null
Sale
CreativeCare

JL Audio 6W3v3-4:6.5-inch (165 mm) Subwoofer Driver 4 Ohm - Open Box

Shop All: JL Audio

No reviews yet Write a Review
SKU:
6W3v3-4-UOB-K
Condition:
Used
$299.99
$259.99
$234.00
You save $65.99
$299.99
$259.99
$234.00
You save $65.99

Description

6W3v3-4

W3v3 6.5-inch Subwoofer Driver (150 W, 4 Ω)


W3v3 Product Spotlight

If you need a small-format subwoofer that really delivers in extremely small enclosures, this is where your search ends. The 6W3v3 is a true subwoofer, through-and-through. It employs the same technologies as its larger diameter brethren to deliver a whopping 0.35 in. (8.9 mm) one-way linear excursion.

The 6W3v3-4 is best used with amplifier power in the 50W - 150W range and is optimized to operate in a tiny 0.15 cu. ft. (4.2 l) sealed enclosure, or a 0.25 cu. ft. (7.1 l) ported enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab.

General Specifications


Continuous Power Handling (RMS) 150 W
Recommended Amplifier Power (RMS) 50 - 150 W
Nominal Impedance (Znom) 4 Ω

Physical Specifications


Nominal Diameter 6.5 in / 165 mm
Overall Diameter (A) 6.85 in / 174 mm
Mounting Hole Diameter (B) 5.5 in / 140 mm
Bolt Hole Circle Diameter (C) 6.125 in / 156 mm
Motor Outer Diameter (D) 4.25 in / 108 mm
Mounting Depth (E) 4.25 in / 108 mm
Driver Displacement 0.02 cu ft / 0.57 L
Net Weight 6.1 lb / 2.8 kg

Parameters

Free Air Resonance (Fs) 41.80 Hz
Electrical “Q” (Qes) 0.533
Mechanical “Q” (Qms) 11.027
Total Speaker “Q” (Qts) 0.508
Equivalent Compliance (Vas) 0.181 cu ft / 5.13 L
One-Way Linear Excursion (Xmax)* 0.35 in / 8.89 mm
Reference Efficiency (no) 0.07%
Efficiency (1 W / 1 m)** 80.49 dB SPL
Effective Piston Area (Sd) 17.36 sq in / 0.0112 sq m
DC Resistance (Re) 3.476 Ω

* Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied.
** For parallel-wired voice coils, divide "Re" by 4. All other specifications remain the same.
*** Re (DC resistance) is measured with the voice coils in series, for parallel-wired specification divide Re by 4. All other specifications remain the same.

Sealed Enclosure Specifications


Wall Thickness 0.5 in / 13 mm
Front Baffle Thickness 0.5 in / 13 mm
Volume (net int.) 0.15 cu ft / 4.2 L
External Width (W) 8.5 in / 216 mm
External Height (H) 8.5 in / 216 mm
External Depth (D) 6.25 in / 159 mm
F3 58.43 Hz
Fc 62.11 Hz
Qtc 0.7548

Enclosure Notes
* The enclosure recommendations listed are external dimensions which assume the use of 1/2 in (13 mm) thick material. Do not use any material with a thickness of less than 1/2 in (13 mm) as this may compromise the rigidity of the enclosure.
* All enclosure volumes listed are net internal volumes! Box volume displacement, port displacement and brace displacement must be added to obtain the final gross internal volume. All enclosure dimensions listed have already taken this into account.
* When using two subwoofers in a common enclosure simply double the required volume and, in the case of a ported enclosure, use two times the recommended port(s).
* We recommend the use of this speaker in a bi-amplified system using high-quality satellite speakers and amplifiers. We do not recommend the use of this subwoofer with a passive crossover (coil), as this type of device will adversely affect performance.

Safety Notice
Prolonged exposure to sound pressure levels in excess of 100dB can cause permanent hearing loss. This high-performance speaker can exceed this level. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity.

When installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. We recommend bolting the enclosure through the metal of the floorpan or the frame of the vehicle with large diameter washers for reinforcement. If an enclosure is not firmly attached, it can become a projectile in a collision. This is particularly important in a hatchback, station wagon, sports utility vehicle, or van.

Ported Enclosure Specifications


Wall Thickness 0.5 in / 13 mm
Front Baffle Thickness 0.5 in / 13 mm
Volume (net int.) 0.25 cu ft / 7.1 L
External Width (W) 14.50 in / 368 mm
External Height (H) 10.125 in / 257 mm
External Depth (D) 5.25 in / 133 mm
Internal Slot Port Width (SW) 4.25 in / 108 mm
Internal Slot Port Height (SH) 0.5 in / 13 mm
Internal Slot Port Length (SL) 14.75 in / 374 mm
Port Extension Length (EL) 13 in / 330 mm
Tuning Frequency (Fb) 38 Hz
F3 34.92 Hz

Used Frequently Asked Questions

  • What does used mean? Used products may be unused customer returns that are essentially "new" items, or they may be previously installed products that were returned under warranty or during our return policy period.
  • What is the warranty? All of our used items come with a 90-day warranty.
  • What's it look like? All of our used items are inspected and graded by our returns team at our facilities. They will test them and grade them to one of four standard gradings: Used Open Box, Used Very Good, Used Good, and Used Acceptable. Please see the following descriptions of each grade - also note that if an item falls under ANY of the criteria for a certain grade, even though the rest of the product is better, we will give it the lowest grade.
  • Used Open Box An item in perfect working condition. Original protective wrapping may be missing, but the original packaging is intact and in good condition with minor damage possible. Instructions are included.
  • Used Very Good A well-cared-for item with limited use, remains in good working condition. The item may show some limited signs of wear,small scratches,cosmetic blemishes. Item may arrive with damaged packaging or be repackaged and could be missing some accessories.
  • Used Good The item shows wear from use, remains in good condition and functions properly. May have damaged packaging or be repackaged. It may be marked, have identifying markings on it, have minor cosmetic damage. It may be missing some parts or accessories.
  • Used Acceptable The item is fairly worn but continues to function properly. While repackaged; signs of wear can include aesthetic issues; scratches, dents. The item may have markings on it or show signs of previous use. Item may be missing some parts or accessories.
  • Have more questions? Call us, send us a chat, or an email. We'll be able to answer any additional questions you may have.

Extra Information

Brand:
JL Audio
Weight:
7.36 LBS
Manufacturer SKU:
92145
RMS Power In Watts:
150
Size:
6 Inch
Voice Coil:
Single
Impedance Per Voice Coil:
4
UPC:
699440921459
Bundle:
No
Feature 1:
This newest generation of W3’s benefits from a whole suite of advanced technologies originally developed for our flagship W7’s.
Feature 2:
A mineral-filled polypropylene upper cone body with a metallic JL Audio logo medallion provide a simple, classy look.
Feature 3:
W3v3's are built to exacting quality standards in our Miramar, Florida factory with global components.
Feature 4:
This acclaimed subwoofer driver strikes an outstanding balance in power handling, enclosure requirements and excursion to deliver excellent results in medium power applications.
Condition:
USED
Manual:
Click Here
Weight:
7.3600 lbs
Shipping:
Free 2-Day Shipping!
Special pricing:
Sale!
CreativeCare:
Includes CreativeCare one year extended warranty!

Warranty Information

JL Audio

Related Products