Description
Included in this kit
This bundle includes a Cicada Audio FLX700.4 - 4 Channel x 175 Watts @ 2 Ohm Amplifier, a Cicada Audio CX65.2 - Coaxial Speakers 6.5-inch - 2 Ohm, Pair, a Cicada Audio CX69.2 - Coaxial Speakers 6x9-inch - 2 Ohm, Pair, a Cicada Audio HDFLXPro4K - 4-Channel FLX Wiring Harness Kit with 4 AWG PWR Wire, a Cicada Audio CHDRGG - H-D 2014-2023 RG Kidney Grill - PR, a Cicada Audio CHDSGG - H-D 2014-2023 SG Round Grill, Pair, a Cicada Audio CHDLID - H-D 2014-2023 LID KIT/NO Speakers - PR, a Cicada Audio 14HDAR-RG - CX/DSP/FLX Amplifier Mounting System H-D® Road Glide ®, and a Cicada Audio 14HDAR-SG - CX/DSP/FLX Amplifier Mounting System H-D® Street Glide ®.
1x Cicada Audio FLX700.4 - 4 Channel x 175 Watts @ 2 Ohm Amplifier - (FLX700.4)
4 CHANNEL POWER AMPLIFIER
4 X 110 WRMS into 4 ohms @ 12.5 Vdc
4 X 128 WRMS into 4 ohms @ 14.4 Vdc
4 X 140 WRMS into 2 ohms @ 12.5 Vdc
4 X 175 WRMS into 2 ohms @ 14.4 Vdc
BRIDGED MONO – 2 CHANNEL
2 X 261 WRMS into 4 ohms @ 12.5 Vdc
2 X 302 WRMS into 4 ohms @ 14.4 Vdc
Frequency response – 20-20,000 +/- 3 dB THD < 0.5%
Operating Voltage: 8 V – 16 V
Current Draw (Music): 60 A
Current Draw (Max): 116 A
Recommended Fuse (Music): 120 A
Total Efficiency: 79%
Damping Factor: 200
SNR: 91dB
Crossover LPF/FULL/HPF: 30 TO 300 Hz
Slope:12 dB per octave
Gain: 0.2 V – 12 Vac
Turn-On Configuration: REM/DC
THD + N (10% Rated Power): 0.1%
Product Dimensions (Inches / Millimeters): 4.5 x 4.9 x 2.0 in / 114 x 124 x 51 mm
1x Cicada Audio CX65.2 - Coaxial Speakers 6.5-inch - 2 Ohm, Pair - (CX65.2)
• 100W RMS/200 MAX Power Handling
• Neodymium High Energy/ Light Weight N35 Magnet structure
• WaterProof IMPP Cone with NBR surrounds
• Heavy Duty/ Injected High Temp Polymer Frame.
• 1.4” 2 Ohm – High Temp Voice Coil (Black Coat™) Voice Coil MidBass
• 1.0” PEI dome tweeter with Neodymium magnet
• DPSH® “Dual-Phase Slot Horn”
• Advanced Voice Coil Heat Sink Design for Better Heat Dissipation
• Frequency Response: 54Hz -20Khz+/-5dB
• High Sensitivity: 94dB 1W/1M Average (1W/1M - 2.83V)
• Built in 6dB Crossover
TECHNICAL SPECIFICATIONS
Component High Efficiency: CoAx Driver
Provided inline crossover Hi-pass filter @ 6 kHz - 6 dB Oct.
Size in. / mm: 6.5 (165)
Power Handling (EACH) W peak 200W - Hi-pass filtered @ 100Hz - 12 dB Oct
Impedance: 2 Ohm
Frequency Response Hz 65Hz-20k +/- 5dB
Sensitivity dB/SPL 94dB Average (1W/1M -2.83V)
Voice Coil Ø in. (mm): 1.4 (35.5)Mid / 1.0 (25) Tweeter
Magnet Neodymium N35H
Dome Aluminium
Weight of 1 Speaker lb. (kg): 2.1 (0.95)
ELECTRO-ACOUSTIC PARAMETERS - MIDBASS
D inches / mm 6.5 / 165
Re 2 Ohms
Fs Hz 70
Le mH @ 1 kHz 0,03
Vas I 8.95
Mms g 12.0
Cms mm/N 0.434
BL T m 6.09
Qts 0.363
Qes 0.387
Qms 6.017
Spl dB 94dB Average (1W/1M -2.83V)
1x Cicada Audio CX69.2 - Coaxial Speakers 6x9-inch - 2 Ohm, Pair - (CX69.2)
• 125WRMS/250 MAX Power Handling
• Neodymium High Energy/ Light Weight N35H Magnet structure
• WaterProof IMPP Cone with NBR surrounds
• Heavy Duty/ Injected High Temp Polymer Frame.
