Description
Included in this kit
This bundle includes a Wavtech THINPRO10-2 10” Professional Series Shallow 2 Ohm Subwoofer, and a Wavtech LINK750.1PLUS 750 Watt Mono Amplifier.
1x Wavtech THINPRO10-2 10” Professional Series Shallow 2 Ohm Subwoofer - (Thinpro10-2)
The thinPRO10 is the ultimate paradox. There really isn’t anything else like it. With a mounting depth of less than 3”, if it won’t fit in the desired location, you probably aren’t putting a subwoofer there. The dual mirrored NBR spiders and axial force transfer assembly allows for unparalleled performance in a multitude of applications.
The FEA optimized dual gap motor structure features a massive motor with double stacked strontium magnets. This maximizes flux density and control for an impressive 20mm of linear xmax. The honeycomb cone is made of a composite Nomex® and glass fiber, making it incredibly rigid and very lightweight. The 4.5” voice coil, available in 2 or 4 ohm, provides a powerful moving force with 750W RMS power handling.
The thinPRO10 is perfect in both small sealed and ported enclosures. Sealed box sizes range from 0.25-0.8cu ft, with the sweet spot at 0.35cu ft. Ported enclosures range from 0.4-1.0cu ft, with 0.6cu ft recommended for optimum performance.
thinPRO10 Features
750 Watts RMS Power Handling
2.9” Mounting Depth
4.5” Voice Coil
4-Layer Winding on Vented Polymide Composite Former
Protective Grille (TP10G Sold Separately)
Honeycomb Nomex® and Glass Fiber Cone
FEA Optimized Dual-Gap Motor Structure
Double-Roll NBR Surround
Mirrored Internal NBR Spiders
8AWG Push Terminals
Vented Cast Aluminum Frame
Dimensions: 9 1/8in (232mm) Standard 10” cutout
Specifications:
General Specifications:
Nominal Size: 10"
Nominal Impedance: 2 ohm
Power Handling: 750W RMS, 2250W Peak
Recommended Power range: 250W-750W RMS
Frequency Response:
Electro-Mechanical Parameters:
Fs: 31hz
Vas: 17L (0.6ft^3)
Re: 1.95 Ohms
Le: 3.04 mH
Qms: 4.86
Qes: 0.62
Qts: 0.55
SPL: 81 dB
Sd: 341.76 cm^2 (52.97in^2)
Xmax: 20 mm (0.79")
Xmechp-p: 54 mm (2.13")
1x Wavtech LINK750.1PLUS 750 Watt Mono Amplifier - (Link750.1plus)
If your system requires a 1 ohm stable amplifier, but doesn’t need the power of link1500.1plus, the link750.1plus is the solution. Utilizing our proprietary Dual Rail Voltage Power Supply, the amp produces the same power output at either 2 or 1 ohm. During installation, select the impedance that matches your subwoofers using the 4/2 or 1 ohm switch and the amp does the rest.
The link750.1plus can handle up to 40V and has our adaptive loading technology for OEM systems. It is also compatible with OEM start/stop systems. The bassFREQ preamp has a 24dB per octave crossover, adjustable parametric EQ and 24dB per octave subsonic filter for the best subwoofer tuning possible. It is compatible with the optional linkRC remote control.
link750.1plus Features
750 Watt Mono Amplifier
400 watts x 1 @ 4 ohms
750 watts x 1 @ 2 ohms
750 watts x 1 @ 1 ohm
Small Footprint Only 10.25”x5.5”x1.65”
Dual Rail Voltage Power Supply
Fully Adjustable Parametric EQ
Variable Low-Pass Crossover (-24dB/oct)
Variable Subsonic Filter (-24dB/oct)
Remote Level Control (RLC) w/Optional linkRC
bassFREQ Bass Processor w/Parametic EQ
Active Thermal Management
Start/Stop System Compatible
Adaptive OEM Load Technology
40V Input Capability
Differential Balanced Inputs
Variable Gain Adjustment w/Clip LED
Auto Turn-On via DC-Offset or Audio Signal Detect
Locking Detachable Hi-Level Speaker Terminals
4 Gauge Power/Ground Terminals
Professional Grade Panel Mount RCA’s
Compact Aluminum Chassis w/Detachable Mounting tabs
link750.1plus Specifications
Input Sensitivity
SPK: 1-20Vrms, 2-40Vrms
RCA: 0.2V-5Vrms, 0.4V-10Vrms
Max Input Voltage (SPK): 40Vrms
Frequency Response: <10Hz to >500Hz (=0/-3dB)
THD+N: <1% at rated power
S/N: >78dBA (1W, 4Ω)