Description
The KICKER® KMF 12-inch Marine Subwoofer makes serious bass without a dedicated enclosure! Made to take the power and the weather, this sub is custom made to bring the bass on your boat.
Completely weather-resistant, these marine subs are real-world tested for salt/fog and UV exposure, meeting or exceeding ASTM standards for marine durability.
A completely sealed motor structure and locking/sealed terminal cover make it splash-proof for long life, while a tough Santoprene® surround and marine-grade polypropylene cone pump out the bass, no matter how long or loud the party lasts.
Packed with features and made for marine, KICKER gives you the deep, loud bass your boat needs with the KM Series of subs.
FEATURES
Four-Ohm Voice Coil
Injection-Molded Polypropylene Cone
Co-molded Santoprene® Surround
UniPlate™ Back Plate And Pole Piece
Thick Tinsel Leads
Large Ceramic Magnet
Rear Gasketing Included
Polymer Basket Resists Corrosion
Protective Terminal Cap
Stainless Mounting Hardware Included
Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure
Specifications
Woofer(in,mm)
12, 30
Impedance (OHMS)
4 SVC
Peak Power Handling(Watts)
350
Continuous Power Handling(Watts RMS)
175
Sealed Enclosure Volume Min-Max(ft³, L)
1.25-3.5, 25.4-99.1
Vented Enclosure Volume Min-Max(ft³, L)
1.75-2.25, 49.6-63.7
Frequency Response(Hz)
30-500
Mounting Depth(in, cm)
5.5, 13.9
Hole Diameter(in, cm)
11, 27.9
Outer Diameter(in, cm)
13, 32.95
What's in the Box:
1 - 12" Woofer
1 - Back gasket
8 - Mounting screws
8 - Mounting screw clips
1 - Manual
Completely weather-resistant, these marine subs are real-world tested for salt/fog and UV exposure, meeting or exceeding ASTM standards for marine durability.
A completely sealed motor structure and locking/sealed terminal cover make it splash-proof for long life, while a tough Santoprene® surround and marine-grade polypropylene cone pump out the bass, no matter how long or loud the party lasts.
Packed with features and made for marine, KICKER gives you the deep, loud bass your boat needs with the KM Series of subs.
FEATURES
Four-Ohm Voice Coil
Injection-Molded Polypropylene Cone
Co-molded Santoprene® Surround
UniPlate™ Back Plate And Pole Piece
Thick Tinsel Leads
Large Ceramic Magnet
Rear Gasketing Included
Polymer Basket Resists Corrosion
Protective Terminal Cap
Stainless Mounting Hardware Included
Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure
Specifications
Woofer(in,mm)
12, 30
Impedance (OHMS)
4 SVC
Peak Power Handling(Watts)
350
Continuous Power Handling(Watts RMS)
175
Sealed Enclosure Volume Min-Max(ft³, L)
1.25-3.5, 25.4-99.1
Vented Enclosure Volume Min-Max(ft³, L)
1.75-2.25, 49.6-63.7
Frequency Response(Hz)
30-500
Mounting Depth(in, cm)
5.5, 13.9
Hole Diameter(in, cm)
11, 27.9
Outer Diameter(in, cm)
13, 32.95
What's in the Box:
1 - 12" Woofer
1 - Back gasket
8 - Mounting screws
8 - Mounting screw clips
1 - Manual
