Cicada Audio 14DSPCXX-4X4 4 CH DSP Amp & 4 CXX Speaker System

Included in this kit

---

This bundle includes a Cicada Audio HDPro4K - 4-Channel CX/DSP Wiring Harness Kit with 8 AWG/PWR Wire, a Cicada Audio CHDRGG - H-D 2014-2023 RG Kidney Grill - PR, a Cicada Audio CHDSGG - H-D 2014-2023 SG Round Grill, Pair, a Cicada Audio CHDLID - H-D 2014-2023 LID KIT/NO Speakers - PR, a Cicada Audio 14HDAR-RG - CX/DSP/FLX Amplifier Mounting System H-D® Road Glide ®, a Cicada Audio 14HDAR-SG - CX/DSP/FLX Amplifier Mounting System H-D® Street Glide ®, a Cicada Audio DSP600.4D - DSP 4 X 150 @ 2 Ohm 600w 4 ch Amplifier, a Cicada Audio CXX65.2 - Pro Coaxial Speakers 6.5-inch- 2 Ohm, Pair, and a Cicada Audio CXX69.2 - Pro Coaxial Speakers 6x9-inch - 2 Ohm - 2-inch voice coil, Pair.

1x Cicada Audio HDPro4K - 4-Channel CX/DSP Wiring Harness Kit with 8 AWG/PWR Wire - (HDPro4K)

HDPro4K Cicada Amplifier Plug-N-Play Harness Kit includes:
HDFIM Front input harness with 47-ohm resistors – Molex
HDRIM Rear input harness with 47-ohm resistors – Molex
HDFOM Front output harness – Molex
HDROM Rear output harness w/ 6 FT extension – Molex
HDPG8K 8-Gauge Power/Ground Kit

1x Cicada Audio CHDRGG - H-D 2014-2023 RG Kidney Grill - PR - (CHDRGG)

Custom tooled Road Glide(R) replacement grill for increased height for CH/CM series speakers.

1x Cicada Audio CHDSGG - H-D 2014-2023 SG Round Grill, Pair - (CHDSGG)

Custom tooled Street Glide® replacement grills add additional depth required for aftermarket speaker upgrades.

1x Cicada Audio CHDLID - H-D 2014-2023 LID KIT/NO Speakers - PR - (CHDLID)

Allows for the use of CH69 (Cast Frames) and CX69 (Plastic Frames) mounted into the factory Harley Davidson® bag lids.

Black finish allows for matching to any color bike. No need for additional color match painting.

1x Cicada Audio 14HDAR-RG - CX/DSP/FLX Amplifier Mounting System H-D® Road Glide ® - (14HDAR-RG)

Amplifier Mounting Rack for 2014-2023 H-D® Road Glide®

HASSLE-FREE INSTALLATION
Mount amp to stainless steel chassis and easily slide in under the fairing mounted radio.

NOTE: Place amplifier input side toward the driver, power and ground input toward the headlight!

Powder coated
Stainless steel construction
Mounting hardware included
Designed for CX/FLX/DSP600.4D style amplifiers only

1x Cicada Audio 14HDAR-SG - CX/DSP/FLX Amplifier Mounting System H-D® Street Glide ® - (14HDAR-SG)

Amplifier Mounting Rack for 2014-2023 H-D® Street Glide®

HASSLE-FREE INSTALLATION
Velcro® mount amp to stainless steel tray between the head unit and the headlight.

Powder coated
Stainless steel construction
Mounting hardware included
Designed for CX/FLX/DSP600.4D style amplifiers only

1x Cicada Audio DSP600.4D - DSP 4 X 150 @ 2 Ohm 600w 4 ch Amplifier - (DSP600.4D)

POWER SUPPLY
Voltage: 9 - 16 VDC
Idling current: 1.32 A
Switched off: <1 mA
Consumption @ 14.4 VDC 2Ω Max Musical Power 51 A
Remote IN 7 ÷ 15 VDC (1 mA)
Fuse 30 A
DC Offset (Senses DC offset for Turn on/off) Speaker input - selectable
VOX (Signal Sensing Turn on/off) Speakers input - selectable
REM (Switched 12V on/off) Switched 12V turns the amplifier on

