Description
Included in this kit
This bundle includes a Cicada Audio FLX1000.4 - 4 Channel x 225 Watts @ 2 Ohm Amplifier, a Cicada Audio CHX65.2 - Pro Coaxial Horn Loaded Speakers 6.5-inch - 2 Ohm, Pair, a Cicada Audio CHX69.2 - Pro Coaxial Horn Loaded Speakers 6x9-inch - 2 Ohm, Pair, a Cicada Audio HDFLXPro4K - 4-Channel FLX Wiring Harness Kit with 4 AWG PWR Wire, a Cicada Audio CHDRGG - H-D 2014-2023 RG Kidney Grill - PR, a Cicada Audio CHDSGG - H-D 2014-2023 SG Round Grill, Pair, a Cicada Audio CHDLID - H-D 2014-2023 LID KIT/NO Speakers - PR, a Cicada Audio 14HDAR-RG - CX/DSP/FLX Amplifier Mounting System H-D® Road Glide ®, and a Cicada Audio 14HDAR-SG - CX/DSP/FLX Amplifier Mounting System H-D® Street Glide ®.
1x Cicada Audio FLX1000.4 - 4 Channel x 225 Watts @ 2 Ohm Amplifier - (FLX1000.4)
4 CHANNEL POWER AMPLIFIER
4 X 150 WRMS into 4 ohms @ 12.5 Vdc
4 X 168 WRMS into 4 ohms @ 14.4 Vdc
4 X 220 WRMS into 2 ohms @ 12.5 Vdc
4 X 254 WRMS into 2 ohms @ 14.4 Vdc
BRIDGED MONO – 2 CHANNEL
2 X 461 WRMS into 4 ohms @ 12.5 Vdc
2 X 530 WRMS into 4 ohms @ 14.4 Vdc
Frequency response – 20-20,000 +/- 3dB THD < 0.5%
Operating Voltage: 8V – 16V
Current Draw (Music): 60 A
Current Draw (Max): 116 A
Recommended Fuse (Music): 120 A
Total Efficiency: 79%
Damping Factor: 200
SNR: 91dB
Crossover LPF/FULL/HPF: 30 TO 300Hz
Slope:12dB per octave
Gain: 0.2V – 12 Vac
Turn-On Configuration: REM/DC
THD + N (10% Rated Power): 0.1%
Product Dimensions (Inches / Millimeters): 6.0 x 4.9 x 2.0 in / 152 x 124 x 51 mm
1x Cicada Audio CHX65.2 - Pro Coaxial Horn Loaded Speakers 6.5-inch - 2 Ohm, Pair - (CHX65.2)
FEATURES:
Designed for 2014+ H-D® factory designed locations
Nanofram™ Horn Cover
Exclusive Cicada All-Weather Design for protection from rain
N35SHSH Neo magnet
Water proofing, UV protected
External 12dB crossover with optional -3/-6 tweeter resistor pack
Available in 4- or 2-Ω versions
Aluminum tweeter diaphragm material
Brighter sound
More efficient
Carbon Matrix Composite™ (CMC™) cone
Lightweight / rigid / high temp
Maximized efficiency / super strong
Die cast Aluminum custom tooled basket
Warranty: 2 years
Specifications
6.5” PRO coaxial horn driver
Power handling: 300W RMS/600W MAX
Voice Coils: 2.0”/51mm mid-bass & 1.75”/44mm Tweeter
High temperature Design
Cone: Carbon Matrix Composite™
Tweeter Dome: Aluminum
Crossover: 12dB external custom tooled, vented, encased crossover
Tweeter Attenuation: -3/-6 dB heat sink encased resistor pack
Magnet: Neodymium
Sensitivity: 92dB
response 70hz-20Khz +/- 4dB
Mounting Depth: 2.64”/67mm
Mounting Diameter: 5.67”/144mm
1x Cicada Audio CHX69.2 - Pro Coaxial Horn Loaded Speakers 6x9-inch - 2 Ohm, Pair - (CHX69.2)
FEATURES:
Nanofram™ Horn Cover
Exclusive Cicada All-Weather Design for protection from rain
Rain or Shine™ all weather performance design
Available in 4 or 2Ω versions
Aluminum tweeter diaphragm material
Brighter sound
