Description
Included in this kit
This bundle includes a Cicada Audio DSP600.4D - DSP 4 X 150 @ 2 Ohm 600w 4 ch Amplifier, a Cicada Audio RR075T - 0.75-inch Titanium Shallow Horn, Pair, a Cicada Audio CHDRGGTK - H-D 2014-2023 RG Kidney Grill and RR075T Tweeter, Pair, a Cicada Audio CHDSGGT - H-D 2014-2023 SG Round Grill with cutout - PR, a Cicada Audio CM65.2X - 6.5-inch Mid-Bass Speakers - 2 Ohm, Pair, a Cicada Audio CM69.2X - Mid-Bass 6x9-inch - 2 Ohm, Pair, a Cicada Audio HDPro4K - 4-Channel CX/DSP Wiring Harness Kit with 8 AWG/PWR Wire, a Cicada Audio CHDLID - H-D 2014-2023 LID KIT/NO Speakers - PR, and a Cicada Audio CHD69TB - H-D 2014-2023 6x9-inch Tweeter Bridge, Pair.
1x Cicada Audio DSP600.4D - DSP 4 X 150 @ 2 Ohm 600w 4 ch Amplifier - (DSP600.4D)
POWER SUPPLY
Voltage: 9 - 16 VDC
Idling current: 1.32 A
Switched off: <1 mA
Consumption @ 14.4 VDC 2Ω Max Musical Power 51 A
Remote IN 7 ÷ 15 VDC (1 mA)
Fuse 30 A
DC Offset (Senses DC offset for Turn on/off) Speaker input - selectable
VOX (Signal Sensing Turn on/off) Speakers input - selectable
REM (Switched 12V on/off) Switched 12V turns the amplifier on
AMPLIFIER STAGE
Distortion - THD @ 1 kHz, 4 Ω, 90% Output Power: 0.10 %
Bandwidth @ -3 dB, 2 V RMS, 4Ω: 10 ÷ 20k Hz
S/N ratio @ A weighted, 2V, Output Power: 91 dBA
Damping factor @ 1 kHz, 2 V RMS, 4Ω: >200
Input sensitivity: 0.2 - 12 V RMS
Input impedance: 15k Ω
LOAD IMPEDANCE (MIN):
• 4 Ch: 1-2-3-4 2Ω
• 2 Ch: Bridge (1-2) (3-4) 4Ω
MAX POWER 600 W
OUTPUT POWER (RMS) @ 12.5 VDC, 1% THD:
• 4 Ch @ 4Ω: 70 W x 4
• 4 Ch @ 2Ω: 115 W x 4
• 2 Ch - (Bridge 1/2; 3/4) @ 4 W 218 W x 2
OUTPUT POWER (RMS) @ 14.4 VDC, 10% THD:
• 4 Ch @ 4Ω: 92 W x 4
• 4 Ch @ 2Ω: 152 W x 4
• 2 Ch - (Bridge 1/2; 3/4) @ 4 W 302 W x 2
CEA SPECIFICATIONS
Output power @ 4Ω, ⩽1% THD+N, 14.4 V: 70 W x 4
SN ratio (ref. 1 W output): 75 dBA
SIGNAL CONNECTIONS
Input Stage: 6 channels in High and Low Input, 4 channels / 2 Preouts
DIGITAL SIGNAL PROCESSOR
(32 bit Cirrus Logic; Clock speed: 147 MHz)
Crossover: Full / Hi Pass / Lo Pass / Band Pass
Crossover type and slope: Linkwitz @ 12/18/24/48 dB
Crossover Frequency: 68 steps @ 20 ÷ 20k Hz
Phase inversion: 0° / 180°
Digital Input Equalizer: (to correct HD curve) Audio PreSets
Output Equalizer: Parametrics Equalizers: ±12 dB; 10 pole; 20 - 20k Hz
Time Alignment Distance 0 ÷ 510 cm / 0 to 133.9 in.
Time Alignment Delay 340 to 10 ms
Time Alignment Step 0,08 ms; 2,8 cm / 1.1 in.
