Description
13W7AE-D1.5
10th Anniversary Edition - W7 13.5-inch Subwoofer Driver (1500 W, Dual 1.5 Ω voice coils)
Words like "extreme," "reference" and "ultimate" get thrown around quite a bit in the subwoofer driver world, but rare is the product that can honestly lay claim to them. The 13W7AE does.
Taking the W7 design formula to its highest level, the 13W7AE offers a staggering linear excursion envelope that exceeds 1.25 inches (32 mm) one-way, along with a suspension capable of over 4-inches of peak-to-peak excursion. Combine that with a piston diameter that is 28% larger than the 12W7AE's, and you have a serious high-performance driver for the most demanding applications. With a 13W7AE, limits simply vanish and amazing sub-bass happens... on all fronts, at any level.
Our most potent subwoofer driver is best used with amplifier power in the 500W - 1500W range and is optimized to operate in a 1.875 cu. ft. (53.1 l) sealed enclosure, or a 2.375 cu. ft. (67.3 l) ported enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab.
W7AE (Anniversary Edition) Subwoofers celebrate the 10th Anniversary of the launch of the W7 subwoofers. Functionally, they are identical to the original W7's, but are they distinguished by the following cosmetic differences:
- Satin-Black Powdercoated Baskets
- Bright Anodized Surround Clamp Ring
- Anniversary Edition Cone Badge
- Anniversary Edition Terminal Label
General Specifications
| Continuous Power Handling (RMS) | 1500 W |
| Recommended Amplifier Power (RMS) | 500 - 1500 W |
| Nominal Impedance (Znom) | Dual 1.5 Ω |
Physical Specifications
| Nominal Diameter | 13.5 in / 345 mm |
| Overall Diameter (A) | 14 in / 356 mm |
| Mounting Hole Diameter (B) | 11.9 in / 302 mm |
| Bolt Hole Circle Diameter (C) | 12.7 in / 323 mm |
| Motor Outer Diameter (D) | 8.38 in / 213 mm |
| Mounting Depth (E) | 10.5 in / 267 mm |
| Driver Displacement | 0.21 cu ft / 5.9 L |
| Net Weight | 52 lb / 23.6 kg |
Parameters
| Free Air Resonance (Fs) | 23.5 Hz |
| Electrical “Q” (Qes) | 0.476 |
| Mechanical “Q” (Qms) | 7.517 |
| Total Speaker “Q” (Qts) | 0.448 |
| Equivalent Compliance (Vas) | 3.68 cu ft / 104.3 L |
| One-Way Linear Excursion (Xmax)* | 1.25 in / 32 mm |
| Reference Efficiency (no) | 0.27% |
| Efficiency (1 W / 1 m)** | 86.3 dB SPL |
| Effective Piston Area (Sd) | 107.35 sq in / 0.0693 sq m |
| DC Resistance (Re)*** | 2.41 Ω |
* Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied.
** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is “louder”.
Sealed Enclosure Specifications
| Wall Thickness | 0.75 in / 19 mm |
| Front Baffle Thickness | 1.0 in / 25 mm |
| Volume (net int.) | 1.875 cu ft / 53.1 L |
| External Width (W) | 16 in / 407 mm |
| External Height (H) | 16 in / 407 mm |
| External Depth (D) | 18.875 in / 479 mm |
| F3 | 40.5 Hz |
| Fc | 37.4 Hz |
| Qtc | 0.771 |
Enclosure Notes
Net volumes given above do not include the air volume displaced by the speaker (Driver Displacement). This value must be added to the net volume along with the displacement of any braces and/or ports (if applicable) to arrive at a gross internal volume. Air inside a port is not part of the effective net volume. Calculate ports as solid, not hollow objects.
* The W7’s employ a pole vent to remove heat and pressure from the inside of the speaker.This vent is located at the rear of the speaker. A minimum distance of 0.75 in (19 mm) is required between the back of the speaker and any wall of the enclosure to allow proper operation of the pole vent.
The dimensions given for the enclosure examples above take all applicable displacements into consideration
Safety Notice
It is absolutely essential that the completed subwoofer enclosure is mounted firmly to the vehicle with heavy steel bolts (0.5 in diameter) and large steel washers on both sides of the bolts. This will reduce the likelihood of occupant injury in the event of a collision or sudden deceleration.
Ported Enclosure Specifications
| Wall Thickness | 0.75 in / 19 mm |
| Front Baffle Thickness | 1.0 in / 25 mm |
| Volume (net int.) | 2.375 cu ft / 67.3 L |
| External Width (W) | 25.875 in / 657 mm |
| External Height (H) | 16 in / 406 mm |
| External Depth (D) | 17.25 in / 438 mm |
| Internal Slot Port Width (SW) | 2.25 in / 57 mm |
| Internal Slot Port Height (SH) | 14.5 in / 368 mm |
| Internal Slot Port Length (SL) | 26.25 in / 667 mm |
| Port Extension Length (EL) | 7.875 in / 200 mm |
| Tuning Frequency (Fb) | 34.6 Hz |
| F3 | 30.3 Hz |
Enclosure Notes
Net volumes given above do not include the air volume displaced by the speaker (Driver Displacement). This value must be added to the net volume along with the displacement of any braces and/or ports (if applicable) to arrive at a gross internal volume. Air inside a port is not part of the effective net volume. Calculate ports as solid, not hollow objects.
* The W7’s employ a pole vent to remove heat and pressure from the inside of the speaker.This vent is located at the rear of the speaker. A minimum distance of 0.75 in (19 mm) is required between the back of the speaker and any wall of the enclosure to allow proper operation of the pole vent.
The dimensions given for the enclosure examples above take all applicable displacements into consideration
Safety Notice
It is absolutely essential that the completed subwoofer enclosure is mounted firmly to the vehicle with heavy steel bolts (0.5 in diameter) and large steel washers on both sides of the bolts. This will reduce the likelihood of occupant injury in the event of a collision or sudden deceleration.
Used Frequently Asked Questions
- What does used mean? Used products may be unused customer returns that are essentially "new" items, or they may be previously installed products that were returned under warranty or during our return policy period.
- What is the warranty? All of our used items come with a 90-day warranty.
- What's it look like? All of our used items are inspected and graded by our returns team at our facilities. They will test them and grade them to one of four standard gradings: Used Open Box, Used Very Good, Used Good, and Used Acceptable. Please see the following descriptions of each grade - also note that if an item falls under ANY of the criteria for a certain grade, even though the rest of the product is better, we will give it the lowest grade.
- Used Open Box An item in perfect working condition. Original protective wrapping may be missing, but the original packaging is intact and in good condition with minor damage possible. Instructions are included.
- Used Very Good A well-cared-for item with limited use, remains in good working condition. The item may show some limited signs of wear,small scratches,cosmetic blemishes. Item may arrive with damaged packaging or be repackaged and could be missing some accessories.
- Used Good The item shows wear from use, remains in good condition and functions properly. May have damaged packaging or be repackaged. It may be marked, have identifying markings on it, have minor cosmetic damage. It may be missing some parts or accessories.
- Used Acceptable The item is fairly worn but continues to function properly. While repackaged; signs of wear can include aesthetic issues; scratches, dents. The item may have markings on it or show signs of previous use. Item may be missing some parts or accessories.
- Have more questions? Call us, send us a chat, or an email. We'll be able to answer any additional questions you may have.