More efficient
1.75″ OFC copper wire tweeter voice coils offer great sound while generating less heat
External 12dB crossover with optional -3/-6 tweeter resistor attenuator
Carbon Matrix Composite™ (CMC™) cone
Lightweight / rigid / high temp
Maximized efficiency / super strong
Black Coat™ 2.5-inch high conductivity, low resistance OFC copper wire mid-bass voice coil ensures extreme temperature thermal performance
N35SH Neodymium magnet
Die cast Aluminum custom tooled basket with Vortex Flow Venting™
Warranty: 2 years
SPECIFICATIONS:
2Ω – 6X9-inch PRO coaxial horn driver
Power handling: 400W RMS/800W MAX
Voice Coil: 2.5-inch/64mm Mid-bass & 1.75-inch/44mm Tweeter
High temperature design
Tweeter Dome: Aluminum
Crossover: 12dB external custom tooled, vented, encased crossover
Tweeter Attenuation: -3/-6 dB heat sink encased resistor crossover
Cone: Carbon Matrix Composite™
Magnet: Neodymium
Sensitivity: 92dB, 1W / 1M
Frequency Response: 46Hz – 20kHz +/- 3dB
Mounting Depth: 3.75-inch/96mm
Mounting Diameter: 5.7-inch/145mm X 8.5-inch/216mm
1x Cicada Audio HDFLXPro4K - 4-Channel FLX Wiring Harness Kit with 4 AWG PWR Wire - (HDFLXPro4K)
HDFIM Front input harness with 47-ohm resistors – Molex
HDRIM Rear input harness with 47-ohm resistors – Molex
HDBDAFO Front output harness – Ferrules
HDBDARO Rear output harness w/ 8 FT extension – Ferrules
HDPG4K 4-Gauge Power/Ground Kit
1x Cicada Audio CHDRGG - H-D 2014-2023 RG Kidney Grill - PR - (CHDRGG)
Custom tooled Road Glide(R) replacement grill for increased height for CH/CM series speakers.
1x Cicada Audio CHDSGG - H-D 2014-2023 SG Round Grill, Pair - (CHDSGG)
Custom tooled Street Glide® replacement grills add additional depth required for aftermarket speaker upgrades.
1x Cicada Audio CHDLID - H-D 2014-2023 LID KIT/NO Speakers - PR - (CHDLID)
Allows for the use of CH69 (Cast Frames) and CX69 (Plastic Frames) mounted into the factory Harley Davidson® bag lids.
Black finish allows for matching to any color bike. No need for additional color match painting.
1x Cicada Audio 14HDAR-RG - CX/DSP/FLX Amplifier Mounting System H-D® Road Glide ® - (14HDAR-RG)
Amplifier Mounting Rack for 2014-2023 H-D® Road Glide®
HASSLE-FREE INSTALLATION
Mount amp to stainless steel chassis and easily slide in under the fairing mounted radio.
NOTE: Place amplifier input side toward the driver, power and ground input toward the headlight!
Powder coated
Stainless steel construction
Mounting hardware included
Designed for CX/FLX/DSP600.4D style amplifiers only
1x Cicada Audio 14HDAR-SG - CX/DSP/FLX Amplifier Mounting System H-D® Street Glide ® - (14HDAR-SG)
Amplifier Mounting Rack for 2014-2023 H-D® Street Glide®
HASSLE-FREE INSTALLATION
Velcro® mount amp to stainless steel tray between the head unit and the headlight.
Powder coated
Stainless steel construction
Mounting hardware included
Designed for CX/FLX/DSP600.4D style amplifiers only