SYSTEM PRESETS:
Acoustic Preset 6 Harley Davidson Audio Presets/De EQ
GENERAL REQUIREMENTS
PC connections Type C
Software/PC requirements:
Microsoft Windows(r) (32/64 bit): XP, Vista, Windows 7, Windows 8
Graphic card min. resolution: 800 x 600
Ambient operating temperature range: -20 °C to 80 °C (-4°F to 176°F)
1x Cicada Audio RR075T - 0.75-inch Titanium Shallow Horn, Pair - (RR075T)
RR075T – 1” SHALLOW RING RADIATOR HORN TWEETER
50WRMS/100W MAX Power Handling- per tweeter
Neodymium High Energy/ Light Weight N35 Magnet structure
Heavy Duty/ Die-cast Aluminum Basket
4 Ohm for increased durability
1.0” Aluminum Diaphragm High-Temp Voice Coil for Tweeter
Advanced Voice Coil Heat Sink Design for Better Heat Dissipation
Frequency Response: 2KHz -20Khz+/-5dB
High Sensitivity: 100dB 1W/1M Average (1W/1M – 2.83V)
12dB -7kHz Crossover with custom tooled/ Vented crossover case
Mounting Depth: 1.13” / 28.9mm
Mounting Diameter: 2” / 50mm
SOLD ONLY IN PAIRS
1x Cicada Audio CHDRGGTK - H-D 2014-2023 RG Kidney Grill and RR075T Tweeter, Pair - (CHDRGGTK)
CHDRGGTK – HD ROAD GLIDE “KIDNEY” GRILL W/TWEETER
50 WRMS / 100W MAX Power Handling- per tweeter
Neodymium High Energy / Light Weight N35 Magnet structure
Heavy Duty / Die-cast Aluminum Basket
4 Ohm for increased durability
1.0” Aluminum Diaphragm High-Temp Voice Coil for Tweeter
Advanced Voice Coil Heat Sink Design for Better Heat Dissipation
Frequency Response: 2KHz -20Khz+/-5dB
High Sensitivity: 107dB 1W/1M Average (1W/1M – 2.83V)
12dB Crossover with custom tooled/ Vented crossover case
Custom Punched Road Glide Grills
Mounting Depth: 1.13” / 28.9mm
Mounting Diameter: 2” / 50mm
SOLD IN MATCHED PAIRS
1x Cicada Audio CHDSGGT - H-D 2014-2023 SG Round Grill with cutout - PR - (CHDSGGT)
H-D 2014-2023 SG Round Grill with cutout - PR
1x Cicada Audio CM65.2X - 6.5-inch Mid-Bass Speakers - 2 Ohm, Pair - (CM65.2X)
250WRMS/500 MAX Power Handling
Neodymium high energy/ light weight N35 magnet structure
Heavy duty/ die-cast Aluminum basket
2.0-inch 2Ω – High Temp (Black Coat™) Voice Coil
Shortening Ring for the ultimate in speaker control
Advanced Voice Coil Heat Sink Design for Better Heat Dissipation
Frequency Response: 75Hz -20Khz+/-5dB
High Sensitivity: 4dB / 93.2dB (1W/1M)
Total Diameter: 6.5-inch / 165mm
Mounting Depth: 3.0-inch / 76.2mm
Mounting Diameter: 5.7-inch / 145.5mm
1x Cicada Audio CM69.2X - Mid-Bass 6x9-inch - 2 Ohm, Pair - (CM69.2X)
FEATURES:
Rain or Shine™ all weather performance design
Available in 4- or 2-Ω versions
Carbon Matrix Composite™ (CMC™) cone
Lightweight / rigid / high temp
Maximized efficiency / super strong
Black coat™ 2-inch high conductivity, low resistance OFC copper wire mid-bass voice coil ensures extreme temperature thermal performance
OFC copper shorting ring for extended high frequency performance
N35SH Neodymium magnet
Die cast Aluminum custom tooled basket with Vortex Flow Venting™
Warranty: 2 years
SPECIFICATIONS:
2Ω – 6X9-inch mid-bass driver
Power handling: 250W RMS/500W MAX
Voice Coils: 2.0-inch/51mm mid-bass
Cone: Carbon Matrix Composite™
Magnet: Neodymium
Sensitivity: 94dB, 1W / 1M
response 70Hz – 20kHz +/- 3dB
Mounting Depth: 3.7-inch/94mm
Mounting Diameter: 5.7-inch/145mm X 8.5-inch/216mm
1x Cicada Audio HDPro4K - 4-Channel CX/DSP Wiring Harness Kit with 8 AWG/PWR Wire - (HDPro4K)
HDPro4K Cicada Amplifier Plug-N-Play Harness Kit includes:
HDFIM Front input harness with 47-ohm resistors – Molex
HDRIM Rear input harness with 47-ohm resistors – Molex
HDFOM Front output harness – Molex
HDROM Rear output harness w/ 6 FT extension – Molex
HDPG8K 8-Gauge Power/Ground Kit
1x Cicada Audio CHDLID - H-D 2014-2023 LID KIT/NO Speakers - PR - (CHDLID)
Allows for the use of CH69 (Cast Frames) and CX69 (Plastic Frames) mounted into the factory Harley Davidson® bag lids.
Black finish allows for matching to any color bike. No need for additional color match painting.
1x Cicada Audio CHD69TB - H-D 2014-2023 6x9-inch Tweeter Bridge, Pair - (CHD69TB)
Tweeter bridge for Cicada Audio 6x9" speakers