Description
The XL series was developed for the growing Power Sports market including UTV and Marine applications, where electronics must withstand harsh damp environments. The circuit boards have been conformal coated with a layer of transparent material that protects the parts against moisture, dust and extreme temperatures.
While the harsh environments can leave electronics in situations that water and extreme dust is a factor, the new XL-MX series amplifiers have been designed to remain completely sealed with an IPX67 Water Resistance Rating ensuring your amplifier stays dry even when your ride leaves you all wet.
Features:
IPX67 Water Resistant Sealed Design
Aluminum Die-Cast end caps with integrated connectors
800 Watt High Efficiency Class D Design
1-OHM Stable Mono Block Amplifier
International Rectifier® Chip Set
Ultra Low Current Draw
4-Layer Copper Plated PCB
Conformal Coated PC Board
PWM MOSFET Power Supply
Digital Sound Optimization Circuitry
High Damping Control Circuit
High Current Voltage Ripple Rejection Circuitry
3.5mm AUX Input
Remote Soft Delay Turn On/Off Circuit
Variable Low Pass Electronic Crossover
Variable 18dB Bass Boost EQ
Variable Gain Control
Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output. Remote Gain Control Included
Specifications
Peak Power: 1600 watts
Subwoofer Frequency Range: 10 Hz - 300Hz
Power Supply: Unregulated PWM
Inputs: RCA (speaker level compatible)/3.5mm Mini Jack Input
Dimensions (in Inches): 10" x 4.6" x 1.8"
Depth: 10"
Channels (mono): 1
4-ohm Power: 350 watts
2-ohm Power: 500 watts
1-ohm Mono Power: 800 watts
Selectable Subwoofer EQ: 0-18d B Gain @ 45Hz
Variable Subsonic Freq: YES
Equalization Boost/Cut: 0 - 18 dB
Height: 1.8"
Width: 4.6"
Subwoofer EQ Frequency: 45 Hz
Low-Pass Crossover Freq: 40 Hz - 300 Hz
Crossover Slope: 12 dB
Input Sensitivity: 0.25 V - 10.0 V
S/N Ratio: >85 dB
Total Harmonic Distortion: 0.04% at Rated Power
Strapped Output Power @ 2ohms: N/A
Output Power (14.4 V) @ 4 ohm: 350 watts
Output Power (14.4 V) @ 2 ohm: 500 watts
Output Power (14.4 V) @ 1 ohm: 800 watts
Frequency Response: 10 Hz - 300 Hz
While the harsh environments can leave electronics in situations that water and extreme dust is a factor, the new XL-MX series amplifiers have been designed to remain completely sealed with an IPX67 Water Resistance Rating ensuring your amplifier stays dry even when your ride leaves you all wet.
Features:
IPX67 Water Resistant Sealed Design
Aluminum Die-Cast end caps with integrated connectors
800 Watt High Efficiency Class D Design
1-OHM Stable Mono Block Amplifier
International Rectifier® Chip Set
Ultra Low Current Draw
4-Layer Copper Plated PCB
Conformal Coated PC Board
PWM MOSFET Power Supply
Digital Sound Optimization Circuitry
High Damping Control Circuit
High Current Voltage Ripple Rejection Circuitry
3.5mm AUX Input
Remote Soft Delay Turn On/Off Circuit
Variable Low Pass Electronic Crossover
Variable 18dB Bass Boost EQ
Variable Gain Control
Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output. Remote Gain Control Included
Specifications
Peak Power: 1600 watts
Subwoofer Frequency Range: 10 Hz - 300Hz
Power Supply: Unregulated PWM
Inputs: RCA (speaker level compatible)/3.5mm Mini Jack Input
Dimensions (in Inches): 10" x 4.6" x 1.8"
Depth: 10"
Channels (mono): 1
4-ohm Power: 350 watts
2-ohm Power: 500 watts
1-ohm Mono Power: 800 watts
Selectable Subwoofer EQ: 0-18d B Gain @ 45Hz
Variable Subsonic Freq: YES
Equalization Boost/Cut: 0 - 18 dB
Height: 1.8"
Width: 4.6"
Subwoofer EQ Frequency: 45 Hz
Low-Pass Crossover Freq: 40 Hz - 300 Hz
Crossover Slope: 12 dB
Input Sensitivity: 0.25 V - 10.0 V
S/N Ratio: >85 dB
Total Harmonic Distortion: 0.04% at Rated Power
Strapped Output Power @ 2ohms: N/A
Output Power (14.4 V) @ 4 ohm: 350 watts
Output Power (14.4 V) @ 2 ohm: 500 watts
Output Power (14.4 V) @ 1 ohm: 800 watts
Frequency Response: 10 Hz - 300 Hz