Description
Included in this kit
This bundle includes a Cicada Audio HDPro4K - 4-Channel CX/DSP Wiring Harness Kit with 8 AWG/PWR Wire, a Cicada Audio CHDLID - H-D 2014-2023 LID KIT/NO Speakers - PR, a Cicada Audio CX65.2 - Coaxial Speakers 6.5-inch - 2 Ohm, Pair, a Cicada Audio CHDRGG - H-D 2014-2023 RG Kidney Grill - PR, a Cicada Audio CHDSGG - H-D 2014-2023 SG Round Grill, Pair, a Cicada Audio 14HDAR-RG - CX/DSP/FLX Amplifier Mounting System H-D® Road Glide ®, a Cicada Audio 14HDAR-SG - CX/DSP/FLX Amplifier Mounting System H-D® Street Glide ®, a Cicada Audio CX600.4D - 4 X 150 @ 2 Ohm, and a Cicada Audio CX69.2 - Coaxial Speakers 6x9-inch - 2 Ohm, Pair.
1x Cicada Audio HDPro4K - 4-Channel CX/DSP Wiring Harness Kit with 8 AWG/PWR Wire - (HDPro4K)
HDPro4K Cicada Amplifier Plug-N-Play Harness Kit includes:
HDFIM Front input harness with 47-ohm resistors – Molex
HDRIM Rear input harness with 47-ohm resistors – Molex
HDFOM Front output harness – Molex
HDROM Rear output harness w/ 6 FT extension – Molex
HDPG8K 8-Gauge Power/Ground Kit
1x Cicada Audio CHDLID - H-D 2014-2023 LID KIT/NO Speakers - PR - (CHDLID)
Allows for the use of CH69 (Cast Frames) and CX69 (Plastic Frames) mounted into the factory Harley Davidson® bag lids.
Black finish allows for matching to any color bike. No need for additional color match painting.
1x Cicada Audio CX65.2 - Coaxial Speakers 6.5-inch - 2 Ohm, Pair - (CX65.2)
• 100W RMS/200 MAX Power Handling
• Neodymium High Energy/ Light Weight N35 Magnet structure
• WaterProof IMPP Cone with NBR surrounds
• Heavy Duty/ Injected High Temp Polymer Frame.
• 1.4” 2 Ohm – High Temp Voice Coil (Black Coat™) Voice Coil MidBass
• 1.0” PEI dome tweeter with Neodymium magnet
• DPSH® “Dual-Phase Slot Horn”
• Advanced Voice Coil Heat Sink Design for Better Heat Dissipation
• Frequency Response: 54Hz -20Khz+/-5dB
• High Sensitivity: 94dB 1W/1M Average (1W/1M - 2.83V)
• Built in 6dB Crossover
TECHNICAL SPECIFICATIONS
Component High Efficiency: CoAx Driver
Provided inline crossover Hi-pass filter @ 6 kHz - 6 dB Oct.
Size in. / mm: 6.5 (165)
Power Handling (EACH) W peak 200W - Hi-pass filtered @ 100Hz - 12 dB Oct
Impedance: 2 Ohm
Frequency Response Hz 65Hz-20k +/- 5dB
Sensitivity dB/SPL 94dB Average (1W/1M -2.83V)
Voice Coil Ø in. (mm): 1.4 (35.5)Mid / 1.0 (25) Tweeter
Magnet Neodymium N35H
Dome Aluminium
Weight of 1 Speaker lb. (kg): 2.1 (0.95)
ELECTRO-ACOUSTIC PARAMETERS - MIDBASS
D inches / mm 6.5 / 165
Re 2 Ohms
Fs Hz 70
Le mH @ 1 kHz 0,03
Vas I 8.95
Mms g 12.0
Cms mm/N 0.434
BL T m 6.09
Qts 0.363
Qes 0.387
Qms 6.017
Spl dB 94dB Average (1W/1M -2.83V)
1x Cicada Audio CHDRGG - H-D 2014-2023 RG Kidney Grill - PR - (CHDRGG)
Custom tooled Road Glide(R) replacement grill for increased height for CH/CM series speakers.
1x Cicada Audio CHDSGG - H-D 2014-2023 SG Round Grill, Pair - (CHDSGG)
Custom tooled Street Glide® replacement grills add additional depth required for aftermarket speaker upgrades.
1x Cicada Audio 14HDAR-RG - CX/DSP/FLX Amplifier Mounting System H-D® Road Glide ® - (14HDAR-RG)
Amplifier Mounting Rack for 2014-2023 H-D® Road Glide®
HASSLE-FREE INSTALLATION
Mount amp to stainless steel chassis and easily slide in under the fairing mounted radio.
NOTE: Place amplifier input side toward the driver, power and ground input toward the headlight!
Powder coated
Stainless steel construction
Mounting hardware included
Designed for CX/FLX/DSP600.4D style amplifiers only
1x Cicada Audio 14HDAR-SG - CX/DSP/FLX Amplifier Mounting System H-D® Street Glide ® - (14HDAR-SG)
Amplifier Mounting Rack for 2014-2023 H-D® Street Glide®
HASSLE-FREE INSTALLATION
Velcro® mount amp to stainless steel tray between the head unit and the headlight.
