Description
Bring on the waves! The KICKER® KM 12-inch Marine Subwoofer makes serious bass in a sealed or ported enclosure. Engineered to take the power and the weather, this sub is custom made to thump in your boat.
Completely weather-resistant, these marine subs are real-world tested for salt/fog and UV exposure, meeting or exceeding ASTM standards for marine durability.
A completely sealed motor structure and locking/sealed terminal cover make it splash-proof for long life, while a tough Santoprene® surround and marine-grade polypropylene cone pump out the bass, no matter how long or loud the party lasts.
Packed with features and made for marine, KICKER gives you the deep, loud bass your boat needs with the KM Series of subs. Put it in a sealed or vented enclosure, and you’ve got some fun times ahead!
FEATURES
Four-Ohm Voice Coil
Injection-Molded Polypropylene Cone
Co-molded Santoprene® Surround
UniPlate™ Back Plate And Pole Piece
Thick Tinsel Leads
Large Ceramic Magnet
Rear Gasketing Included
Polymer Basket Resists Corrosion
Protective Terminal Cap
Stainless Mounting Hardware Included
Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure
Specifications
Woofer(in,mm)
12, 30
Impedance (OHMS)
4 SVC
Peak Power Handling(Watts)
350
Continuous Power Handling(Watts RMS)
175
Sealed Enclosure Volume Min-Max(ft³, L)
1.25-3.5, 25.4-99.1
Vented Enclosure Volume Min-Max(ft³, L)
1.75-2.25, 49.6-63.7
Frequency Response(Hz)
30-500
Mounting Depth(in, cm)
5.5, 13.9
Hole Diameter(in, cm)
11, 27.9
Outer Diameter(in, cm)
13, 32.95
What's in the Box:
1 - 12" Woofer
1 - Back gasket
8 - Mounting screws
8 - Mounting screw clips
1 - Manual
Due to continual developement, product, and specifications are subject to change without notice. Stillwater Designs and it's agents are not responsible for typographical errors.
Completely weather-resistant, these marine subs are real-world tested for salt/fog and UV exposure, meeting or exceeding ASTM standards for marine durability.
A completely sealed motor structure and locking/sealed terminal cover make it splash-proof for long life, while a tough Santoprene® surround and marine-grade polypropylene cone pump out the bass, no matter how long or loud the party lasts.
Packed with features and made for marine, KICKER gives you the deep, loud bass your boat needs with the KM Series of subs. Put it in a sealed or vented enclosure, and you’ve got some fun times ahead!
FEATURES
Four-Ohm Voice Coil
Injection-Molded Polypropylene Cone
Co-molded Santoprene® Surround
UniPlate™ Back Plate And Pole Piece
Thick Tinsel Leads
Large Ceramic Magnet
Rear Gasketing Included
Polymer Basket Resists Corrosion
Protective Terminal Cap
Stainless Mounting Hardware Included
Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure
Specifications
Woofer(in,mm)
12, 30
Impedance (OHMS)
4 SVC
Peak Power Handling(Watts)
350
Continuous Power Handling(Watts RMS)
175
Sealed Enclosure Volume Min-Max(ft³, L)
1.25-3.5, 25.4-99.1
Vented Enclosure Volume Min-Max(ft³, L)
1.75-2.25, 49.6-63.7
Frequency Response(Hz)
30-500
Mounting Depth(in, cm)
5.5, 13.9
Hole Diameter(in, cm)
11, 27.9
Outer Diameter(in, cm)
13, 32.95
What's in the Box:
1 - 12" Woofer
1 - Back gasket
8 - Mounting screws
8 - Mounting screw clips
1 - Manual
Due to continual developement, product, and specifications are subject to change without notice. Stillwater Designs and it's agents are not responsible for typographical errors.
