Description
Included in this kit
This bundle includes 1x AudioControl LC-1.800 High-Power Mono Subwoofer Amplifier with Accubass, and 1x AudioControl AC-LGD 60 Load Generating Device & Signal Stabilizer.
1x AudioControl LC-1.800 High-Power Mono Subwoofer Amplifier with Accubass - (LC-1.800)
Audio Control LC-1.800 High-Power Mono Subwoofer Amplifier with Accubass
When you demand the perfect blend of power and performance, AudioControl provides answers and the LC-1.800 is no exception.
No matter the install, you can be assured power will meet and exceed expectations with 800 watts at 2 ohms. The mix of high level and low level inputs mean you have the widest input voltage range in the industry. AudioControl’s patented AccuBASS® circuit is the only way to properly overcome factory bass roll-off and heavily equalized factory bass settings.
Enjoy loud, clean and articulate bass combined with the best warranty available with the LC-1.800 amplifier.
FEATURES
Subwoofer amplifier with patented AccuBASS®
800 watts @ 2 ohms
500 watts @ 4 ohms
AccuBASS® Processing
MILC™ Maximum Input Level Control (Patent Pending)
GTO™ Signal Sense
24 dB/octave Linkwitz-Riley Alignment crossover
Speaker level and preamp inputs
Optional ACR-1 assignable remote control
Solid One-Piece Aluminum Chassis
SPECIFICATIONS
INPUTS
Preamp Inputs: 2 balanced
Input Voltage Range: 500 mV – 6 Vrms
OUTPUTS
Rated Continuous (RMS) Power at 14.4V:
4 Ω – 500 W RMS
2 Ω – 800 W RMS
PERFORMANCE
Frequency Response: 10 Hz – 30 kHz
Signal to Noise: 102 dBa, Ref 500 W @ 4 Ohm
Damping Factor: 670 at 10 V, 4 Ohm Output, 100 Hz
THD+N: < 0.01%
Minimum Power / Ground Wire Gauge: 3 AWG wire
Fuse Rating: 2 x 40 A
Crossover: 24 dB/octave Linkwitz-Riley, Adjustable From 30 Hz – 230 Hz
PFM Subsonic Filter: 24 Hz
WEIGHTS & DIMENSIONS
Dimensions: 9″W x 7.95″D x 2.1″H
Weight: 5.0lbs (2.0kg)
IN THE BOX: LC-1.800, Speaker connectors, Fuses, Manual, Warranty
1x AudioControl AC-LGD 60 Load Generating Device & Signal Stabilizer - (AC-LGD 60)
IDEAL FOR OEM PREMIUM AMPLIFIED DODGE®, CHRYSLER®, JEEP®, MASERATI® SOUND SYSTEMS
Today’s factory amplifiers feature built in protection circuits which can mute some or all audio outputs when the factory speakers are removed. The AC-LGD 60 has been designed to generate load and stabilize signal from amplified factory system to ensure the best possible audio.
The AC-LGD 60s come in pairs and can be easily connected to your AudioControl Factory System Upgrade product with the pre-wired connectors. The AC-LGD 60 is installed between the factory speaker outputs and your line output converter or speaker level inputs on your amp or processor. Each AC-LGD 60 pair comes pre-wired with EIA standard wire colors for front and rear connections.
Specifications:
General:
Maximum Input Voltage: 25 Vrms (150 watts)
Input Impedance: 60 Ohms
Weights & Dimensions
Dimensions (without wires/connectors): 2.3″L x 1.0″W x .06″H
Dimensions (with wires/connectors): 9.75″L x 1.0″D x .06″H
Weight (single LGD): 1.4oz (39g)
In The Box: One pair of pre-wired AC-LGD 60s