Powder coated
Stainless steel construction
Mounting hardware included
Designed for CX/FLX/DSP600.4D style amplifiers only
1x Cicada Audio CX600.4D - 4 X 150 @ 2 Ohm - (CX600.4D)
POWER SUPPLY
Voltage: 9 - 16 VDC
Idling current: 1.32 A
Switched off: <1 mA
Consumption @ 14.4 VDC 2Ω Max Musical Power: 51
Remote IN: 7 ÷ 15 VDC (1 mA)
Fuse: 30 A
DC Offset (Senses DC offset for Turn on/off): Speaker input - selectable
VOX (Signal Sensing Turn on/off): Speakers input - selectable
REM (Switched 12V on/off): Switched 12V turns the amplifier on
AMPLIFIER STAGE
Distortion - THD @ 1 kHz, 4 Ω, 90% Output Power: 0.10 %
Bandwidth @ -3 dB, 2 V RMS, 4Ω: 10 ÷ 20k Hz
S/N ratio @ A weighted, 2V, Output Power: 91 dBA
Damping factor @ 1 kHz, 2 V RMS, 4Ω: >200
Input sensitivity: 0.2 - 12 V RMS
Input impedance: 15k Ω
LOAD IMPEDANCE (MIN):
• 4 Ch: 1-2-3-4 2Ω
• 2 Ch: Bridge (1-2) (3-4) 4Ω
MAX POWER 600 W
OUTPUT POWER (RMS) @ 12.5 VDC, 1% THD:
• 4 Ch @ 4Ω: 70 W x 4
• 4 Ch @ 2Ω: 115 W x 4
• 2 Ch - (Bridge 1/2; 3/4) @ 4 W 218 W x 2
OUTPUT POWER (RMS) @ 14.4 VDC, 10% THD:
• 4 Ch @ 4Ω: 92 W x 4
• 4 Ch @ 2Ω: 152 W x 4
• 2 Ch - (Bridge 1/2; 3/4) @ 4 W 302 W x 2
CEA SPECIFICATIONS
Output power @ 4Ω, ⩽1% THD+N, 14.4 V: 70 W x 4
SN ratio (ref. 1 W output): 75 dBA
SIGNAL CONNECTIONS
Input Stage: 6 channels in High and Low Input, 4 channels / 2 Preouts
DIGITAL SIGNAL PROCESSOR
(32 bit Cirrus Logic; Clock speed: 147 MHz)
Crossover: Full / Hi Pass / Lo Pass / Band Pass
Crossover type and slope: Linkwitz @ 12/18/24/48 dB
Crossover Frequency: 68 steps @ 20 ÷ 20k Hz
Phase inversion: 0° / 180°
Digital Input Equalizer: (to correct HD curve) Audio PreSets
Output Equalizer, Parametrics Equalizers: ±12 dB; 10 pole; 20 - 20k Hz
Time Alignment Distance 0 ÷ 510 cm / 0 to 133.9 in.
Time Alignment Delay 340 to 10 ms
Time Alignment Step 0,08 ms; 2,8 cm / 1.1 in.
SYSTEM PRESETS:
Acoustic Preset 6 Harley Davidson Audio Presets/De EQ
1x Cicada Audio CX69.2 - Coaxial Speakers 6x9-inch - 2 Ohm, Pair - (CX69.2)
• 125WRMS/250 MAX Power Handling
• Neodymium High Energy/ Light Weight N35H Magnet structure
• WaterProof IMPP Cone with NBR surrounds
• Heavy Duty/ Injected High Temp Polymer Frame.
• 1.4” 2 Ohm – High Temp Voice Coil (Black Coat™) Voice Coil MidBass
• 1.0” PEI dome tweeter with Neodymium magnet
• DPSH® “Dual-Phase Slot Horn”
• Advanced Voice Coil Heat Sink Design for Better Heat Dissipation
• Frequency Response: 53.6Hz -20Khz+/-5dB
• High Sensitivity: 95.5dB (1W/1M - 2.83V)
• Built in 6dB Crossover
TECHNICAL SPECIFICATIONS
Component: High Efficiency CoAx Driver
Provided inline crossover Hi-pass filter @ 6 kHz - 6 dB Oct
Size in. / mm: 6 X 9 (163 X 234)
Power Handling W peak 250W - Hi-pass filtered** @ 100Hz - 12 dB Oct.
Impedance 2 Ohm
Frequency Response Hz: 45Hz-20k +/- 5dB
Sensitivity dB/SPL 95.5dB: (1W/1M -2.83V)
Voice Coil Ø in. (mm): 1.4 (35) Mid / 1.0 (25) Tweeter
Magnet: Neodymium N35H
Dome: PEI
Weight of 1 Speaker (kg) lb.: (1.04) 2.3
ELECTRO-ACOUSTIC PARAMETERS - MIDBASS
D inches / mm: 6 X 9 (163 X 234)
Re Ω: 2
Fs Hz: 53.6
Le mH: @ 1 kHz 0,03
Vas I: 25.89
Mms g: 22
Cms mm/N: 0.431
BL T• m: 6.371
Qts: 0.548
Qes: 0.609
Qms: 5.488
Spl dB: 95.5dB (1W/1M -2.83V)