily adjust the output level of select wavtech line output converters, line drivers, and signal processors.

Mounting Options -
• Standard Installation: The remote mounts using two screws, typically to the underside of the dash.
• Custom Installation: The remote's housing is disassembled and the knob is flush mounted through a custom hole in the dash or console.