Description
Included in this kit
This bundle includes 1x AudioControl AC-LGD Load Generating Device & Signal Stabilizer, and 1x AudioControl LC-1.800 High-Power Mono Subwoofer Amplifier with Accubass.
1x AudioControl AC-LGD Load Generating Device & Signal Stabilizer - (AC-LGD)
Audio Control AC-LGD Load Generating Device & Signal Stabilizer
Today’s factory systems include more Class D amplifier technology which can mute, distort or emit damaging frequencies to your new aftermarket audio equipment when the factory speakers are removed. Using carefully selected resistors and a Zobel Network, the AC-LGD has been designed to generate load and stabilize signal from the factory system to ensure the best possible audio. The LGDs come in pairs and can be easily connected to your AudioControl Factory System Upgrade product with the pre-wired connectors. The LGD is installed between the factory speaker outputs and your line output converter or speaker level inputs on your amp or processor. Each LGD pair comes with standard wire colors for front and rear connections. SPECIFICATIONS WEIGHTS & DIMENSIONS Dimensions (without wires/connectors): 2.3″L x 1.0″W x .06″H Dimensions (with wires/connectors): 9.75″L x 1.0″D x .06″H Weight (single LGD): 1.4oz (39g) IN THE BOX: One pair of Load Generating Devices (LGDs)
1x AudioControl LC-1.800 High-Power Mono Subwoofer Amplifier with Accubass - (LC-1.800)
Audio Control LC-1.800 High-Power Mono Subwoofer Amplifier with Accubass
When you demand the perfect blend of power and performance, AudioControl provides answers and the LC-1.800 is no exception.
No matter the install, you can be assured power will meet and exceed expectations with 800 watts at 2 ohms. The mix of high level and low level inputs mean you have the widest input voltage range in the industry. AudioControl’s patented AccuBASS® circuit is the only way to properly overcome factory bass roll-off and heavily equalized factory bass settings.
Enjoy loud, clean and articulate bass combined with the best warranty available with the LC-1.800 amplifier.
FEATURES
Subwoofer amplifier with patented AccuBASS®
800 watts @ 2 ohms
500 watts @ 4 ohms
AccuBASS® Processing
MILC™ Maximum Input Level Control (Patent Pending)
GTO™ Signal Sense
24 dB/octave Linkwitz-Riley Alignment crossover
Speaker level and preamp inputs
Optional ACR-1 assignable remote control
Solid One-Piece Aluminum Chassis
SPECIFICATIONS
INPUTS
Preamp Inputs: 2 balanced
Input Voltage Range: 500 mV – 6 Vrms
OUTPUTS
Rated Continuous (RMS) Power at 14.4V:
4 Ω – 500 W RMS
2 Ω – 800 W RMS
PERFORMANCE
Frequency Response: 10 Hz – 30 kHz
Signal to Noise: 102 dBa, Ref 500 W @ 4 Ohm
Damping Factor: 670 at 10 V, 4 Ohm Output, 100 Hz
THD+N: < 0.01%
Minimum Power / Ground Wire Gauge: 3 AWG wire
Fuse Rating: 2 x 40 A
Crossover: 24 dB/octave Linkwitz-Riley, Adjustable From 30 Hz – 230 Hz
PFM Subsonic Filter: 24 Hz
WEIGHTS & DIMENSIONS
Dimensions: 9″W x 7.95″D x 2.1″H
Weight: 5.0lbs (2.0kg)
IN THE BOX: LC-1.800, Speaker connectors, Fuses, Manual, Warranty