null
CreativeCare

Kenwood REFURBISHED X302-4 eXcelon 600W Max Class D 4/3/2 HPF/LPF Channel Amplifier

Shop All: Kenwood

No reviews yet Write a Review
SKU:
X302-4-REF
Condition:
Refurbished
$350.00
$149.00
You save $201.00
$350.00
$149.00
You save $201.00

Description

Kenwood's Excelon X302-4 four-channel amplifier delivers 50 watts RMS per channel, yet still fits almost anywhere in your vehicle. Switch this amp over to bridged, 2-channel mode, and you can power a pair of high-performance speakers or subs with 150 watts RMS each. In 3-channel mode, you can use the amp's front channels to drive a pair of speakers with 50 watts each, and bridge the rear channels to send 150 watts to a sub. This versatility pays off as your system evolves over time.

Features -
• Max Power 600W
• Size (inch) (W) 8-3/8" x (H) 2-1/16" x (D) 5-7/8"
• Variable High & Low Pass Filter
• Bass Boost
• RMS Power Output (4 Ohms): 50W x 4
• RMS Power Output (2 Ohms): 75W x 4
• Rms Power Output Bridged: 150W x 2 (Bridged)
• Speak Level Input
• Signal Sensing Turn-On
Specifications -
• Signal to Noise Ratio: 100dB (Reference: Rated Power into 4Ohms at 14.4V)
• Frequency Response: 20Hz-50kHz (+0dB, -3dB)
• Input Impedance: 10k ohm
• RCA Input Sensitivity: 0.2[V] - 5.0 [V]
• Speaker Level Input Sensitivity: 4.0[V] - 12.0 [V]

Refurbished FAQ

Refurbished Frequently Asked Questions

  • What does refurbished mean? Refurbished products may be unused customer returns that are essentially "new" items, or they may be defective products that were returned under warranty, and resold by the manufacturer after repairing the defects and ensuring proper function.
  • What is the warranty? All of our manufacturer refurbished items come with a 90-day warranty. Compared to the new products we carry generally having a 1-year or longer warranty. (JL Audio Amps are 2-years, and all of Wet Sounds carries a 2-year warranty when new)
  • What's it look like? A lot of the manufacturer refurbished products we sell generally look very good, and sometimes you can't even tell. However, these products can have some wear and tare on them, and we generally rate them an 8/10 cosmetically, and perfect 10/10 functionally.
  • What was wrong with it? We aren't told what is wrong with each and every product. Like stated above, they could have just been a return or they may have had an issue. Regardless, they are all combed over by their respective manufacturer to function as new before being shipped to us.
  • Have more questions? Call us, send us a chat, or an email. We'll be able to answer any additional questions you may have.

Extra Information

Brand:
Kenwood
Weight:
3.50 LBS
RMS Power In Watts:
300
UPC:
019048226242
Bundle:
No
Feature 1:
The 4-channel amplifier is effectively two 2-channel amps (A and B) built into one chassis. Both the A and B channels are bridgeable, so it can be wired as 4-channel, 3-channel, or 2-channel.
Feature 2:
The amplifier design is Class D, which uses digital switching power supplies. The result is the amplifier runs more efficiently, generating less heat than Class AB amps.
Feature 3:
The amplifier has a signal-sensing turn-on circuit on the speaker level input. When a signal (up to 50 watts) is detected on the speaker level inputs, the amplifier will automatically power on.
Feature 4:
The Input Sensitivity controls let you match the amplifier input to the preamp output level of the source unit.
Feature 5:
The Bass Boost increases the bass signal of the B channels, centered at 40Hz. The rotary control lets you adjust the boost between 0dB and 18 dB.
Condition:
REFURBISHED
Weight:
3.5000 lbs
ASIN:
B0G1XQLSVR
Shipping:
Free 2-Day Shipping!
CreativeCare:
Includes CreativeCare one year extended warranty!

Warranty Information

Kenwood

Check Fitment for Your Vehicle
Use our Fit Guide to verify compatibility in seconds.