Description
Included in this kit
This bundle includes 2x Alpine SPV-65RGB-CAN 6.5” Cage-Mounted Universal Weather-Resistant Coaxial RGB LED Speaker Pods, 1x Clarion CMR-L1 Marine LED Light Controller, and 1x Alpine KTA-450 4-Channel Power Pack Amplifier with Dynamic Peak Power 45W RMS x 4, At 2 Or 4 Ohms.
2x Alpine SPV-65RGB-CAN 6.5” Cage-Mounted Universal Weather-Resistant Coaxial RGB LED Speaker Pods - (SPV-65RGB-CAN)
Alpine Signature Sound – Engineered with Alpine’s signature sound quality, these speaker pods have been tested and proven to outperform the competition. Whether you’re tearing through the dunes or cruising along a forest trail, enjoy crystal-clear highs and rich mid-range tones that cut through the roar of the engine and the rush of the wind.
Built for the Outdoors – Weather can be unpredictable, but your sound doesn’t have to be. These speaker pods feature marine-grade, weather-resistant enclosures and drivers, ensuring top-notch performance even in the harshest environments. Rain, mud, or sun—these speaker pods are equipped to handle it all.
Customizable RGB Lighting - Stand out on the trail with front and rear RGB lighting that can be customized to match your vehicle’s style.
Versatile and Easy Installation - Designed with the adventurer in mind, these speaker pods are equipped with a universal cage-mount system that fits bars ranging from 1.5” to 2” in diameter—standard on most UTVs.
Main Features:
• Enclosed 6.5” Coaxial 2-Way Speaker Pods
• Front & Rear RGB Lighting
• Marine-Grade Weather-Resistant Enclosures & Drivers
• Coated Aluminum Cage-Mount for Easy Installation on 1.5” to 2” Round Bar
• 360-degree Rotational Adjustment
• Satin Black Finish with Mesh Grilles
TECH SPECS
• Woofer Size: 6.5” Cone
• Tweeter Size: 1” Teteron Dome
• Power Handling: 90W RMS / 225W Peak
• Frequency Response: 70Hz to 22kHz
• Impedance: 4 Ohms
• Sensitivity: 88dB
• Linear Excursion (X-Max): 4.9mm (1-Way)
• Speaker IP Rating: IP55
• Assembly IP Rating: IP66
• CTA-2031 Compliant
In the box:
• (x2) SPV-65RGB-CAN Speaker Pod
• (x2) Speaker Terminal
• (x2) RGB Terminal
• (x2) Top Gasket (>2” bar)
• (x2) Top Gasket (≤2” bar)
• (x4) Side Gasket
• Optional Surface Mount Bracket (Sold Seperately)
• Optional RGB Controller (Sold Seperately)
1x Clarion CMR-L1 Marine LED Light Controller - (CMR-L1)
The Clarion CMR-L1 Marine LED light controller adds some flair to Clarion and other RGB LED marine speakers!
Specifications:
• Dynamic Modes 20
• Dynamic Speed Levels 10
• Static Colors 20
• Direct Preset Colors 7
• Brightness Levels 8
• Operating Voltage 10- 15V DC
• Operating Temp Range -4 ° F to + 1 58 ° F, (-20 °C to + 70 °C)
• Operating Frequency 433.92 MHz
• Operating Range* Up to 15 m (49.2 ft)
• Output Capacity 2 A (maximum)
• Recommended Fuse Value 10 A (maximum)
• Dimensions 2. 99 in x 2 in x 1 .07 in
• (Transmitter) 76 mm x 50.8 mm x 27.2 mm
• Dimensions 4.02 in x 3.01 in x 1.42 in
• (Receiver) 102.1 mm x 76.5 mm x 36.1 mm
Notes:
• Install in a dry, well-ventilated location; do not install in an engine compartment or other areas of extreme heat. Do not install where it will be directly exposed to the elements.
• To optimize performance, avoid confined installation locations or areas surrounded by metal; maintain at least 25 cm (10 in) of separation from any audio signal cables.
• Make sure the total amperage demands of all connected LED circuits does not exceed the output capacity of the controller.
• *Install a fuse (not included) at the main +12V power wire (Red) connection point that is appropriate for the total current draw of all LED circuits (up to 10 A).
• For short-circuit protection, we recommend installing a fuse (not included) at EACH speaker's +12V LED connection lead. Refer to your speaker's LED specifications for individual fuse values.
1x Alpine KTA-450 4-Channel Power Pack Amplifier with Dynamic Peak Power 45W RMS x 4, At 2 Or 4 Ohms - (KTA-450)
Alpine KTA-450 4-Channel Power Pack Amplifier with PowerStack Capability
The next generation of Power Pack is here! The compact KTA-450 Power Pack Amplifier utilizes Alpine’s exclusive DPP technology for a big power boost in a small space.
The KTA-450 measures just 7” W x 3.5” H x 1.25” D. For vehicles that do not have the space for a traditional amplifier, the KTA-450’s small size allows it to be tucked away in hidden areas such as in the glove box or behind the radio. It could even be used in a motorcycle’s saddlebag or on a boat.
No Extra Wires! Thanks to the efficient power needs of the DPP technology, the KTA-450 does not require a new power supply wire at the battery, so installation is fast using the supplied radio power wires. In addition, the KTA-450 uses a 22-pin power harness with a recessed design on one side, so the cables can be tucked-in for a cleaner, less-bulky installation.
Features:
• Compact size, measuring just 7” W x 3.5” H x 1.25” D
• Class D amplifier circuit
• Dynamic Peak Power (DPP) technology doubles the power during dynamic musical passages
• Power Stacking bracket included for mounting to the iLX-W650 7” Mech-less AV Receiver (sold separately)
Specifications:
• Power output 4-Ohm @ 14.4 Volts: 50 W RMS X 4
• Power output 2-Ohm @ 14.4 Volts: 45 W RMS X 4
• Dynamic Peak Power output 4-Ohm @ 14.4 Volts: 100 W RMS X 4
• Dynamic Peak Power output 2-Ohm @ 14.4 Volts: 100 W RMS X 4
• THD 10 W into 4 Ohms: Less Than 0.2%
• THD 10 W into 2 Ohms: Less Than 0.1%
• THD Rated Power 4 Ohms: Less Than 0.1%
• THD Rated Power 2 Ohms: Less Than 0.1%
• S/N Ratio: 1 W into 4 Ohms: >85dB
• Frequency Response:+0/-3 dB 15Hz - 50kHz
• Input Sensitivity: RCA (0.152 - 2.80V), Speaker (0.33 - 6.05V)
• Crossover: Variable HPF/LPF, (OFF/60/80/120Hz)
• Weight: 1.3lb
In the box:
• KTA-450 4-Channel Amplifier
• Input/Output/Power Wire Harness
• Universal Bracket Set
• Cable Tie
• Self Tapping Screw
• W650 Mounting Brackets
