Description
Kicker 46CXA6605 CX660.5 660 Watt RMS 2-Ohm Stable 5-Channel Amplifier
Using Class A/B power, this amp features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump.
CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality.
This CX amplifier delivers as much as 90 watts into four full-range channels or 180 watts into two-bridged channels, plus as much as 300 watts into one bass channel. See below for more details.
Features:
• Class A/B full-range channels
• Class D bass channel included for one amp to run an entire system
• Three-second turn-on/off delay to eliminate unwanted interference
• Variable 12dB crossovers provides control to dial in perfect sound
• KickEQ™ 6dB variable bass boost for those additional low frequencies
• 24dB subsonic filter for protection from potentially damaging frequencies
• FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
• Accepts up to 40-volt input signal
• Small footprint for easier installation
• Vertical mounting hardware included for another unique look
Specifications:
• MODEL - CXA660.5
• Power (watts/ch) 4 Ohm Stereo - 65x4
• Power (watts/ch) 2 Ohm Stereo - 90x4
• Power (watts/ch) 4 Ohm Mono - 180x2
• Power (watts/ch) 4 Ohm Mono Sub Ch - 150x1
• Power (watts/ch) 2 Ohm Mono Sub Ch - 300x1
• CXRC Remote Bass Capable (sold sep.) - yes
• Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17 W x ...L) - 14-1/8, 35.7
• Frequency Response (Hz): - 10Hz-20kHz
• Frequency Response (Hz – Sub Ch.): - 25Hz-200Hz
• Input Sensitivity: - 250mV-10V (Low Level), 1V-40V (High Level)
• Signal-to-Noise Ratio: - 90dB
• Active Crossover: - Amp 1-2: High Pass 10-200Hz @ 12dB/Octave, Sub Channel: Low Pass 50-200Hz @ 12dB/Octave
• Subsonic Filter: - 25Hz @24dB/Octave
• KickEQ™ Boost - Variable 0-6dB @40Hz
Using Class A/B power, this amp features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump.
CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality.
This CX amplifier delivers as much as 90 watts into four full-range channels or 180 watts into two-bridged channels, plus as much as 300 watts into one bass channel. See below for more details.
Features:
• Class A/B full-range channels
• Class D bass channel included for one amp to run an entire system
• Three-second turn-on/off delay to eliminate unwanted interference
• Variable 12dB crossovers provides control to dial in perfect sound
• KickEQ™ 6dB variable bass boost for those additional low frequencies
• 24dB subsonic filter for protection from potentially damaging frequencies
• FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
• Accepts up to 40-volt input signal
• Small footprint for easier installation
• Vertical mounting hardware included for another unique look
Specifications:
• MODEL - CXA660.5
• Power (watts/ch) 4 Ohm Stereo - 65x4
• Power (watts/ch) 2 Ohm Stereo - 90x4
• Power (watts/ch) 4 Ohm Mono - 180x2
• Power (watts/ch) 4 Ohm Mono Sub Ch - 150x1
• Power (watts/ch) 2 Ohm Mono Sub Ch - 300x1
• CXRC Remote Bass Capable (sold sep.) - yes
• Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17 W x ...L) - 14-1/8, 35.7
• Frequency Response (Hz): - 10Hz-20kHz
• Frequency Response (Hz – Sub Ch.): - 25Hz-200Hz
• Input Sensitivity: - 250mV-10V (Low Level), 1V-40V (High Level)
• Signal-to-Noise Ratio: - 90dB
• Active Crossover: - Amp 1-2: High Pass 10-200Hz @ 12dB/Octave, Sub Channel: Low Pass 50-200Hz @ 12dB/Octave
• Subsonic Filter: - 25Hz @24dB/Octave
• KickEQ™ Boost - Variable 0-6dB @40Hz
