Description
Included in this kit
This bundle includes 1x AudioControl D-6.1200 6-Channel Car Amplifier with Digital Signal Processing, and 2x AudioControl AC-LGD 20 Load Generating Device.
1x AudioControl D-6.1200 6-Channel Car Amplifier with Digital Signal Processing - (D-6.1200)
Audio Control D-6.1200 6-Channel Car Amplifier with Digital Signal Processing
Product Highlights:
6-channel car amplifier with digital signal processing
125 watts RMS x 6 at 4 ohms (200 watts RMS x 6 at 2 ohms)
400 watts RMS x 3 bridged at 4 ohms (4-ohm stable in bridged mode)
all controls and adjustments accessible via PC, Android, or iOS device (AudioControl's Smart-User DSP software included)
variable high- and low-pass filters (20-20,000 Hz, 12 or 24 dB/octave)
subsonic filter at 32 Hz
AccuBASS circuitry for improved bass response
30-band graphic EQ, parametric filters, phase correction
time delay/alignment for inputs and outputs
RTA (real-time analyzers) for inputs and outputs
Other Features:
MILC™ (Maximum Input Level Control) LED optimization and clip indicators
GTO signal-sensing turn-on
8 speaker-level inputs (summable)
6 preamp inputs
2 preamp outputs
fuse rating: 40A x 3
wiring and hardware not included with amplifier
4-gauge power and ground wires recommended
dimensions: 12"W x 2-1/8"H x 8"D
2x AudioControl AC-LGD 20 Load Generating Device - (AC-LGD 20)
Today’s factory amplifiers feature built in protection circuits which can mute some or all audio outputs when the factory speakers are removed. The AC-LGD 20 has been designed to generate load and stabilize signal from amplified factory system to ensure the best possible audio.
The AC-LGD 20s come in pairs and can be easily connected to your AudioControl Factory System Upgrade product with the pre-wired connectors. The AC-LGD 20 is installed between the factory speaker outputs and your line output converter or speaker level inputs on your amp or processor. Each AC-LGD 20 pair comes pre-wired with EIA standard wire colors for front and rear connections.
Specifications:
General
Maximum Input Voltage: 15 Vrms (50 watts)
Input Impedance: 20 Ohms
Weights & Dimensions
Dimensions (without wires/connectors): 2.3″L x 1.0″W x .06″H
Dimensions (with wires/connectors): 9.75″L x 1.0″D x .06″H
Weight (single LGD): 1.4oz (39g)
In The Box: One pair of prewired AC-LGD 20s