• 1.4” 2 Ohm – High Temp Voice Coil (Black Coat™) Voice Coil MidBass
• 1.0” PEI dome tweeter with Neodymium magnet
• DPSH® “Dual-Phase Slot Horn”
• Advanced Voice Coil Heat Sink Design for Better Heat Dissipation
• Frequency Response: 53.6Hz -20Khz+/-5dB
• High Sensitivity: 95.5dB (1W/1M - 2.83V)
• Built in 6dB Crossover
TECHNICAL SPECIFICATIONS
Component: High Efficiency CoAx Driver
Provided inline crossover Hi-pass filter @ 6 kHz - 6 dB Oct
Size in. / mm: 6 X 9 (163 X 234)
Power Handling W peak 250W - Hi-pass filtered** @ 100Hz - 12 dB Oct.
Impedance 2 Ohm
Frequency Response Hz: 45Hz-20k +/- 5dB
Sensitivity dB/SPL 95.5dB: (1W/1M -2.83V)
Voice Coil Ø in. (mm): 1.4 (35) Mid / 1.0 (25) Tweeter
Magnet: Neodymium N35H
Dome: PEI
Weight of 1 Speaker (kg) lb.: (1.04) 2.3
ELECTRO-ACOUSTIC PARAMETERS - MIDBASS
D inches / mm: 6 X 9 (163 X 234)
Re Ω: 2
Fs Hz: 53.6
Le mH: @ 1 kHz 0,03
Vas I: 25.89
Mms g: 22
Cms mm/N: 0.431
BL T• m: 6.371
Qts: 0.548
Qes: 0.609
Qms: 5.488
Spl dB: 95.5dB (1W/1M -2.83V)
1x Cicada Audio HDFLXPro4K - 4-Channel FLX Wiring Harness Kit with 4 AWG PWR Wire - (HDFLXPro4K)
HDFIM Front input harness with 47-ohm resistors – Molex
HDRIM Rear input harness with 47-ohm resistors – Molex
HDBDAFO Front output harness – Ferrules
HDBDARO Rear output harness w/ 8 FT extension – Ferrules
HDPG4K 4-Gauge Power/Ground Kit
1x Cicada Audio CHDRGG - H-D 2014-2023 RG Kidney Grill - PR - (CHDRGG)
Custom tooled Road Glide(R) replacement grill for increased height for CH/CM series speakers.
1x Cicada Audio CHDSGG - H-D 2014-2023 SG Round Grill, Pair - (CHDSGG)
Custom tooled Street Glide® replacement grills add additional depth required for aftermarket speaker upgrades.
1x Cicada Audio CHDLID - H-D 2014-2023 LID KIT/NO Speakers - PR - (CHDLID)
Allows for the use of CH69 (Cast Frames) and CX69 (Plastic Frames) mounted into the factory Harley Davidson® bag lids.
Black finish allows for matching to any color bike. No need for additional color match painting.
1x Cicada Audio 14HDAR-RG - CX/DSP/FLX Amplifier Mounting System H-D® Road Glide ® - (14HDAR-RG)
Amplifier Mounting Rack for 2014-2023 H-D® Road Glide®
HASSLE-FREE INSTALLATION
Mount amp to stainless steel chassis and easily slide in under the fairing mounted radio.
NOTE: Place amplifier input side toward the driver, power and ground input toward the headlight!
Powder coated
Stainless steel construction
Mounting hardware included
Designed for CX/FLX/DSP600.4D style amplifiers only
1x Cicada Audio 14HDAR-SG - CX/DSP/FLX Amplifier Mounting System H-D® Street Glide ® - (14HDAR-SG)
Amplifier Mounting Rack for 2014-2023 H-D® Street Glide®
HASSLE-FREE INSTALLATION
Velcro® mount amp to stainless steel tray between the head unit and the headlight.
Powder coated
Stainless steel construction
Mounting hardware included
Designed for CX/FLX/DSP600.4D style amplifiers only