AMPLIFIER STAGE
Distortion - THD @ 1 kHz, 4 Ω, 90% Output Power: 0.10 %
Bandwidth @ -3 dB, 2 V RMS, 4Ω: 10 ÷ 20k Hz
S/N ratio @ A weighted, 2V, Output Power: 91 dBA
Damping factor @ 1 kHz, 2 V RMS, 4Ω: >200
Input sensitivity: 0.2 - 12 V RMS
Input impedance: 15k Ω
LOAD IMPEDANCE (MIN):
• 4 Ch: 1-2-3-4 2Ω
• 2 Ch: Bridge (1-2) (3-4) 4Ω
MAX POWER 600 W
OUTPUT POWER (RMS) @ 12.5 VDC, 1% THD:
• 4 Ch @ 4Ω: 70 W x 4
• 4 Ch @ 2Ω: 115 W x 4
• 2 Ch - (Bridge 1/2; 3/4) @ 4 W 218 W x 2
OUTPUT POWER (RMS) @ 14.4 VDC, 10% THD:
• 4 Ch @ 4Ω: 92 W x 4
• 4 Ch @ 2Ω: 152 W x 4
• 2 Ch - (Bridge 1/2; 3/4) @ 4 W 302 W x 2

CEA SPECIFICATIONS
Output power @ 4Ω, ⩽1% THD+N, 14.4 V: 70 W x 4
SN ratio (ref. 1 W output): 75 dBA

SIGNAL CONNECTIONS
Input Stage: 6 channels in High and Low Input, 4 channels / 2 Preouts

DIGITAL SIGNAL PROCESSOR
(32 bit Cirrus Logic; Clock speed: 147 MHz)
Crossover: Full / Hi Pass / Lo Pass / Band Pass
Crossover type and slope: Linkwitz @ 12/18/24/48 dB
Crossover Frequency: 68 steps @ 20 ÷ 20k Hz
Phase inversion: 0° / 180°
Digital Input Equalizer: (to correct HD curve) Audio PreSets
Output Equalizer: Parametrics Equalizers: ±12 dB; 10 pole; 20 - 20k Hz
Time Alignment Distance 0 ÷ 510 cm / 0 to 133.9 in.
Time Alignment Delay 340 to 10 ms
Time Alignment Step 0,08 ms; 2,8 cm / 1.1 in.
SYSTEM PRESETS:
Acoustic Preset 6 Harley Davidson Audio Presets/De EQ

GENERAL REQUIREMENTS
PC connections Type C
Software/PC requirements:
Microsoft Windows(r) (32/64 bit): XP, Vista, Windows 7, Windows 8
Graphic card min. resolution: 800 x 600
Ambient operating temperature range: -20 °C to 80 °C (-4°F to 176°F)

1x Cicada Audio CXX65.2 - Pro Coaxial Speakers 6.5-inch- 2 Ohm, Pair - (CXX65.2)

Features:
Designed for 2014 + H-D® factory designed locations
V8™ Dispersion Guide
Exclusive Cicada Design for 360o sound from tweeter
Rain or Shine™ all weather performance design
Built-In 6dB crossover
PEI tweeter dome for best sound dispersion
Moisture resistant
Brighter sound
More efficiency
Kevlar cone
Extremely lightweight and strong
Moisture resistant
Maximized efficiency
Copper wire voice coils offer great sound while generating less heat
N45H Neo Magnets
High temperature resistant Polycarbonate custom tooled basket
UV protection over all surfaces
5-inch Grills and Hardware are included
Two (2) year warranty

Specification:
2Ω / 6.5-inch high performance coaxial driver
Power handling: 100W RMS/200W MAX
Voice Coils: 1.4-inch/35mm mid-bass and 1-inch/25mm Tweeter
Cone: Kevlar
Tweeter Dome: PEI
Magnet: Neodymium
Sensitivity: 93dB
Frequency response 55 Hz – 20 kHz +/- 3dB
Mounting Depth: 2.26-inch/57mm
Mounting Diameter: 5.43-inch/138mm

1x Cicada Audio CXX69.2 - Pro Coaxial Speakers 6x9-inch - 2 Ohm - 2-inch voice coil, Pair - (CXX69.2)

FEATURES:
V8™ Dispersion Guide
Exclusive Cicada Design for 360o sound from tweeter
Rain or Shine™ all weather performance design
Built-In 6dB crossover
Available in 4- or 2-Ohm versions
PEI tweeter dome for best sound dispersion
Moisture resistant
Brighter sound
More efficiency
Kevlar cone
Extremely lightweight and strong
Moisture resistant
Maximized efficiency
Copper wire voice coils offer great sound while generating less heat
N45H Neo Magnets
High temperature resistant Polycarbonate custom tooled basket
UV protection over all surfaces
Two (2) year warranty

SPECIFICATIONS:
2Ω / 6X9-inch high performance coaxial driver
Power handling: 200W RMS/400W MAX
Voice Coils: 2.0-inch/49mm Mid-bass and 1.2-inch/31mm Tweeter
Cone: Kevlar
Tweeter Dome: PEI
Magnet: Neodymium
Sensitivity: 93dB
Frequency response 50 Hz– 20 kHz +/- 3dB
Mounting Depth: 2.7-inch/69mm
Mounting Diameter: 6.4-inch/163mm X 9.2-inch/234mm